dbox geht nach booting aus

[jules-2000]

Hi,
ich weiß dies thema gab es schon,aber ich habe keine lösung sie fährt sauber hoch undnach booting ist vorbei. hat jemand ein tip ist ne phillps.
danke

[DieMade]

Log posten hilft ungemein.

[jules-2000]

also ich kriege das so ganz gut auf die reihe aber wie mache ich das mit dem log???

[DieMade]

Bootmanager nur mit COM (9600 Baud) starten und Box einschalten.

[jules-2000]

Jo danke hat geklappt:

debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 203252
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .. .
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 582785 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 582721 Bytes = 569 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (tuxbox@linux) (gcc version 3.2) #1 Die Sep 3 21:32:44 CEST
2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30928k available (1016k kernel code, 360k data, 64k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
i2c-proc.o version 2.6.1 (20010825)
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2a:6f:b8
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k init
init started: BusyBox v0.60.3 (2002.09.04-10:36+0000) multi-call[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: load_dram_image: Microcode verify: 25681 errors.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
BusyBox v0.60.3 (2002.09.04-10:36+0000) multi-call binary

Usage: busybox [function] [arguments]...
or: [function] [arguments]...

BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use, and BusyBox
will act like whatever it was invoked as.

Currently defined functions:
[, ash, busybox, cat, chgrp, chmod, chown, clear, cmp, cp, date,
dd, df, dmesg, du, echo, env, false, find, grep, gunzip, gzip,
halt, hostname, ifconfig, init, kill, killall, klogd, ln, ls,
mkdir, mknod, more, mount, mv, nslookup, pidof, ping, poweroff,
ps, pwd, reboot, reset, rm, rmdir, route, sed, sh, sleep, sort,
sync, syslogd, tail, tar, test, touch, true, tty, umount, uname,
uniq, uptime, vi, wc, wget, which, whoami, xargs, yes, zcat

/lib/modules/2.4.19/misc/avia_gt.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_flush_pcr
/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_gt_pcm_set_mpeg_attenuati
on
/lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_gt_pcm_set_pcm_attenuatio
n
Init TDA8044H
/lib/modules/2.4.19/misc/tda8044h.o: unresolved symbol register_frontend
/lib/modules/2.4.19/misc/tda8044h.o: unresolved symbol unregister_frontend
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol unregister_demux
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_queue_irq
_enable
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pcr_p
id
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_queue
_write_pointer
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_alloc_que
ue_teletext
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_get_queue
_irq
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol register_demux
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pid_t
able
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_force_dis
continuity
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pid_c
ontrol_table
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol gtx_set_queue_pointer

/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_get_info
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_alloc_que
ue_video
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_free_queu
e
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_queue_irq
_disable
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_alloc_que
ue_audio
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_get_queue
_write_pointer
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_alloc_que
ue_user
/lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_free_irq
/lib/modules/2.4.19/misc/avia_gt_vbi.o: unresolved symbol avia_gt_get_info
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_show
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_get_clut
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_input_si
ze
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_pos
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_hide
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_get_info
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_size
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_input_mo
de
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_clut
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_blevel
/lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_get_info
/lib/modules/2.4.19/misc/avia_gt_oss.o: unresolved symbol avia_gt_pcm_play_buffe
r
/lib/modules/2.4.19/misc/avia_gt_oss.o: unresolved symbol avia_gt_pcm_stop
/lib/modules/2.4.19/misc/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_signed

/lib/modules/2.4.19/misc/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_endian

/lib/modules/2.4.19/misc/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_rate
/lib/modules/2.4.19/misc/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_width
/lib/modules/2.4.19/misc/avia_gt_oss.o: unresolved symbol avia_gt_pcm_poll
/lib/modules/2.4.19/misc/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_channe
ls
/lib/modules/2.4.19/misc/avia_gt_oss.o: unresolved symbol avia_gt_pcm_set_pcm_at
tenuation
/lib/modules/2.4.19/misc/avia_gt_oss.o: unresolved symbol avia_gt_pcm_get_block_
size
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
[TIMERD]IDS: 0
$Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] /dev/dvb/card0/ca0: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[sectionsd] DMX: DMX_STOP: Bad file descriptor
$Id: zapit.cpp,v 1.216 2002/09/04 13:57:39 neBox Exp $

