PLEASE HELP ME (2) !!! [ENG LANG] Problem mit start...

[tbf2000]

Hi Guys!!!
After 4 months I reapired my beautiful DBOX !!! Finally I'm ready to flash my toy...
I putted it in DEBUG MODE, loaded YADD, and FLASHED with alexW2xBaseimageV1.5.img.

When my dbox start after some seconds it turn off automatically... ...this happen if I choose NEUTRINO and ENIGMA at startUP.
If I choose Maintenace everything is OK... ...I'm able to connect in telnet.

In telnet I gone in /var/tuxbox ...

~/tuxbox > free
total used free shared buffers
Mem: 30984 8684 22300 0 1932
Swap: 0 0 0
Total: 30984 8684 22300


~/tuxbox > ll
drwxr-xr-x 4 root root 0 Jan 1 1970 .
drwxr-xr-x 7 root root 0 Jan 1 1970 ..
drwxrwxrwx 4 root root 0 Dec 31 15:11 config
-rwxr-xr-x 1 root root 42 Jan 1 1970 start_enigma
-rwxr-xr-x 1 root root 110 Jan 1 1970 start_main
-rwxr-xr-x 1 root root 163 Jan 1 1970 start_neutrino
drwxrwxrwx 2 root root 0 Jan 1 1970 ucodes

Analyzing the start_neutrino...

~/tuxbox > cat start_neutrino
#!/bin/sh

/sbin/ifconfig eth0 192.168.0.42

/bin/lcdd
/bin/timerd
/bin/sectionsd
/bin/zapit
/bin/controld
/bin/nhttpd
/bin/neutrino -flash -su

/sbin/halt
exit 0


The start_neutrino is different from start_main so I tryed to start manually the script from maintenance MODE and happen this:

~/tuxbox > /bin/lcdd
Network LCD-Driver $Id: lcdd.cpp,v 1.48 2002/05/15 23:32:12 McClean Exp $

[lcdd] load config
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)

EVERYTHING LOOKS OK !!! AFTER...

~/tuxbox > /bin/timerd

EVERYTHING LOOKS OK !!! AFTER...

~/tuxbox > /bin/sectionsd
$Id: sectionsd.cpp,v 1.126 2002/05/15 10:00:55 dirch Exp $
caching 504 hours
events are old 60min after their end time
~/tuxbox > [sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: DMX_STOP: Bad file descriptor
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory


THE ONLY SOLUTION TO STOP THIS IS... ...kill -9 "PID of sectionsd"
!!!!!!!!!!!!!!!!!!!!!!!!! This is not OK !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

CONTINUING...

~/tuxbox > /bin/zapit
$Id: zapit.cpp,v 1.171 2002/05/04 15:25:25 McClean Exp $

/var/tuxbox/config/zapit/zapit.conf: No such file or directory
/dev/ost/frontend0: No such file or directory
[zapit] unable to open frontend devices. bye.
Segmentation fault

!!!!!!!!!!!!!!!!!!!!!!!!! This is not OK !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

CONTINUING...

~/tuxbox > /bin/controld
Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $

[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (01, 1, 1, Nokia)


EVERYTHING LOOKS OK !!! AFTER...

~/tuxbox > /bin/nhttpd
[nhttpd] Neutrino HTTP-Server starting..
zapitclient: connect: No such file or directory
zapitclient: connect: No such file or directory

THIS IS NORMAL BECAUSE ZAPIT IS FAULT...
...CONTINUING...

~/tuxbox > /bin/neutrino -flash -su
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.275 2002/05/17 13:06:50 woglinde Exp $

[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
[neutrino] Error while setting framebuffer mode


!!!!!!!!!!!!!!!!!!!!!!!!! This is not OK !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

in /dev there is :

drwxr-xr-x 1 root root 0 Jan 1 1970 fb
lr-xr-xr-x 1 root root 4 Dec 31 15:10 fb0 -> fb/0

the SymLink fb0 to fb/0 is FAKE beacause /dev/fb is empty

/dev/fb > ll
drwxr-xr-x 1 root root 0 Jan 1 1970 .
drwxr-xr-x 1 root root 0 Jan 1 1970 ..
/dev/fb >


I don't Known where is my problem... ...Can someone help me ???!!!

TNX to Everything and a special TNX to THOMAS, DENNIS AND LION... ...Remember me in february ( http://tuxbox.berlios.de/forum/viewtopi ... highlight= ) ??????????

[ktw2001]

Please flash again.

Use AlexW BaseImage 1.5 (http://dboxupdate.berlios.de/),
set IP,
copy cramfs (ftp).

It es the same problem? Use Image 1.4.

[tbf2000]

The first procedure : already A LOT OF TIMES !!!

It's impossible to find the alexbaseimage1.4... ...Where I can download it ?

I don't think this is the right solution...

[Router-Fan]

Google : > cobra2000

[tbf2000]

only 2.4 Mb !!!

[Router-Fan]

and cramfs !

[tbf2000]

On LCD Neutrino and on TV black screen... ...No network... ...nothing !

(After FLASH and CRAMFS + UCODES but also after FLASH and CRAMFS without UCODES).

[Router-Fan]

http://dboxupdate.berlios.de/mcclean/

That is a very stable version ! Last Chance

[tbf2000]

I'have already tryed baseImage, but after the firts restart it reboot in loop continuos... ...I don't have the possibility to put cramsfs... ...But what do you think about my first POST ?

TNX !

[Router-Fan]

perhaps wrong flash version ? 2 flashs or 1 flash ?

sorry I don et know but I have orderd help

[tbf2000]

The Flash version is ok... ...I can't make this error !!!

(NOKIA 2 INTEL FLASH)

I think the problem is in framebuffer but I don't known What I need to do...

[Homar]

Hi tbf2000,

may i try to help you.

At first, you have to post an ordinary bootlog. It es not possible to see an error, if you make a partitial log.

Try to log at beginning of the boot procedure, please !!!

have fun
Homar

[tbf2000]

I can't log because my serial device is dead.