Ich habe von Kumpel getötete d-box2 bekommen !!
Was der mit ihr getrieben hat >> keine Ahnung!
Auf dem Display ist nix zu sehen (nur hinterleuchtet)!
Ich habe die dbox mit Boot-Manager und minflsh in den Debug-Mode versetzt!
Image aufgespielt!
D-Box gestartet >> auf dem Display immer noch nichts, aber
auf TV Startbildschirm von Tux.... danach nur schwarzer Bildschirm!
Ucodes konnte ich nicht einspielen weil das mit dem FTP-Prog nicht
klappt! D-Box-IP:192.168.0.35 Netzwerkkarten-IP:192.168.0.15
D-Box läßt sich anpingen!
Liegt mein Problem an den fehlenden Ucodes in der Box???
Bekomme ich die Ucodes auch anders rein?
Der Boot-Manager sagt auch --Konnte keine FTP-Verbindung her-
stellen--!
Habe ein funktionierendes Netzwerk aber auch da funktioniert das mit
dem FTP-Prog nicht!! Habe schon mehrere davon ausprobiert!
Kann mir jemand helfen? danke
Nix geht mehr -- Ich dreh noch durch !!!!!!!!
-
luztz
- Neugieriger
- Beiträge: 11
- Registriert: Sonntag 13. Oktober 2002, 20:46
-
DieMade
- Oberlamer, Administrator & Supernanny
- Beiträge: 10532
- Registriert: Samstag 13. Juli 2002, 10:49
Kommst Du mit der d-box Taste noch ins Menü?
Wenn ja, ganzes Flashimage auslesen, mit den NewTuxboxFlashTools die uCodes reinfummeln und wieder auf die Box flashen.
Hab ich selber noch nie gamacht, sollte aber gehen.
Wenn ja, ganzes Flashimage auslesen, mit den NewTuxboxFlashTools die uCodes reinfummeln und wieder auf die Box flashen.
Hab ich selber noch nie gamacht, sollte aber gehen.
There are 10 types of people in the world: those who know binary and those who don't
-
luztz
- Neugieriger
- Beiträge: 11
- Registriert: Sonntag 13. Oktober 2002, 20:46
-
rollorcs
- Einsteiger
- Beiträge: 357
- Registriert: Mittwoch 29. August 2001, 00:00
-
luztz
- Neugieriger
- Beiträge: 11
- Registriert: Sonntag 13. Oktober 2002, 20:46
bittesehr
Ich hoffe, das ist das was Du brauchst !?
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0208
will verify ELF image, start= 0x800000, size= 208073
verify sig: 262
Branching to 0x40000
ppcboot 0.6.4 (Jul 10 2001 - 11:31:30)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-43-45-a7
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x80832 (0x1C20 bytes)
FB driver (AVIA-GTX) initialized
FB logo at: 0x8247A (0xDDD2 bytes)
Input: serial
Output: serial
1: Console on fb
2: Console on ttyS0
Select (1-4), other keys to stop autoboot: 0
unprotecting 4
[10001]-> [0] [S800080] unprotecting 5
[10001]-> [0] [S800080] unprotecting 6
[10001]-> [0] [S800080] unprotecting 7
[10001]-> [0] [S800080] unprotecting 8
[10001]-> [0] [S800080] unprotecting 9
[10001]-> [0] [S800080] unprotecting a
[10001]-> [0] [S800080] unprotecting b
[10001]-> [0] [S800080] unprotecting c
[10001]-> [0] [S800080] unprotecting d
[10001]-> [0] [S800080] unprotecting e
[10001]-> [0] [S800080] unprotecting f
[10001]-> [0] [S800080] unprotecting 10
[10001]-> [0] [S800080] unprotecting 11
[10001]-> [0] [S800080] unprotecting 12
[10001]-> [0] [S800080] unprotecting 13
[10001]-> [0] [S800080] unprotecting 14
[10001]-> [0] [S800080] unprotecting 15
[10001]-> [0] [S800080] unprotecting 16
[10001]-> [0] [S800080] unprotecting 17
[10001]-> [0] [S800080] unprotecting 18
[10001]-> [0] [S800080] unprotecting 19
[10001]-> [0] [S800080] unprotecting 1a
[10001]-> [0] [S800080] unprotecting 1b
[10001]-> [0] [S800080] unprotecting 1c
[10001]-> [0] [S800080] unprotecting 1d
[10001]-> [0] [S800080] unprotecting 1e
[10001]-> [0] [S800080] unprotecting 1f
[10001]-> [0] [S800080] unprotecting 20
[10001]-> [0] [S800080] unprotecting 21
[10001]-> [0] [S800080] unprotecting 22
[10001]-> [0] [S800080] unprotecting 23
[10001]-> [0] [S800080] unprotecting 24
[10001]-> [0] [S800080] unprotecting 25
[10001]-> [0] [S800080] unprotecting 26
[10001]-> [0] [S800080] unprotecting 27
[10001]-> [0] [S800080] unprotecting 28
[10001]-> [0] [S800080] unprotecting 29
[10001]-> [0] [S800080] unprotecting 2a
[10001]-> [0] [S800080] unprotecting 2b
[10001]-> [0] [S800080] unprotecting 2c
[10001]-> [0] [S800080] unprotecting 2d
