aus irgendeinem grund will bei mir linux einfach nicht laufen
Neutinos startet zwar nur bekomme ich weder bild noch ton
files hab ich alle eingespielt, eventuell kann ja jemand anhand meines log files sehen wodran es liegt.
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0196
will verify ELF image, start= 0x800000, size= 202876
verify sig: 262
Branching to 0x40000
ppcboot 0.6.4 (Mar 2 2002 - 20:44:32)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: xx-xx-xx-xx-xx-xx
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x84A7E (0x1E00 bytes)
FB logo at: 0x868A6 (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x84A22 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 543202 Bytes = 530 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (von alexW) (gcc version 3.0.4) #1 Son Mr 3 00:30:21 CET 200
2
Boot arguments: ro root=/dev/mtdblock/3 console=ttyS0
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/mtdblock/3 console=ttyS0
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30748k available (984k kernel code, 412k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20328kB/6776kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:44:1c2
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k int
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call Real Time Cloc
k Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mice: PS/2 mouse device common for all mice
Loading /share/keymaps/i386/qwertz/de.kmap.gz
Couldnt get a file descriptor referring to the console
event: init ...
Init VES1820 / VES1893
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.28 2002/03/17 16:25:38 happydude Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
der moment ist gekommen...
Oops: kernel access of bad area, sig: 11
NIP: C000B750 XER: C000017F LR: C3885938 SP: C1D7FD90 REGS: c1d7fce0 TRAP: 0300
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: C38AE000, DSISR: C0000000
TASK = c1d7e000[54] 'insmod' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: 00000000 C1D7FD90 C1D7E000 C3889000 C38ADFFC 00020000 C388CFFC 00000020
GPR08: 00000000 C3880000 C3850000 C000B734 00160000 1005E150 01FE7600 01F9FB88
GPR16: 00000000 00000000 00000001 00000000 00009032 01D7FE80 C1D7FDE8 C1C88720
GPR24: 00000003 10043808 00000060 C38AA000 FFFFFFFF C0120000 00068D58 FF0009C0
Call backtrace:
C3885918 C3885C14 C3886268 C0010854 C000249C 10043808 10003A84
10004A8C 10008C88 10008E8C 0FEDF438 00000000
Segmentation fault
write 1 event's ...
write 1 event's ...
Node read from 00080b78: node_crc aa62a0b7, calculated CRC aa62a0b7. dsize 3, cs
ize 3, offset 0, buf c1c887c0
Read 3 bytes to c1c887c0
Data CRC matches calculated CRC d3aea45a
Node read from 00080b78: node_crc aa62a0b7, calculated CRC aa62a0b7. dsize 3, cs
ize 3, offset 0, buf c1c887e0
Read 3 bytes to c1c887e0
Data CRC matches calculated CRC d3aea45a
registering device.
Node read from 00080b78: node_crc aa62a0b7, calculated CRC aa62a0b7. dsize 3, cs
ize 3, offset 0, buf c1c88800
Read 3 bytes to c1c88800
Data CRC matches calculated CRC d3aea45a
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
jffs2_lookup()
jffs2_read_inode(): inode->i_ino == 14
getting inocache
jffs2_get_ino_cache(): ino 14
jffs2_get_ino_cache found c1d9c2e8 for ino 14
jffs2_read_inode(): Got inocache at c1d9c2e8
jffs2_read_inode(): ino #14 nlink is 1
jffs2_get_inode_nodes(): ino #14
Node at 000817b4 is a dirent node
Adding fd "scart.conf", ino #18
jffs2_add_fd_to_list( c01fda10, c1cf7c6c (->00000000))
Dirent "scart.conf" (hash 0xdda40361, ino #18
Node at 00081630 is a dirent node
Adding fd "elitedvb", ino #17
jffs2_add_fd_to_list( c01fda90, c1cf7c6c (->c01fda10))
Dirent "elitedvb" (hash 0x9780aaa4, ino #17
Dirent "scart.conf" (hash 0xdda40361, ino #18
Node at 00081414 is a dirent node
Adding fd "lcdmenu.conf", ino #16
jffs2_add_fd_to_list( c01fdad0, c1cf7c6c (->c01fda90))
Dirent "lcdmenu.conf" (hash 0x428475ed, ino #16
Dirent "elitedvb" (hash 0x9780aaa4, ino #17
Dirent "scart.conf" (hash 0xdda40361, ino #18
Node at 00081290 is a dirent node
Adding fd "zapit", ino #15
jffs2_add_fd_to_list( c1c88800, c1cf7c6c (->c01fdad0))
Dirent "zapit" (hash 0x1452282b, ino #15
Dirent "lcdmenu.conf" (hash 0x428475ed, ino #16
Dirent "elitedvb" (hash 0x9780aaa4, ino #17
Dirent "scart.conf" (hash 0xdda40361, ino #18
Node at 00081208 is a data node
version 5, highest_version now 8
dnode @00081208: ver 5, offset 0000, dsize 0000
node at 0x000811c4 is obsoleted. Ignoring.
node at 0x00081180 is obsoleted. Ignoring.
node at 0x0008113c is obsoleted. Ignoring.
node at 0x000810c8 is obsoleted. Ignoring.