cp: /var/keys/irdeto: No such file or directory
cp: /var/keys/seca: No such file or directory
cp: /var/keys/via: No such file or directory
cp: /var/keys/nagra: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[getservices.cpp] going to parse satellite Astra 19.2E
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[zapit] LoadServices: success
[zapit] reading Bouquets ..............
[zapit] Found 14 bouquets.
[zapit:bouquets.cpp:renumServices] In Bouquets: TV Channels #: 104, Radio Channe
ls #: 11.
[zapit:bouquets.cpp:makeRemainingChannelsBouquet] TV Channels #: 537, Radio Chan
nels #: 224.
[zapit] channels have been loaded succesfully
/dev/dvb/card0/frontend0: No such file or directory
[zapit] unable to open frontend devices. bye.
Segmentation fault
93: Killed
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
Network LCD-Driver $Id: lcdd.cpp,v 1.54 2002/08/31 22:30:27 obi Exp $

[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[lcdd] month-skin not found -> using default...
[lcdd] load config
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $

[controld] Boxtype detected: (02, 2, 3, Philips)
set event: 00000009
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.318 2002/09/07 16:33:46 dirch Exp $

[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
/dev/fb/0: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
cmp: /var/keys/irdeto: No such file or directory
cp: /var/tmp/irdeto: No such file or directory
cmp: /var/keys/seca: No such file or directory
cp: /var/tmp/seca: No such file or directory
cmp: /var/keys/via: No such file or directory
cp: /var/tmp/via: No such file or directory
cmp: /var/keys/nagra: No such file or directory
cp: /var/tmp/nagra: No such file or directory

The system is going down NOW !!
Sending SIGKILL to all processes.
STV6412 found
Unmounting ramfs
Unmounting jffs2
write 1 event's ...
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt

[DieMade]

cp: /var/keys/irdeto: No such file or directory
cp: /var/keys/seca: No such file or directory
cp: /var/keys/via: No such file or directory
cp: /var/keys/nagra: No such file or directory

Und das ist auch gut so!

Geh woanders spielen!

[jules-2000]

Das ist so nicht ganz richtig. der ist auf dieser eingestellt und ich komme nicht ins menü um neutrino direkt starten auszuschalten. das da keine keys drin sind hab ich auch gesehen, deswegen habe ich es ja auch drauf. habe selbst ein abo, finde mich jetzt ein wenig angegriffen bzw. zu unrecht beschuldigt. aber danke für deine hilfe. nehme mal an das da irgendwas mit den avia nicht stimmt.

[chkdesign]

finde mich jetzt ein wenig angegriffen bzw. zu unrecht beschuldigt

Genau!

ps: http://dboxupdate.berlios.de

[DieMade]

Flashe ein Image von hier: http://dboxupdate.berlios.de, dann werden Sie auch geholfen!

Als Tasmanier bin ich Tierschutzbefürworter und mag es nicht, wenn jemand große Laufvögel in kleine Blechkisten sperrt!

[jules-2000]

Na denn nochmal danke. ist aber wirklich so. habe gelesen das da dieses mit dem clipmode drauf ist und das wollte ich mal testen.
nochmal danke.

[jules-2000]

damit ist jetzt zwar vielleicht mein prob weg aber ich weiß immer noch nicht woran es gelegen hat.

[DieMade]

http://tuxbox.berlios.de/forum/viewtopic.php?t=10199

Das gilt für's ganze Board! Und Laufvogel-Images haben nunmal was mit Dunkel-schauen zu tun!

[jules-2000]

Tja das war wohl eher nichts. immer noch der selbe fehler

[DieMade]

Nachmal Log posten (ohne Vogel ) und dann schaun 'mer mal.

[jules-2000]

Hier nochmal :

9debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-c1.b2.96.07.00.00-cb
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 202996
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Aug 5 2002 - 09:06:03)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 577057 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 576993 Bytes = 563 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Son Sep 22 10:35:10 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30944k available (1008k kernel code, 356k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2a:6f:b8
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu
les/2.4.19/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.19/misc/info.o
Using /lib/modules/2.4.19/misc/event.o
event: init ...
Using /lib/modules/2.4.19/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
Using /lib/modules/2.4.19/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.19/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.19/misc/dvb_demux.o
Using /lib/modules/2.4.19/misc/dvbdev.o
Using /lib/modules/2.4.19/misc/avia.o
AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $
avia_core.c: load_dram_image: Microcode verify: 25681 errors.
Using /lib/modules/2.4.19/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
insmod: init_module: avia: Input/output error
Using /lib/modules/2.4.19/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.19/misc/dmxdev.o
Using /lib/modules/2.4.19/misc/dvb_frontend.o
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
Using /lib/modules/2.4.19/misc/avia_gt.o
insmod: unresolved symbol avia_set_pcr
Using /lib/modules/2.4.19/misc/dvb.o
insmod: unresolved symbol avia_wait
insmod: unresolved symbol avia_wr
insmod: unresolved symbol avia_command
insmod: unresolved symbol avia_rd
insmod: unresolved symbol avia_flush_pcr
insmod: unresolved symbol avia_gt_pcm_set_mpeg_attenuation
insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation
Init TDA8044H
Using /lib/modules/2.4.19/misc/tda8044h.o
insmod: unresolved symbol register_frontend
insmod: unresolved symbol unregister_frontend
Using /lib/modules/2.4.19/misc/avia_gt_napi.o
insmod: unresolved symbol avia_gt_dmx_queue_reset
insmod: unresolved symbol unregister_demux
insmod: unresolved symbol avia_gt_dmx_queue_irq_enable
insmod: unresolved symbol avia_gt_dmx_set_pcr_pid
insmod: unresolved symbol avia_gt_dmx_release_section_filter
insmod: unresolved symbol avia_gt_dmx_alloc_queue_teletext
insmod: unresolved symbol avia_gt_dmx_fake_queue_irq
insmod: unresolved symbol avia_gt_dmx_get_queue_irq
insmod: unresolved symbol avia_gt_dmx_set_filter_parameter_table
insmod: unresolved symbol register_demux
insmod: unresolved symbol avia_gt_dmx_set_pid_table
insmod: unresolved symbol avia_gt_dmx_force_discontinuity
insmod: unresolved symbol avia_gt_dmx_set_pid_control_table
insmod: unresolved symbol avia_gt_dmx_get_hw_sec_filt_avail
insmod: unresolved symbol avia_gt_dmx_get_queue_info
insmod: unresolved symbol avia_gt_dmx_set_section_filter
insmod: unresolved symbol avia_gt_get_info
insmod: unresolved symbol avia_gt_dmx_alloc_queue_video
insmod: unresolved symbol avia_gt_dmx_free_queue
insmod: unresolved symbol avia_gt_dmx_queue_irq_disable
insmod: unresolved symbol avia_gt_dmx_alloc_queue_audio
insmod: unresolved symbol avia_gt_dmx_alloc_queue_message
insmod: unresolved symbol avia_gt_dmx_alloc_queue_user
insmod: unresolved symbol avia_gt_free_irq
Using /lib/modules/2.4.19/misc/avia_gt_vbi.o
insmod: unresolved symbol avia_gt_get_info
Using /lib/modules/2.4.19/misc/avia_gt_fb.o
insmod: unresolved symbol avia_gt_gv_show
insmod: unresolved symbol avia_gt_gv_get_clut
insmod: unresolved symbol avia_gt_gv_set_input_size
insmod: unresolved symbol avia_gt_gv_set_pos
insmod: unresolved symbol avia_gt_gv_hide
insmod: unresolved symbol avia_gt_get_info
insmod: unresolved symbol avia_gt_gv_set_size
insmod: unresolved symbol avia_gt_gv_set_input_mode
insmod: unresolved symbol avia_gt_gv_set_clut
insmod: unresolved symbol avia_gt_gv_set_blevel
insmod: unresolved symbol avia_gt_gv_get_info
Using /lib/modules/2.4.19/misc/avia_gt_oss.o
insmod: unresolved symbol avia_gt_pcm_play_buffer
insmod: unresolved symbol avia_gt_pcm_stop
insmod: unresolved symbol avia_gt_pcm_set_signed
insmod: unresolved symbol avia_gt_pcm_set_endian
insmod: unresolved symbol avia_gt_pcm_set_rate
insmod: unresolved symbol avia_standby
insmod: unresolved symbol avia_gt_pcm_set_width
insmod: unresolved symbol avia_gt_pcm_poll
insmod: unresolved symbol avia_get_sample_rate
insmod: unresolved symbol avia_gt_pcm_set_channels
insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation
insmod: unresolved symbol avia_gt_pcm_get_block_size
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