[10001]-> [0] [S800080] unprotecting 2e
[10001]-> [0] [S800080] unprotecting 2f
[10001]-> [0] [S800080] unprotecting 30
[10001]-> [0] [S800080] unprotecting 31
[10001]-> [0] [S800080] unprotecting 32
[10001]-> [0] [S800080] unprotecting 33
[10001]-> [0] [S800080] unprotecting 34
[10001]-> [0] [S800080] unprotecting 35
[10001]-> [0] [S800080] unprotecting 36
[10001]-> [0] [S800080] unprotecting 37
[10001]-> [0] [S800080] unprotecting 38
[10001]-> [0] [S800080] unprotecting 39
[10001]-> [0] [S800080] unprotecting 3a
[10001]-> [0] [S800080] unprotecting 3b
[10001]-> [0] [S800080] unprotecting 3c
[10001]-> [0] [S800080] unprotecting 3d
[10001]-> [0] [S800080] unprotecting 3e
[10001]-> [0] [S800080] unprotecting 3f
[10001]-> [0] [S800080] unprotecting 40
[10001]-> [0] [S800080] unprotecting 41
[10001]-> [0] [S800080] unprotecting 42
[10001]-> [0] [S800080] Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x807D6 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 526230 Bytes = 513 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #97 Mon Aug 27 17:52:09 CEST 2001
Boot arguments: console=ttyS0 ro root=/dev/mtdblock/3
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ro root=/dev/mtdblock/3
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30792k available (960k kernel code, 392k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20376kB/6792kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:43:45:a7
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var"
0x00160000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k int
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.08.26-20:11+0000) multi-c
all bircS starting
Mounting /proc device
Mounting /dev/pts
Mounting /var
Mounting /var/tmp on ramfs
Starting inetd
Setting hostname
Lade module
Lade lcd
lcd.o: LCD driver (KS0713) module
Lade i2c-8xx
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Starte aniplay
[1] 40
checke ucodes
/var/ucodes/avia500.ux: No such file or directory
/var/ucodes/avia600.ux: No such file or directory
/var/ucodes/ucode.bin: No such file or directory
/var/ucodes/cam-alpha.bin: No such file or directory
Lade memctl.o workaroud , hope it works
clr(): Device or resource busy
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
avia_core.c: do_firmread: Unable to load '/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade gtx_core
gtx-core.c: init_gtx: gtxID 0b
gtx-core.c: init_gtx: loaded AViA GTX core driver
Lade demux
Lade cam
/lib/modules/2.4.2/misc/cam.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade dmxdev
Lade dvbdev
Lade dvb
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_flush_pcr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_read_message
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_reset
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_write_message
Lade ves1893
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol register_demod
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol unregister_demod
Lade gtx_dmx
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol unregister_demux
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol register_demux
Lade gtx_fb
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
CXA2092 found
CXA2092 found
CXA2092 found
CXA2092 found
CXA2092 found
[1] Done /bin/aniplay /usr/ani/dbox-neu.ani &
Setting up loopback device
starting ftpd
FTP4ALL 3.012, Copyright (C) 1996-2000 by Crescent (crescent@ftp4all.de)
This program is FREE SOFTWARE and distributed under GNU PUBLIC LICENSE
Server on host dbox is ready and listening on *:21
Base directory : /var/
Readme file : (none)
Permission file: .permissions
Errlog file : log/ftpd.err
Log file : log/ftpd.log
Log program : (none)
Server program : /sbin/ftps
###########################################
## ##
## V 27 , ezap + neutrino + lcars ##
## ##
## N O T F O R S A L E !! ##
## ##
###########################################
killall: aniplay: no process killed
[1] 104
Please press Enter to activate this console.
