Schönen Abend mal,
hab grad versucht bei meiner box das cdk vom 07.Okt.02 einzuspielen ging so weit dann wollte ich wieder mein alltes einspielen das ich von meinem Umbauer auf cd mitbekommen hab funktioniert auch so weit aber nach dem neustart komm ich nur noch zu der auswahl von Neutrino, Enigma, usw wenn ich eines dieser auswähle bleibt alles schwarz sowohl das LCD als auch der Tv.
Kann mir wer eine lösung sagen wie ich das Problem beheben kann?
Hab voll die Panik das ich die Box vielleicht geschoßen hab oder so.
Bei Versuch altes cdk einzuspielen geht nichts mehr
-
hauzi018
- Neugieriger
- Beiträge: 14
- Registriert: Freitag 16. August 2002, 18:53
-
Zahni
- Tuxboxer
- Beiträge: 2227
- Registriert: Freitag 24. Mai 2002, 10:38
-
hauzi018
- Neugieriger
- Beiträge: 14
- Registriert: Freitag 16. August 2002, 18:53
-
Dietmar
- Senior Member
- Beiträge: 8282
- Registriert: Mittwoch 10. Oktober 2001, 00:00
-
hauzi018
- Neugieriger
- Beiträge: 14
- Registriert: Freitag 16. August 2002, 18:53
-
SoLaLa
- Tuxboxer
- Beiträge: 6119
- Registriert: Mittwoch 3. April 2002, 00:32
-
Dietmar
- Senior Member
- Beiträge: 8282
- Registriert: Mittwoch 10. Oktober 2001, 00:00
-
hauzi018
- Neugieriger
- Beiträge: 14
- Registriert: Freitag 16. August 2002, 18:53
-
Dietmar
- Senior Member
- Beiträge: 8282
- Registriert: Mittwoch 10. Oktober 2001, 00:00
-
hauzi018
- Neugieriger
- Beiträge: 14
- Registriert: Freitag 16. August 2002, 18:53
So bin jetzt auf meiner box und bin in dem Ordner wo die Ucodes sich befinden dort sind aber schon welche drin jetzt hab ich die von meiner cd nochmal hochgeladen aber es tut sich trotzdem nichts
hab hier mal das com log wenn ich neutrino starten will
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: unknown demodulatordebug: BMon V1.2 mID 01
debug: feID 00 gtxID 0b
debug: fpID 5a dsID 01-ec.e1.81.07.00.00-52
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044
will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 575141 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 575077 Bytes = 561 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Mit Aug 21 17:11:20 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 251625000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30948k available (1004k kernel code, 356k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:45:5a:b8
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.08.18-11:52+0000) multi-ca[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
write 1 event's ...
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
avia_gt_core: $Id: avia_gt_core.c,v 1.21 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.15 2002/08/22 13:39:33 Jolt Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.98 2002/08/27 21:53:09 Jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: RISC mem map size: 2048
avia_gt_gv: $Id: avia_gt_gv.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.17 2002/08/22 13:39:33 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Init VES1993
i2c-core.o: driver VES1993 DVB DECODER registered.
i2c-core.o: client [VES1993] registered to adapter [](pos. 4).
avia_gt_core: masking unhandled irq reg 0 bit 6
i2c-core.o: driver sp5659/tsa5059 tuner driver registered.
i2c-core.o: client [DBox2 Tuner Driver] registered to adapter [](pos. 5).
VES1993: tsa5059 tuner found
avia_gt_napi: $Id: avia_gt_napi.c,v 1.93 2002/08/25 09:38:26 wjoost Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_napi: hardware section filtering disabled.
