problem bei image flashen

Wie blitze ich ein Bild - Permanent Outgoing Incomes
rollingstone83
Beiträge: 1
Registriert: Mittwoch 19. Juni 2002, 12:49

problem bei image flashen

Beitrag von rollingstone83 »

hallo
habe meine box in debug mode gebracht,org soft ausgelesen,
dateien extrahiert. (sagem 1x intel)
wollte alex w basis image flashen - es funktioniert bis zu dem punkt,
wo der bootmanager schreibschutz aufheben, erasen und flash
beschreiben soll .
hier steht die geschichte

log auszug

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-d3.b2.8a.07.00.00-d4
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.10
debug: Sending TFTP-request for file G/Windows Programme/D-BoxBootManager/ppcboo
t_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-30-e1-11
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.10
Filename 'G/Windows Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.10
Filename 'G/Windows Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/dbox/alexW1xBaseimageV1.4.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.10
Filename '/C/dbox/alexW1xBaseimageV1.4.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################
done

dbox2-ppcboot>

hier geht nichts mehr weiter

wer kann mir bitte helfen?

danke rollingstone
tobby
Interessierter
Interessierter
Beiträge: 20
Registriert: Freitag 3. Mai 2002, 19:47

Beitrag von tobby »

einfach immer wieder probieren, irgendwann klappts schon, war bei mir auch so

tobby
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Schau mal ob evtl. das Nullmodem locker ist.
Wenn es gar nicht will, flash einfach mit der Methode: http://www.neutrino-anleitung.de/seite6.htm