StartMenu dbox2 Linux Projekt
2001 by Andre Paul
clear failed: Device or resource busy
graphic mode failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel
usw...
danke
Ich hoffe, das ist das was Du brauchst !?
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0208
will verify ELF image, start= 0x800000, size= 208073
verify sig: 262
Branching to 0x40000
ppcboot 0.6.4 (Jul 10 2001 - 11:31:30)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-43-45-a7
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x80832 (0x1C20 bytes)
FB driver (AVIA-GTX) initialized
FB logo at: 0x8247A (0xDDD2 bytes)
Input: serial
Output: serial
1: Console on fb
2: Console on ttyS0
Select (1-4), other keys to stop autoboot: 0
unprotecting 4
[10001]-> [0] [S800080] unprotecting 5
[10001]-> [0] [S800080] unprotecting 6
[10001]-> [0] [S800080] unprotecting 7
[10001]-> [0] [S800080] unprotecting 8
[10001]-> [0] [S800080] unprotecting 9
[10001]-> [0] [S800080] unprotecting a
[10001]-> [0] [S800080] unprotecting b
[10001]-> [0] [S800080] unprotecting c
[10001]-> [0] [S800080] unprotecting d
[10001]-> [0] [S800080] unprotecting e
[10001]-> [0] [S800080] unprotecting f
[10001]-> [0] [S800080] unprotecting 10
[10001]-> [0] [S800080] unprotecting 11
[10001]-> [0] [S800080] unprotecting 12
[10001]-> [0] [S800080] unprotecting 13
[10001]-> [0] [S800080] unprotecting 14
[10001]-> [0] [S800080] unprotecting 15
[10001]-> [0] [S800080] unprotecting 16
[10001]-> [0] [S800080] unprotecting 17
[10001]-> [0] [S800080] unprotecting 18
[10001]-> [0] [S800080] unprotecting 19
[10001]-> [0] [S800080] unprotecting 1a
[10001]-> [0] [S800080] unprotecting 1b
[10001]-> [0] [S800080] unprotecting 1c
[10001]-> [0] [S800080] unprotecting 1d
[10001]-> [0] [S800080] unprotecting 1e
[10001]-> [0] [S800080] unprotecting 1f
[10001]-> [0] [S800080] unprotecting 20
[10001]-> [0] [S800080] unprotecting 21
[10001]-> [0] [S800080] unprotecting 22
[10001]-> [0] [S800080] unprotecting 23
[10001]-> [0] [S800080] unprotecting 24
[10001]-> [0] [S800080] unprotecting 25
[10001]-> [0] [S800080] unprotecting 26
[10001]-> [0] [S800080] unprotecting 27
[10001]-> [0] [S800080] unprotecting 28
[10001]-> [0] [S800080] unprotecting 29
[10001]-> [0] [S800080] unprotecting 2a
[10001]-> [0] [S800080] unprotecting 2b
[10001]-> [0] [S800080] unprotecting 2c
[10001]-> [0] [S800080] unprotecting 2d
[10001]-> [0] [S800080] unprotecting 2e
[10001]-> [0] [S800080] unprotecting 2f
[10001]-> [0] [S800080] unprotecting 30
[10001]-> [0] [S800080] unprotecting 31
[10001]-> [0] [S800080] unprotecting 32
[10001]-> [0] [S800080] unprotecting 33
[10001]-> [0] [S800080] unprotecting 34
[10001]-> [0] [S800080] unprotecting 35
[10001]-> [0] [S800080] unprotecting 36
[10001]-> [0] [S800080] unprotecting 37
[10001]-> [0] [S800080] unprotecting 38
[10001]-> [0] [S800080] unprotecting 39
[10001]-> [0] [S800080] unprotecting 3a
[10001]-> [0] [S800080] unprotecting 3b
[10001]-> [0] [S800080] unprotecting 3c
[10001]-> [0] [S800080] unprotecting 3d
[10001]-> [0] [S800080] unprotecting 3e
[10001]-> [0] [S800080] unprotecting 3f
[10001]-> [0] [S800080] unprotecting 40
[10001]-> [0] [S800080] unprotecting 41
[10001]-> [0] [S800080] unprotecting 42