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.8 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
/etc/init.d/rcS: /var/tuxbox/start_neutrino: No such file or directory
Please press Enter to activate thOops: kernel access of bad area, sig: 11
NIP: C0029684 XER: 20000000 LR: C0028ED0 SP: C1DE1CC0 REGS: c1de1c10 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00020018, DSISR: 00000163
TASK = c1de0000[67] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: C016E020 C1DE1CC0 C1DE0000 00020000 C3A94000 00000000 C3B9A950 C015FF08
GPR08: 00000010 000A1170 C016E020 C0130000 C015BBB0 100582F4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01DE1F40 00000000 C0004594
GPR24: C0004300 C014D6DC C3B9A724 00000001 00000000 00000200 00000100 C3A94000
Call backtrace:
00000C20 C009D9BC C3B99D18 C00A18CC C008A364 C008A690 C0082194
C0089A5C C0085C34 C0089910 C0078180 C005F2D8 C0031BD0 C0031ACC
C0031E74 C000435C 00000000 1001395C 10013DD4 10014904 1000345C
1000306C 0FF3F610 00000000
is console. Oops: kernel access of bad area, sig: 11
NIP: C0029684 XER: 20000000 LR: C0028ED0 SP: C1DD1CC0 REGS: c1dd1c10 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00020018, DSISR: 00000163
TASK = c1dd0000[68] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: C016E020 C1DD1CC0 C1DD0000 00020000 C3A94000 00000000 C3B9A950 C015FF08
GPR08: 00000010 000A1170 C016E020 C0130000 C015BCC4 100582F4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01DD1F40 00000000 C0004594
GPR24: C0004300 C014D6DC C3B9A724 00000002 00000000 00000200 00000100 C3A94000
Call backtrace:
00000000 C009D9CC C3B99D18 C00A18CC C008A364 C008A690 C0082194
C0089A5C C0085C34 C0089910 C0078180 C005F2D8 C0031BD0 C0031ACC
C0031E74 C000435C 00000000 1001395C 10013DD4 10014904 1000345C
1000306C 0FF3F610 00000000
Oops: kernel access of bad area, sig: 11
NIP: C0029684 XER: 20000000 LR: C0028ED0 SP: C1CFBCC0 REGS: c1cfbc10 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000017, DSISR: 00000163
TASK = c1cfa000[70] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: C016E020 C1CFBCC0 C1CFA000 FFFFFFFF 000002D0 00000000 C3B9A950 C015FF08
GPR08: 00000010 00B00000 C016E020 C0130000 C015BEEC 100582F4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01CFBF40 00000000 C0004594
GPR24: C0004300 C014D6DC C3B9A724 00000004 00000000 00000200 00000100 000002D0
Call backtrace:
00000000 C009D9C4 C3B99D18 C00A18CC C008A364 C008A690 C0082194
C0089A5C C0085C34 C0089910 C0078180 C005F2D8 C0031BD0 C0031ACC
C0031E74 C000435C 00000000 1001395C 10013DD4 10014904 1000345C
1000306C 0FF3F610 00000000
Oops: kernel access of bad area, sig: 11
NIP: C000CFE0 XER: 20000000 LR: C009DA74 SP: C1BB9CD0 REGS: c1bb9c20 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 47687EC8, DSISR: 00004004
TASK = c1bb8000[69] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00000003 C1BB9CD0 C1BB8000 00000000 47687EC4 00000006 FFFFFFFC 00000000
GPR08: 00000010 3C56C010 C3A94000 00000000 C015BDD8 100582F4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01BB9F40 00000000 C0004594
GPR24: C0004300 C014D6DC C3B9A724 87528000 00000000 C015BE90 C011DB04 00000006
Call backtrace:
C002B750 C3B99CD0 C00A18CC C008A364 C008A690 C0082194 C0089A5C
C0085C34 C0089910 C0078180 C005F2D8 C0031BD0 C0031ACC C0031E74
C000435C 00000000 1001395C 10013DD4 10014904 1000345C 1000306C
0FF3F610 00000000
Oops: kernel access of bad area, sig: 11
NIP: C000CFC8 XER: 20000000 LR: C009DA74 SP: C1DD9CD0 REGS: c1dd9c20 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00010000, DSISR: 000008E6
TASK = c1dd8000[72] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00000000 C1DD9CD0 C1DD8000 00010000 C015FECC 00000020 0000FFFC 00000000
GPR08: 00000000 00000010 00000000 00000000 C015C000 100582F4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01DD9F40 00000000 C0004594
GPR24: C0004300 C014D6DC C3B9A724 00000000 00000000 C015C0C8 C011DB04 00000020
Call backtrace:
C002B750 C3B99CD0 C00A18CC C008A364 C008A690 C0082194 C0089A5C
C0085C34 C0089910 C0078180 C005F2D8 C0031BD0 C0031ACC C0031E74
C000435C 00000000 1001395C 10013DD4 10014904 1000345C 1000306C
0FF3F610 00000000
hab hier mal das com log wenn ich neutrino starten will
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: unknown demodulatordebug: BMon V1.2 mID 01
debug: feID 00 gtxID 0b
debug: fpID 5a dsID 01-ec.e1.81.07.00.00-52
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044
will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 575141 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 575077 Bytes = 561 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Mit Aug 21 17:11:20 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 251625000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30948k available (1004k kernel code, 356k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:45:5a:b8
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.08.18-11:52+0000) multi-ca[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
write 1 event's ...
