Das Log-File sende ich noch mit.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2a:dc:00
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.05.26-17:53+0000) multi-ca[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
write 1 event's ...
write 1 event's ...
CAM: attached to adapter
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
avia_gt_core: $Id: avia_gt_core.c,v 1.20 2002/06/07 14:00:23 tmbinc Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.11 2002/06/07 17:53:45 Jolt Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.91 2002/07/08 15:12:47 wjoost Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: RISC mem map size: 2048
ENX-INITed -> 0
there MIGHT be no TS
avia_gt_gv: $Id: avia_gt_gv.c,v 1.21 2002/07/21 15:16:22 waldi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.14 2002/06/07 18:06:03 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.20 2002/06/07 18:06:03 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.26 2002/06/07 18:06:03 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.18 2002/06/07 18:06:03 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Init TDA8044H
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.o: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
sync: 01
sync: 01
sync: 01
avia_gt_napi: $Id: avia_gt_napi.c,v 1.88 2002/05/07 16:59:19 Jolt Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
sync: 00
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.15 2002/07/02 09:31:22 LazyT Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.33 2002/07/19 22:59:21 waldi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
sync: 00
sync: 01
sync: 01
sync: 00
sync: 00
Network LCD-Driver $Id: lcdd.cpp,v 1.51 2002/07/10 16:29:08 LazyT Exp $
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
sync: 00
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
sync: 01
sync: 01
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
$Id: sectionsd.cpp,v 1.126 2002/05/15 10:00:55 dirch Exp $
caching 504 hours
events are old 60min after their end time
[camd] no card is in slot #2
[camd] a card is in slot #1
[sdt.c] read: Connection timed out
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1702
sync: 01
sync: 01
sync: 00
$Id: zapit.cpp,v 1.193 2002/07/22 01:57:19 Homar Exp $
sync: 00
sync: 01
sync: 01
sync: 00
sync: 00
sync: 00
[getservices.cpp] going to parse satellite Astra 19.2E
sync: 01
sync: 00
sync: 01
sync: 00
[zapit] reading Bouquets ............................
[zapit] Found 29 bouquets.
sync: 01
sync: 00
sync: 01
sync: 00
sync: 00
[zapit] channels have been loaded succesfully
Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $
sync: 01
sync: 00
[controld] Boxtype detected: (02, 2, 3, Philips)
set event: 00000009
[controld] Unknown apsectRatio: 0[controld] setting VideoFormat to auto
sync: 01
sync: 00
sync: 01
sync: 00
[nhttpd] Neutrino HTTP-Server starting..
sync: 00
sync: 00
sync: 01
sync: 00
sync: 01
sync: 01
sync: 00
sync: 00
sync: 00
sync: 01
sync: 00
sync: 00
sync: 00
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.307 2002/07/22 21:08:07 wjoost Exp $
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
sync: 01
sync: 00
sync: 00
sync: 00
sync: 01
sync: 00
IP : 192.168.123.214
Netmask : 255.255.255.0
Broadcast: 192.168.123.255
Gateway : 192.168.123.254
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
[controld] setting VideoFormat to auto
video notify: videomenu.videoformat
sync: 00
sync: 00
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
sync: 01
sync: 00
sync: 01
sync: 00
setting freq 2092250
sync: 00
tuner locked
setting symbolrate: 22000000
fec: 04
01 00 8b a2 e9 23 00 08 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
[CFrosync: 00
ntend::gsync: 00
etEvent] timeout
[zapit] tune retry 0
setting freq 2092250
tuner locked
setting symbolrate: 22000000
fec: 04
01 00 8b a2 e9 23 00 08 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
[CFrontend::getEvent] timeout
[zapit] tune retry 1
setting freq 2092250
sync: 00
tuner locked
setting symbolrate: 22000000
fec: 04
01 00 8b a2 e9 23 00 08 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
sync: 00
[CFrontend::getEvent] timeout
[zapit] tune retry 2
setting freq 2092250
sync: 00
tuner locked
setting symbolrate: 22000000
fec: 04
01 00 8b a2 e9 23 00 08 30 42 98 28 30 42 99 50
17 68 9a
22 f9
0b 68 70
sync: 00
sync: 00
sync: 00
sync: 00
[CFrontend::getEvent] timeout
sync: 00
[zapit] tune retry 3
[CFrontend::getEvent] timeout
setting freq 2092250
[zapit] tune retry 4
sync: 00
write 1 event's ...
write event ... free found
write event ... filter ok
[controld]: loading scart-config (scart.conf)
[controld]: switch to scart-input... (Philips)
Ich hoffe Ihr könnt mir helfen.