[10001]-> [0] [S800080] Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x807D6 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 526230 Bytes = 513 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #97 Mon Aug 27 17:52:09 CEST 2001
Boot arguments: console=ttyS0 ro root=/dev/mtdblock/3
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ro root=/dev/mtdblock/3
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30792k available (960k kernel code, 392k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20376kB/6792kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:43:45:a7
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var"
0x00160000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k int
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.08.26-20:11+0000) multi-c
all bircS starting
Mounting /proc device
Mounting /dev/pts
Mounting /var
Mounting /var/tmp on ramfs
Starting inetd
Setting hostname
Lade module
Lade lcd
lcd.o: LCD driver (KS0713) module
Lade i2c-8xx
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Starte aniplay
[1] 40
checke ucodes
/var/ucodes/avia500.ux: No such file or directory
/var/ucodes/avia600.ux: No such file or directory
/var/ucodes/ucode.bin: No such file or directory
/var/ucodes/cam-alpha.bin: No such file or directory
Lade memctl.o workaroud , hope it works
clr(): Device or resource busy
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
avia_core.c: do_firmread: Unable to load '/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade gtx_core
gtx-core.c: init_gtx: gtxID 0b
gtx-core.c: init_gtx: loaded AViA GTX core driver
Lade demux
Lade cam
/lib/modules/2.4.2/misc/cam.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade dmxdev
Lade dvbdev
Lade dvb
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_flush_pcr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_read_message
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_reset
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_write_message
Lade ves1893
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol register_demod
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol unregister_demod
Lade gtx_dmx
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol unregister_demux
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol register_demux
Lade gtx_fb
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
CXA2092 found
CXA2092 found
CXA2092 found
CXA2092 found
CXA2092 found
[1] Done /bin/aniplay /usr/ani/dbox-neu.ani &
Setting up loopback device
starting ftpd
FTP4ALL 3.012, Copyright (C) 1996-2000 by Crescent (crescent@ftp4all.de)
This program is FREE SOFTWARE and distributed under GNU PUBLIC LICENSE
Server on host dbox is ready and listening on *:21
Base directory : /var/
Readme file : (none)
Permission file: .permissions
Errlog file : log/ftpd.err
Log file : log/ftpd.log
Log program : (none)
Server program : /sbin/ftps
###########################################
## ##
## V 27 , ezap + neutrino + lcars ##
## ##
## N O T F O R S A L E !! ##
## ##
###########################################
killall: aniplay: no process killed
[1] 104
Please press Enter to activate this console.