Network LCD-Driver $Id: lcdd.cpp,v 1.54 2002/08/31 22:30:27 obi Exp $

[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
[sectionsdclient] connect: No such file or directory
$Id: sectionsd.cpp,v 1.135 2002/10/04 16:31:25 thegoodguy Exp $
caching 504 hours
events are old 60min after their end time
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[camd] /dev/dvb/card0/ca0: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[sectionsd] DMX: DMX_STOP: Bad file descriptor
$Id: zapit.cpp,v 1.253 2002/10/04 18:25:17 thegoodguy Exp $

/var/tuxbox/config/zapit/zapit.conf: No such file or directory
[zapit] /var/tuxbox/config/zapit/zapit.conf not found
/var/tuxbox/config/zapit/services.xml: No such file or directory
[zapit] error parsing services!
/dev/dvb/card0/frontend0: No such file or directory
[zapit] unable to open frontend devices. bye.
unable to open file /var/tuxbox/config/zapit/zapit.conffor writing.
Segmentation fault
Controld $Id: controld.cpp,v 1.64 2002/10/05 20:46:20 dirch Exp $

[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (02, 2, 3, Philips)
set event: 00000009
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[nhttpd] Neutrino HTTP-Server starting..
/var/tuxbox/config/nhttpd.conf: No such file or directory
unable to open file /var/tuxbox/config/nhttpd.conffor writing.
/var/tuxbox/config/nhttpd.conf: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.335 2002/10/05 20:46:20 dirch Exp $

[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
STV6412 found
Unmounting ramfs
write 1 event's ...
umount: /var/tmp: Device or resource busy
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
Unmounting jffs2
umount: /var: Device or resource busy
Oops: umount failed -- trying to remount readonly...
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: No such file or directory

The system is going down NOW !!
Sending SIGTERM to all processe[nhttpd] stop requested......
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
System halt

[DieMade]

avia_core.c: load_dram_image: Microcode verify: 25681 errors.

Da stimmt was mit Deinen uCodes nicht. Sind die denn auf der Box oder haste das in der Eile jetzt vergessen?

[jules-2000]

jo ich glaube ich habe was vergessen. fang nochmal von vorne an

[jules-2000]

na das ist es auch nicht. die kiste macht mich wahnsinnig. ich habe keine ahnung mehr hat noch jemand nen tip?????

[DieMade]

Sind die uCodes denn jetzt auf der Box oder nicht?

[jules-2000]

die ucodes bestehen doch aus den avia, ucode und camalpha bin oder habe ich noch was vergessen. die habe ich drauf aber es ist genau die selbe log

[Zahni]

Dann sind die Dinger kaputt. Neue suchen oder vom originalen BN-Image nehmen.

-Zahni

[DieMade]

Ne, ist schon OK: avia500.ux, avia600.ux, cam-alpha.bin & ucode.bin.

Entweder ist die avia600.ux nicht OK, oder das Vogel-Image hat irgendwie den AVIA zerschossen (falls das per SW überhaupt geht?).

[jules-2000]

Jo, nachdem ich noch eine nacht darüber geschlfen habe und ich heute morgen gucken wollte welher avia auf den board ist, ist mir aufgefallen das cirka auf der länge von 1 cm die füßchen von avia zusammen gedrückt waren. mit sehr viel mühe habe ich sie dann auseinander gefrimelt.man war das ein scheiß. vor allen dingen fast blind und ohne lupe. aber naja dann mal angeschlossen und sie läuft wieder.. hiermit möchte ich mich nochmal für eure schnelle hilfe bedanken. es gibt nicht viele boards wo man so schnell hilfe bekommt

[DieMade]

Gern geschehen (so lange Du jetzt die armen Vögel nicht wieder in die enge Box sperrst ).

Aber wie um Gotteschristnachtswillen bekommt man DAS denn hin? Der AVIA ist bei der Philips doch nun wirklich weit genug von den Flash-Chips weg!?

[jules-2000]

naja, die antwort bin ich dir wohl schuldig.
wir haben gestern um 13 uhr besuch bekommen. da war auch ein kleiner junge bei der 3 jahre alt ist. da die box in meinen zimmer auf den tisch stand, offen, wollte er wohl ein wenig mithelfen. vielleich war es auch anders aber so ungefähr muß es passiert sein