Node at 0004342c is a dirent node
Adding fd "neutrino.conf", ino #32
jffs2_add_fd_to_list( c01fdb10, c1cf7c6c (->c1c88800))
Dirent "zapit" (hash 0x1452282b, ino #15
Dirent "lcdmenu.conf" (hash 0x428475ed, ino #16
Dirent "neutrino.conf" (hash 0x76cbe95d, ino #32
Dirent "elitedvb" (hash 0x9780aaa4, ino #17
Dirent "scart.conf" (hash 0xdda40361, ino #18
Node at 00043364 is a dirent node
Adding fd "controld.conf", ino #31
jffs2_add_fd_to_list( c01fdb50, c1cf7c6c (->c1c88800))
Dirent "zapit" (hash 0x1452282b, ino #15
Dirent "lcdmenu.conf" (hash 0x428475ed, ino #16
Dirent "neutrino.conf" (hash 0x76cbe95d, ino #32
Dirent "elitedvb" (hash 0x9780aaa4, ino #17
Dirent "controld.conf" (hash 0xb93f1d9a, ino #31
Dirent "scart.conf" (hash 0xdda40361, ino #18
metadata @00081208: ver 5
jffs2_read_inode() returning
jffs2_lookup()
jffs2_read_inode(): inode->i_ino == 16
getting inocache
jffs2_get_ino_cache(): ino 16
jffs2_get_ino_cache found c1d9c4b4 for ino 16
jffs2_read_inode(): Got inocache at c1d9c4b4
jffs2_read_inode(): ino #16 nlink is 1
jffs2_get_inode_nodes(): ino #16
Node at 000815a8 is a data node
version 5, highest_version now 5
dnode @000815a8: ver 5, offset 0000, dsize 0000
node at 0x00081564 is obsoleted. Ignoring.
node at 0x00081520 is obsoleted. Ignoring.
Node at 00081448 is a data node
version 2, highest_version now 5
dnode @00081448: ver 2, offset 0000, dsize 0097
node at 0x000813d0 is obsoleted. Ignoring.
jffs2_add_full_dnode_to_inode(ino #16, f c1ad4838, fn c1d9d8a0)
adding node 0000-0097 @0x00081448 on flash, newfrag *c1d9a5a4
frag 0000-0097: 0x00081448 on flash (*c1d9a5a4->00000000)
metadata @000815a8: ver 5
Truncating fraglist to 0x00000097 bytes
jffs2_read_inode() returning
jffs2_do_readpage_nolock(): ino #16, page at offset 0x0
jffs2_readpage: offset 0, end 4096
Reading 0-151 from node at 0x81448
Node read from 00081448: node_crc b952750f, calculated CRC b952750f. dsize 97, c
size 91, offset 0, buf c1aa7000
Read 145 bytes to c1fd0d60
Data CRC matches calculated CRC f913aae2
Decompress 145 bytes from c1fd0d60 to 151 bytes at c1aa7000
node read
node read was OK. Looping
jffs2_readpage: offset 151, end 4096
Filling non-frag hole from 151-4096
readpage finishing
readpage finished
[FONT] FTC_Face_Requester (Arial/Bold)
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 3).
VES1893: attaching VES1893 at 0x10 to adapter
registering frontend...
Node read from 00080b78: node_crc aa62a0b7, calculated CRC aa62a0b7. dsize 3, cs
ize 3, offset 0, buf c1c88b60
Read 3 bytes to c1c88b60
Data CRC matches calculated CRC d3aea45a
gtx-core.c: init_gtx: gtxID 0b
gtx-core.c: init_gtx: loaded AViA GTX core driver
Node read from 00080b78: node_crc aa62a0b7, calculated CRC aa62a0b7. dsize 3, cs
ize 3, offset 0, buf c1c88b80
Read 3 bytes to c1c88b80
Data CRC matches calculated CRC d3aea45a
jffs2_lookup()
gen_dmx: found gtx
gtx_dmx:
jffs2_lookup()
jffs2_read_inode(): inode->i_ino == 26
getting inocache
jffs2_get_ino_cache(): ino 26
jffs2_get_ino_cache found c1d9c554 for ino 26
jffs2_read_inode(): Got inocache at c1d9c554
jffs2_read_inode(): ino #26 nlink is 1
jffs2_get_inode_nodes(): ino #26
Node at 00087e20 is a data node
version 2, highest_version now 2
dnode @00087e20: ver 2, offset 0000, dsize 0800
node at 0x00087da8 is obsoleted. Ignoring.
jffs2_add_full_dnode_to_inode(ino #26, f c1af62f8, fn c1d9d890)
adding node 0000-0800 @0x00087e20 on flash, newfrag *c1d9a5b8
frag 0000-0800: 0x00087e20 on flash (*c1d9a5b8->00000000)
Truncating fraglist to 0x00000800 bytes
jffs2_read_inode() returning
jffs2_do_readpage_nolock(): ino #26, page at offset 0x0
jffs2_readpage: offset 0, end 4096
Reading 0-2048 from node at 0x87e20
Node read from 00087e20: node_crc b951547e, calculated CRC b951547e. dsize 800,
csize 538, offset 0, buf c1a46000
Read 1336 bytes to c1c15000
Data CRC matches calculated CRC 0ed38bfb
Decompress