StartMenu dbox2 Linux Projekt
2001 by Andre Paul
clear failed: Device or resource busy
graphic mode failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel failed: Device or resource busy
set_pixel
usw...
danke
-
rasc
- Senior Member
- Beiträge: 5071
- Registriert: Dienstag 18. September 2001, 00:00
-
luztz
- Neugieriger
- Beiträge: 11
- Registriert: Sonntag 13. Oktober 2002, 20:46
-
luztz
- Neugieriger
- Beiträge: 11
- Registriert: Sonntag 13. Oktober 2002, 20:46
-
luztz
- Neugieriger
- Beiträge: 11
- Registriert: Sonntag 13. Oktober 2002, 20:46
Hallo
Jetzt habe ich das Log
......
eth0: CPM ENET Version 0.2, 00:50:9c:43:45:a7
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var"
0x00160000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k int
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.08.26-20:11+0000) multi-c
all bircS starting
Mounting /proc device
Mounting /dev/pts
Mounting /var
Mounting /var/tmp on ramfs
Starting inetd
Setting hostname
Lade module
Lade lcd
lcd.o: LCD driver (KS0713) module
Lade i2c-8xx
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Starte aniplay
[1] 40
checke ucodes
73
73
f3
93
42
63
b3
c3
ea
1d
0f
50
0f
00
44
a5
avia500.ux ist nicht OK
6a
74
8f
b2
80
00
73
8c
af
eb
9e
27
44
3a
c6
23
avia600.ux ist NICHT OK
65
82
a8
9e
7e
13
e4
10
c3
66
e4
7b
4e
f9
d3
8e
ucode.bin ist NICHT OK
7f
56
e6
93
a9
16
b3
9a
6e
27
34
dc
9b
5a
ab
7a
cam-alpha.bin ist NICHT OK
Lade memctl.o workaroud , hope it works
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
Lade gtx_core
gtx-core.c: init_gtx: gtxID 0b
gtx-core.c: init_gtx: loaded AViA GTX core driver
Lade demux
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
registering device.
Lade ves1893
i2c-core.o: driver VES1893 DVB DECODER registered.
feID: 1893 dd
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
sync: 21
vber: 5b20
using QPSK
sync: 20
Lade gtx_dmx
gen_dmx: found gtx
Lade gtx_fb
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
CXA2092 found
CXA2092 found
CXA2092 found
CXA2092 found
CXA2092 found
Setting up loopback device
starting ftpd
FTP4ALL 3.012, Copyright (C) 1996-2000 by Crescent (crescent@ftp4all.de)
This program is FREE SOFTWARE and distributed under GNU PUBLIC LICENSE
Server on host dbox is ready and listening on *:21
Base directory : /var/
Readme file : (none)
Permission file: .permissions
Errlog file : log/ftpd.err
Log file : log/ftpd.log
Log program : (none)
Server program : /sbin/ftps
###########################################
## ##
## V 27 , ezap + neutrino + lcars ##
## ##
## N O T F O R S A L E !! ##
## ##
###########################################
[1] 104
[1] Done /bin/aniplay /usr/ani/dbox-neu.ani &
Please press Enter to activate this console.
StartMenu dbox2 Linux Projekt
2001 by Andre Paul
Starte /var/etc/neutrino.sh...
Starte neutrino (zapit)
Network LCD-Driver 0.1
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
Controld 0.1
[controld] set volume: 0
killall: camd: no process killed
sh: tcsetpgrp: Inappropriate ioctl for device
Zapit $Id: zapit.c,v 1.25 2001/09/19 23:30:31 field Exp $
Scanning a cable section
70 channels added
Please report to faralla@gmx.de if you see less in your neutrino-channellist
CAID is: 1702
Channels have been loaded succesfully
$Id: sectionsd.cpp,v 1.58 2001/09/20 19:22:10 fnbrd Exp $
caching 120 hours
events are old 60min after their end time
[1] 124
sh: tcsetpgrp: Inappropriate ioctl for device
CHCH [DEMUX] START 3
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 4
CHCH [DEMUX] START 4
CHCH [DEMUX] START 5
NeutrinoNG $Id: neutrino.cpp,v 1.43 2001/09/20 19:21:37 fnbrd Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supported
Using zapit
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
[FONT] FTC_Face_Requester (Arial Black/Regular)
CNeutrinoApp::run - objects initialized...
read locale: deutsch
doing network setup...