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
avia_gt_core: $Id: avia_gt_core.c,v 1.21 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.15 2002/08/22 13:39:33 Jolt Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.98 2002/08/27 21:53:09 Jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: RISC mem map size: 2048
avia_gt_gv: $Id: avia_gt_gv.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.17 2002/08/22 13:39:33 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Init VES1993
i2c-core.o: driver VES1993 DVB DECODER registered.
i2c-core.o: client [VES1993] registered to adapter [](pos. 4).
avia_gt_core: masking unhandled irq reg 0 bit 6
i2c-core.o: driver sp5659/tsa5059 tuner driver registered.
i2c-core.o: client [DBox2 Tuner Driver] registered to adapter [](pos. 5).
VES1993: tsa5059 tuner found
avia_gt_napi: $Id: avia_gt_napi.c,v 1.93 2002/08/25 09:38:26 wjoost Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_napi: hardware section filtering disabled.
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.8 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
/etc/init.d/rcS: /var/tuxbox/start_neutrino: No such file or directory
Please press Enter to activate thOops: kernel access of bad area, sig: 11
NIP: C0029684 XER: 20000000 LR: C0028ED0 SP: C1DE1CC0 REGS: c1de1c10 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00020018, DSISR: 00000163
TASK = c1de0000[67] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: C016E020 C1DE1CC0 C1DE0000 00020000 C3A94000 00000000 C3B9A950 C015FF08
GPR08: 00000010 000A1170 C016E020 C0130000 C015BBB0 100582F4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01DE1F40 00000000 C0004594
GPR24: C0004300 C014D6DC C3B9A724 00000001 00000000 00000200 00000100 C3A94000
Call backtrace:
00000C20 C009D9BC C3B99D18 C00A18CC C008A364 C008A690 C0082194
C0089A5C C0085C34 C0089910 C0078180 C005F2D8 C0031BD0 C0031ACC
C0031E74 C000435C 00000000 1001395C 10013DD4 10014904 1000345C
1000306C 0FF3F610 00000000
is console. Oops: kernel access of bad area, sig: 11
NIP: C0029684 XER: 20000000 LR: C0028ED0 SP: C1DD1CC0 REGS: c1dd1c10 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00020018, DSISR: 00000163
TASK = c1dd0000[68] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: C016E020 C1DD1CC0 C1DD0000 00020000 C3A94000 00000000 C3B9A950 C015FF08
GPR08: 00000010 000A1170 C016E020 C0130000 C015BCC4 100582F4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01DD1F40 00000000 C0004594
GPR24: C0004300 C014D6DC C3B9A724 00000002 00000000 00000200 00000100 C3A94000
Call backtrace:
00000000 C009D9CC C3B99D18 C00A18CC C008A364 C008A690 C0082194
C0089A5C C0085C34 C0089910 C0078180 C005F2D8 C0031BD0 C0031ACC
C0031E74 C000435C 00000000 1001395C 10013DD4 10014904 1000345C
1000306C 0FF3F610 00000000
Oops: kernel access of bad area, sig: 11
NIP: C0029684 XER: 20000000 LR: C0028ED0 SP: C1CFBCC0 REGS: c1cfbc10 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000017, DSISR: 00000163
TASK = c1cfa000[70] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: C016E020 C1CFBCC0 C1CFA000 FFFFFFFF 000002D0 00000000 C3B9A950 C015FF08
GPR08: 00000010 00B00000 C016E020 C0130000 C015BEEC 100582F4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01CFBF40 00000000 C0004594
