CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x84A22 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 543202 Bytes = 530 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Hallo,
ich habe eine Nokia 2x Intel
läuft alles prima, nur mein problem (egal bei welchem image)
schalte ich die box aus in standby und wieder ein klappt alles super ohne probleme.
schalte ich die box aber aus in deepstandby und wieder ein bleibt das display schwarz nur die beleuchtung geht an.
dann hilft nur netzstecker ziehen und sie läuft wieder einwandfrei.
hat das mit der alten cpu und dem alten board zu tun. die box hat sogar noch die jumper drauf.
vieleicht deshalb auch "*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***"
vieleicht hat ja einer eine lösung und es ist doch keine hardware bug.
allen viel spaß mit euren boxen
DrHase
Schwarzes Display
-
DrHase
- Neugieriger
- Beiträge: 7
- Registriert: Freitag 8. November 2002, 22:42
-
rollorcs
- Einsteiger
- Beiträge: 357
- Registriert: Mittwoch 29. August 2001, 00:00
-
DrHase
- Neugieriger
- Beiträge: 7
- Registriert: Freitag 8. November 2002, 22:42
Danke schon mal für die schnelle Antwort
hier das ganze log mit nem alten ppcboot
nach dem hochfahren habe ich sie mit halt runtergefahren
gleiche efekt mit dem fehler wie deepstandby
DrHase
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-3e.29.02.07.00.00-b5
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.9
debug: Sending TFTP-request for file C/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet:
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x87C67 (0x1E00 bytes)
FB logo at: 0x84A7E (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.9
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/dbox2/cdkro
ot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/dbox2/
cdkroot/
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2,
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.9
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/2 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 64k in
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call
dbox2miniroot zum Flash auslesen v1.0
linux@dbox2 Project http://dbox2.elxsi.de
Wilkommen auf ihrer dbox2
druecken sie bitte einmal Enter
und danach geben sie ein
cat /dev/mtd/5 >/flash.img
das dauert ca 2 bis 5 minuten
dann kommt die Raute wieder
dann befindet sich in c: dbox2 cdkroot
die Datei flash.img , die ganz genau 8257536 Bytes
gross sein solte !
das ist dann ihr backup Flashimage das sie gut aufheben sollten
danach koennen sie die dbox2 einfach ausmachen
Please press Enter to activate this console.
BusyBox v0.60.2 (2002.02.26-14:29+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# halt
The system is going down NOW !!
Sending SIGTERM to all processesTerminated
# Sending SIGKILL to all processes.
The system is halted. Press CTRL-ALT-DEL or turn off power
System halted.
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: A0003A7F LR: 00001032 SP: C022FD30 REGS: c022fe80 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'init' Last syscall: 88
last math 00000000 last altivec 00000000
GPR00: C0009D48 C022FD30 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000000F C0009D34 C0277060 C022FCB0 533F5F33 1005E150 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00009032 0022FE70 01F9FE58 00000002
GPR24: C0002440 10056184 10050000 10040000 7FFFFE8C 00000000 7FFFFF3C 0000000A
Call backtrace:
C014EB37 C000F548 C00054F0 C000291C C0002E7C C0002718 C014EB37
C000F548 C00054F0 C000291C C0002E7C C0002718 C014EB37 C000F548
C00054F0 C000291C C0002E7C C0002718 C014EB37 C000F548 C00054F0
C000291C C0002E7C C0002718 C014EB37 C000F548 C00054F0 C000291C
C0002E7C C0002718 C014EB37 C000F548 C00054F0
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..
hier das ganze log mit nem alten ppcboot
nach dem hochfahren habe ich sie mit halt runtergefahren
gleiche efekt mit dem fehler wie deepstandby
DrHase
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-3e.29.02.07.00.00-b5
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.9
debug: Sending TFTP-request for file C/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet:
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x87C67 (0x1E00 bytes)
FB logo at: 0x84A7E (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.9
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/dbox2/cdkro
ot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/dbox2/
cdkroot/
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2,
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.9
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/2 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 64k in
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call
dbox2miniroot zum Flash auslesen v1.0
linux@dbox2 Project http://dbox2.elxsi.de
Wilkommen auf ihrer dbox2
druecken sie bitte einmal Enter
und danach geben sie ein
cat /dev/mtd/5 >/flash.img
das dauert ca 2 bis 5 minuten
dann kommt die Raute wieder
dann befindet sich in c: dbox2 cdkroot
die Datei flash.img , die ganz genau 8257536 Bytes
gross sein solte !
das ist dann ihr backup Flashimage das sie gut aufheben sollten
danach koennen sie die dbox2 einfach ausmachen
Please press Enter to activate this console.
BusyBox v0.60.2 (2002.02.26-14:29+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# halt
The system is going down NOW !!