IP : 192.168.000.202
Netmask : 255.255.255.000
Broadcast: 192.168.000.255
SIOCADDRT: Network is unreachable
scanning locale dir now....(perhaps)
locale found: deutsch
locale found: english
[FONT] FTC_Face_Requester (Arial/Regular)
That was returned: 00a
Changed to TV-mode
That was returned: 00c
All channels received
zapping by name
CHCH [DECODER] ABORT
Using a frequency of: 370000 and a Symbolrate of 6900000
sync: 0
CHCH [DEMUX] START 6
CHCH [DEMUX] STOP 6
CHCH [DEMUX] START 6
query epg for onid_tsid >85000a< (PREMIERE 1)
Poll Timeout
Using standard-Pids
Zapping to PREMIERE 1. VPID: 0x01ff. APID: 0x0512, PMT: 0x0065, Frequency: 37000
0
CHCH [DEMUX] START 1
CHCH [DEMUX] START 0
CHCH [DECODER] SETSTREAMTYPE
CHCH [DECODER] PLAY
Zapping by name returned successful
got apids for: PREMIERE 1 - 0 apids!
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
query epg for onid_tsid >85000a< (PREMIERE 1)
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
query epg for onid_tsid >85000a< (PREMIERE 1)
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
query epg for onid_tsid >85000a< (PREMIERE 1)
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
query epg for onid_tsid >85000a< (PREMIERE 1)
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
Bilschirm schwarz -
die Programme lassen sich umschalten -
>>Aber kein Bildinhalt und kein Ton!
Nach einem Menue zum Programme einstellen habe ich vergeblich gesucht !!
danke
Jetzt habe ich das Log
......
eth0: CPM ENET Version 0.2, 00:50:9c:43:45:a7
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var"
0x00160000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k int
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.08.26-20:11+0000) multi-c
all bircS starting
Mounting /proc device
Mounting /dev/pts
Mounting /var
Mounting /var/tmp on ramfs
Starting inetd
Setting hostname
Lade module
Lade lcd
lcd.o: LCD driver (KS0713) module
Lade i2c-8xx
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Starte aniplay
[1] 40
checke ucodes
73
73
f3
93
42
63
b3
c3
ea
1d
0f
50
0f
00
44
a5
avia500.ux ist nicht OK
6a
74
8f
b2
80
00
73
8c
af
eb
9e
27
44
3a
c6
23
avia600.ux ist NICHT OK
65
82
a8
9e
7e
13
e4
10
c3
66
e4
7b
4e
f9
d3
8e
ucode.bin ist NICHT OK
7f
56
e6
93
a9
16
b3
9a
6e
27
34
dc
9b
5a
ab
7a
cam-alpha.bin ist NICHT OK
Lade memctl.o workaroud , hope it works
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
Lade gtx_core
gtx-core.c: init_gtx: gtxID 0b
gtx-core.c: init_gtx: loaded AViA GTX core driver
Lade demux
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
registering device.
Lade ves1893
i2c-core.o: driver VES1893 DVB DECODER registered.
feID: 1893 dd
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
sync: 21
vber: 5b20
using QPSK
sync: 20
Lade gtx_dmx
gen_dmx: found gtx
Lade gtx_fb
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
CXA2092 found
CXA2092 found
CXA2092 found
CXA2092 found
CXA2092 found
Setting up loopback device
starting ftpd
FTP4ALL 3.012, Copyright (C) 1996-2000 by Crescent (crescent@ftp4all.de)
This program is FREE SOFTWARE and distributed under GNU PUBLIC LICENSE
Server on host dbox is ready and listening on *:21
Base directory : /var/
Readme file : (none)
Permission file: .permissions
Errlog file : log/ftpd.err
Log file : log/ftpd.log
Log program : (none)
Server program : /sbin/ftps
###########################################
## ##
## V 27 , ezap + neutrino + lcars ##
## ##
## N O T F O R S A L E !! ##
## ##
###########################################
[1] 104
[1] Done /bin/aniplay /usr/ani/dbox-neu.ani &
Please press Enter to activate this console.