GPR24: C0004300 C014D6DC C3B9A724 00000004 00000000 00000200 00000100 000002D0
Call backtrace:
00000000 C009D9C4 C3B99D18 C00A18CC C008A364 C008A690 C0082194
C0089A5C C0085C34 C0089910 C0078180 C005F2D8 C0031BD0 C0031ACC
C0031E74 C000435C 00000000 1001395C 10013DD4 10014904 1000345C
1000306C 0FF3F610 00000000
Oops: kernel access of bad area, sig: 11
NIP: C000CFE0 XER: 20000000 LR: C009DA74 SP: C1BB9CD0 REGS: c1bb9c20 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 47687EC8, DSISR: 00004004
TASK = c1bb8000[69] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00000003 C1BB9CD0 C1BB8000 00000000 47687EC4 00000006 FFFFFFFC 00000000
GPR08: 00000010 3C56C010 C3A94000 00000000 C015BDD8 100582F4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01BB9F40 00000000 C0004594
GPR24: C0004300 C014D6DC C3B9A724 87528000 00000000 C015BE90 C011DB04 00000006
Call backtrace:
C002B750 C3B99CD0 C00A18CC C008A364 C008A690 C0082194 C0089A5C
C0085C34 C0089910 C0078180 C005F2D8 C0031BD0 C0031ACC C0031E74
C000435C 00000000 1001395C 10013DD4 10014904 1000345C 1000306C
0FF3F610 00000000
Oops: kernel access of bad area, sig: 11
NIP: C000CFC8 XER: 20000000 LR: C009DA74 SP: C1DD9CD0 REGS: c1dd9c20 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00010000, DSISR: 000008E6
TASK = c1dd8000[72] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00000000 C1DD9CD0 C1DD8000 00010000 C015FECC 00000020 0000FFFC 00000000
GPR08: 00000000 00000010 00000000 00000000 C015C000 100582F4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01DD9F40 00000000 C0004594
GPR24: C0004300 C014D6DC C3B9A724 00000000 00000000 C015C0C8 C011DB04 00000020
Call backtrace:
C002B750 C3B99CD0 C00A18CC C008A364 C008A690 C0082194 C0089A5C
C0085C34 C0089910 C0078180 C005F2D8 C0031BD0 C0031ACC C0031E74
C000435C 00000000 1001395C 10013DD4 10014904 1000345C 1000306C
0FF3F610 00000000
-
alexW
- Developer
- Beiträge: 631
- Registriert: Donnerstag 24. Januar 2002, 12:21
-
hauzi018
- Neugieriger
- Beiträge: 14
- Registriert: Freitag 16. August 2002, 18:53
-
Dietmar
- Senior Member
- Beiträge: 8282
- Registriert: Mittwoch 10. Oktober 2001, 00:00
-
BOFH
- Erleuchteter
- Beiträge: 498
- Registriert: Sonntag 10. März 2002, 17:00
@Dietmar
Für mein Verständniss mal so dazwischen gefragt: Wenn ich aus den aktuelleren Versionen ein 'kompl. Image ohne BL' ziehe, habe ich doch das Baseimage dabei, oder?
Und wenn ich das dann z.B. per Bootmanager aufspiele habe ich wieder den alten Zustand?
@Haunzi
Die Fehler gehören dazu . Das machts doch gerade spannend.
Ich hab immer ein Verzeichnis mit einer laufenden Version für den Notfall bereitliegen.
Standart-Anleitung: http://dboxupdate.berlios.de/install.shtml
Für mein Verständniss mal so dazwischen gefragt: Wenn ich aus den aktuelleren Versionen ein 'kompl. Image ohne BL' ziehe, habe ich doch das Baseimage dabei, oder?
Und wenn ich das dann z.B. per Bootmanager aufspiele habe ich wieder den alten Zustand?
@Haunzi
Die Fehler gehören dazu . Das machts doch gerade spannend.
Ich hab immer ein Verzeichnis mit einer laufenden Version für den Notfall bereitliegen.Standart-Anleitung: http://dboxupdate.berlios.de/install.shtml
(Nokia SAT; 2xI; Avia600)
-
Dietmar
- Senior Member
- Beiträge: 8282
- Registriert: Mittwoch 10. Oktober 2001, 00:00