Problem mit Yadd vom 28.07.02

[tek2000]

Hallo Leute,

ich hatte bereits früher einmal erfolgreich ein älteres Yadd getestet.
Unter Dietmars Aufsicht ist es schließlich zum Laufen gekommen.
Ich dachte, nun hätte ich allte nötigen Einstellungen, aber denkste.
Das Yadd vom 28.07.02 fährt zunächst normal hoch hält dann aber an und schaltet mir die Box aus.
Ich habe eine dbox 2 von nokia und benute den bootmanager von feldtech, alles wie gehabt.
Vielleicht seit Ihr nochmal so nett. Thanks.

Hier die Meldungen:debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-59.91.45.07.00.00-e4
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
debug: &_end 0x34894, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file C/Yadd2807/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 204200
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Jun 24 2002 - 20:39:15)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-18-7a
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'C/Yadd2807/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1FD2814 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'C/Yadd2807/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ##############
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'C/Yadd2807/tftpboot/kernel-yadd'.
Load address: 0x100000
Loading: #######################################################################
########################################
done
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 565357 Bytes = 552 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19-rc2-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht,
wird bestraft ;-) #1 Son Jul 28 12:10:12 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.0.1
:C/Yadd2807/yaddroot/
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30896k available (1072k kernel code, 332k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:41:18:7a
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 3 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.202
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.202, domain=, nis-domain=(none),
bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.61.pre (2002.05.26-17:53+0000) multi-ca[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19-rc2-dbox2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19-rc2-dbox2/misc/cam.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_flush_pcr
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol cam_read_message
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol cam_reset
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_gt_pcm_set_mpeg
_attenuation
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol cam_write_message
/lib/modules/2.4.19-rc2-dbox2/misc/dvb.o: unresolved symbol avia_gt_pcm_set_pcm_
attenuation
Init VES1893
/lib/modules/2.4.19-rc2-dbox2/misc/ves1893.o: unresolved symbol register_fronten
d
/lib/modules/2.4.19-rc2-dbox2/misc/ves1893.o: unresolved symbol unregister_front
end
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_set_queue
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_set_queue_irq
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol unregister_
demux
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_set_pcr_pid
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_set_queue_write_pointer
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_all
oc_irq
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol register_de
mux
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_force_discontinuity
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol gtx_set_que
ue_pointer
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_get
_info
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx
_get_queue_write_pointer
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_napi.o: unresolved symbol avia_gt_fre
e_irq
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_vbi.o: unresolved symbol avia_gt_get_
info
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_sh
ow
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_ge
t_clut
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_input_size
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_pos
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_hi
de
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_get_i
nfo
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_size
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_input_mode
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_clut
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_se
t_blevel
/lib/modules/2.4.19-rc2-dbox2/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_ge
t_info
CXA2092 found
CXA2092 found
Network LCD-Driver $Id: lcdd.cpp,v 1.51 2002/07/10 16:29:08 LazyT Exp $

[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.126 2002/05/15 10:00:55 dirch Exp $
caching 504 hours
events are old 60min after their end time
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[camd] /dev/dvb/card0/ca0: No such file or directory
[sectionsd] DMX: DMX_STOP: Bad file descriptor
$Id: zapit.cpp,v 1.193 2002/07/22 01:57:19 Homar Exp $

[getservices.cpp] /var/tuxbox/config/zapit/services.xml: No such file or directo
ry
[zapit] error parsing services!
/dev/ost/frontend0: No such file or directory
[zapit] unable to open frontend devices. bye.
Segmentation fault
Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $

[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[nhttpd] Neutrino HTTP-Server starting..
zapitclient: connect: No such file or directory
zapitclient: connect: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.307 2002/07/22 21:08:07 wjoost Exp $


[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode

The system is going down NOW !!
Sending SIGKILL to all processes.httpd] stop requested......
CXA2092 found
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt

[tek2000]

Hat sich wohl erledigt.
Ich Depp hatte die ucodes vergessen.
Sorry und Gruß

Tek

[Massa]

Linux version 2.4.19-rc2-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht,
wird bestraft ;-) #1 Son Jul 28 12:10:12 CEST 2002
On node 0 totalpages: 8192

Das war aber nicht homar's yadd, oder?
Der arbeitet mit dem Original CVS und da ist IMHO noch kernel 2.4.2 drin.

War das das yadd von AlexW?