StartMenu dbox2 Linux Projekt
2001 by Andre Paul
Starte /var/etc/neutrino.sh...
Starte neutrino (zapit)
Network LCD-Driver 0.1
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
Controld 0.1
[controld] set volume: 0
killall: camd: no process killed
sh: tcsetpgrp: Inappropriate ioctl for device
Zapit $Id: zapit.c,v 1.25 2001/09/19 23:30:31 field Exp $
Scanning a cable section
70 channels added
Please report to faralla@gmx.de if you see less in your neutrino-channellist
CAID is: 1702
Channels have been loaded succesfully
$Id: sectionsd.cpp,v 1.58 2001/09/20 19:22:10 fnbrd Exp $
caching 120 hours
events are old 60min after their end time
[1] 124
sh: tcsetpgrp: Inappropriate ioctl for device
CHCH [DEMUX] START 3
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 4
CHCH [DEMUX] START 4
CHCH [DEMUX] START 5
NeutrinoNG $Id: neutrino.cpp,v 1.43 2001/09/20 19:21:37 fnbrd Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supportedUsing zapit
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
[FONT] FTC_Face_Requester (Arial Black/Regular)
CNeutrinoApp::run - objects initialized...
read locale: deutsch
doing network setup...
IP : 192.168.000.202
Netmask : 255.255.255.000
Broadcast: 192.168.000.255
SIOCADDRT: Network is unreachable
scanning locale dir now....(perhaps)
locale found: deutsch
locale found: english
[FONT] FTC_Face_Requester (Arial/Regular)
That was returned: 00a
Changed to TV-mode
That was returned: 00c
All channels received
zapping by name
CHCH [DECODER] ABORT
Using a frequency of: 370000 and a Symbolrate of 6900000
sync: 0
CHCH [DEMUX] START 6
CHCH [DEMUX] STOP 6
CHCH [DEMUX] START 6
query epg for onid_tsid >85000a< (PREMIERE 1)
Poll Timeout
Using standard-Pids
Zapping to PREMIERE 1. VPID: 0x01ff. APID: 0x0512, PMT: 0x0065, Frequency: 37000
0
CHCH [DEMUX] START 1
CHCH [DEMUX] START 0
CHCH [DECODER] SETSTREAMTYPE
CHCH [DECODER] PLAY
Zapping by name returned successful
got apids for: PREMIERE 1 - 0 apids!
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
query epg for onid_tsid >85000a< (PREMIERE 1)
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
query epg for onid_tsid >85000a< (PREMIERE 1)
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
query epg for onid_tsid >85000a< (PREMIERE 1)
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
query epg for onid_tsid >85000a< (PREMIERE 1)
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
Bilschirm schwarz -
die Programme lassen sich umschalten -
>>Aber kein Bildinhalt und kein Ton!
Nach einem Menue zum Programme einstellen habe ich vergeblich gesucht !!
danke
-
rasc
- Senior Member
- Beiträge: 5071
- Registriert: Dienstag 18. September 2001, 00:00
-
luztz
- Neugieriger
- Beiträge: 11
- Registriert: Sonntag 13. Oktober 2002, 20:46
-
rollorcs
- Einsteiger
- Beiträge: 357
- Registriert: Mittwoch 29. August 2001, 00:00
-
luztz
- Neugieriger
- Beiträge: 11
- Registriert: Sonntag 13. Oktober 2002, 20:46