Was fehlt denn noch ???

[roman]

Hallo komme im Augenblick nicht weiter - Sackgasse

Debug - ohne Probleme (Sagem 2*I)
rücksicherung der Daten i.O.
Flashen ????? (Alexw 1.6 / 1.62
habe vermutlich nur eine falsche pccboot vieleicht weis ja einer das Problem - danke im voraus für die bemühungen.

debug: fpID 52 dsID 01-f0.d8.0d.07.00.00-c8
debug: HWrev 01 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.2, My IP 192.168.0.50
debug: Sending TFTP-request for file C/dbox2/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 200228
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Aug 30 2002 - 00:40:08)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-xx-xx-xx-xx-xx
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.50
Filename 'C/dbox2/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1FD2AD8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.50
Filename 'C/dbox2/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
done
FB logo at: 0x0 (0x1FD2AD8 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.50
Filename 'C/dbox2/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
########################################################
done
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647325 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (Sinnlos98@ATHLON) (gcc version 3.2) #9 Fri Aug 30 00:40:23
2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.2:C/dbox2/
yadd/cdkroot/ ip=192.168.0.50:192.168.0.2:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 66 busfreq = 66
WARNING: NEW intfreq = 66000000 busfreq = 66000000
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30788k available (1136k kernel code, 376k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:xx:xx:xx:xx:xx
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.50, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.50, domain=, nis-domain=(none),
bootserver=192.168.0.2, rootserver=192.168.0.2, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.2
Looking up port of RPC 100005/1 on 192.168.0.2
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.3 (2002.08.29-22:41+0000) multi-callNote: /etc/modu
les.conf is more recent than /lib/modules/2.4.19/modules.dep
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 03
feID: 00
fpID: 52
enxID: 03
gtxID: ffffffff
hwREV: 21
fpREV: 23
DEMOD: VES1993
Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz
gunzip: fe=1: No such file or directory
maybekillzombie(): decompressor child exited anormally with code 1.
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 1).
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
mice: PS/2 mouse device common for all mice
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia.o: insmod /lib/modules/2.4.19/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia.o: insmod dvb failed
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia.o: insmod /lib/modules/2.4.19/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia.o: insmod tuner failed
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia.o: insmod /lib/modules/2.4.19/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia.o: insmod avia_gt failed
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia.o: insmod /lib/modules/2.4.19/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia.o: insmod avia_gt_fb failed
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia.o: insmod /lib/modules/2.4.19/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia.o: insmod avia_gt_oss failed
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia.o: insmod /lib/modules/2.4.19/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia.o: insmod avia_gt_napi failed
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia.o: insmod /lib/modules/2.4.19/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia.o: insmod avia_gt_vbi failed
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia.o: insmod /lib/modules/2.4.19/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia.o: insmod dvb_net failed
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 3

Please press Enter to activate this console. /dev/dbox/rc0: No such file or dire
ctory

The system is going down NOW !!
Sending SIGKILL to all processes.
CXA2126 found
The system is halted. Press CTRL-ALT-DEL or turn off power
System halted.
Oops: kernel access of bad area, sig: 11
NIP: 00000000 XER: 00000000 LR: C0009DD0 SP: C1FEFDF0 REGS: c1fefd40 TRAP: 0400
Not tainted
MSR: 08209032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1fee000[1] 'init' Last syscall: 88
last math 00000000 last altivec 00000000
GPR00: C001B6F8 C1FEFDF0 C1FEE000 00000012 00001032 00000001 FF000000 C01432B7
GPR08: 00000000 00000000 FF002830 C1FEFD10 0000000D 10068FBC 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01FEFF10 00000000 C0004594
GPR24: C0004300 10060FF0 1003B2A0 10060000 00000001 10020000 7FFFFE6C 0000000A
Call backtrace:
10020000 C001B6F8 C000435C 00000000 10020874 7FFFFD58 00000000
100216F0 1003B878 1003B334 0FED9960 00000000
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds..

[Dietmar]

Öh, Du willst nen Image flashen?
Hast Du auf den Image flashen Button des Bootmanagers gedrückt?
:

[roman]

Öh - eigentlich ja
Button Image flashen - in den Anleitungen wird beschrieben eine ppcboot
aus eine Yadd zu nehmen - hab ich auch von anderen Seiten gabs was auszuprobieren doch flashen ging eigentlich keines - schätze das sind die falsche ppcboot gewesen

[Dietmar]

Hast Du den aktuellen bootmanager?
Wenn Nein -> Holen.
Der stellt alles von selber ein.