Sending SIGTERM to all processesTerminated
# Sending SIGKILL to all processes.
The system is halted. Press CTRL-ALT-DEL or turn off power
System halted.
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: A0003A7F LR: 00001032 SP: C022FD30 REGS: c022fe80 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'init' Last syscall: 88
last math 00000000 last altivec 00000000
GPR00: C0009D48 C022FD30 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000000F C0009D34 C0277060 C022FCB0 533F5F33 1005E150 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00009032 0022FE70 01F9FE58 00000002
GPR24: C0002440 10056184 10050000 10040000 7FFFFE8C 00000000 7FFFFF3C 0000000A
Call backtrace:
C014EB37 C000F548 C00054F0 C000291C C0002E7C C0002718 C014EB37
C000F548 C00054F0 C000291C C0002E7C C0002718 C014EB37 C000F548
C00054F0 C000291C C0002E7C C0002718 C014EB37 C000F548 C00054F0
C000291C C0002E7C C0002718 C014EB37 C000F548 C00054F0 C000291C
C0002E7C C0002718 C014EB37 C000F548 C00054F0
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..
-
DieMade
- Oberlamer, Administrator & Supernanny
- Beiträge: 10532
- Registriert: Samstag 13. Juli 2002, 10:49
-
DrHase
- Neugieriger
- Beiträge: 7
- Registriert: Freitag 8. November 2002, 22:42
So diesmal ein komplettes log vom relativ altem einfachen image
erst eingeschaltet dann standby dann wieder an
und dann deepstandby.
danach läßt sich die box nur mit netzstecker ziehen starten
DrHase
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-3e.29.02.07.00.00-b5
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0196
will verify ELF image, start= 0x800000, size= 202876
verify sig: 262
Branching to 0x40000
ppcboot 0.6.4 (Mar 2 2002 - 20:44:32)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet:
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x87C67 (0x1E00 bytes)
FB logo at: 0x84A7E (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x84A22 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 543202 Bytes = 530 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (von alexW) (gcc version 3.0.4) #1 Son Mr 3 00:30:21 CET 200
2
Boot arguments: ro root=/dev/mtdblock/3 console=ttyS0
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/mtdblock/3 console=ttyS0
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30748k available (984k kernel code, 412k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20328kB/6776kB, 64 slots per queue
eth0: CPM ENET Version 0.2,
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k int
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call Real Time Cloc
k Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mice: PS/2 mouse device common for all mice
Loading /share/keymaps/i386/qwertz/de.kmap.gz
Couldnt get a file descriptor referring to the console
event: init ...
Init VES1820 / VES1893
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.28 2002/03/17 16:25:38 happydude Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
write 1 event's ...
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
registering device.
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
VES1893: attaching VES1893 at 0x10 to adapter
registering frontend...
gtx-core.c: init_gtx: gtxID 0b
gtx-core.c: init_gtx: loaded AViA GTX core driver
gen_dmx: found gtx
avia_vbi: version (Mar 20 2002-13:03:15)
avia_vbi: got demux C-Cube - AViA GTX/DMX
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
$Id: gtx_capture.c,v 1.3 2001/12/01 06:37:06 gillem Exp $
gtx_pig: init
gtx_pig: WIDTH=160, S=0, HEIGHT=144
CXA2092 found
CXA2092 found
Network LCD-Driver $Id: lcdd.cpp,v 1.43 2002/03/18 00:02:57 McClean Exp $
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
$Id: sectionsd.cpp,v 1.109 2002/03/29 15:47:18 obi Exp $
caching 96 hours
events are old 60min after their end time
dmxdev: set buffer size 40000 -> 60000
$Id: zapit.cpp,v 1.115 2002/04/04 14:41:08 rasc Exp $
dmxdev: set buffer size 40000 -> 60000
Poll timeout
[zapit] CAID is: 1702
dmxdev: set buffer size 40000 -> 60000
[getservices.cpp] scanning a satellite section
[getservices.cpp] going to parse satellite Astra 19.2E
dmxdev: set buffer size 40000 -> 60000
[zapit] reading Bouquets ...................................................
[zapit] Found 52 bouquets.
[zapit] channels have been loaded succesfully
Controld $Id: controld.cpp,v 1.57 2002/03/29 15:47:18 obi Exp $
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
SWITCH LETTER BOX
[nhttpd] Neutrino HTTP-Server starting..
dmxdev: set buffer size 40000 -> 60000
httpd gestartet
NeutrinoNG $Id: neutrino.cpp,v 1.212 2002/04/02 14:59:42 obi Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supported
Software update enabled
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
[CHTTPUpdater] HTTP-Basepath: http://tuxbox:nokia@mitglied.lycos.ddoing network
setup...
IP : 192.168.0.3init soft-update-stuffcurrent flash-version: 1.1.20
dmxdev: set buffer size 40000 -> 60000
..............................................
[tune.cpp] frontend_status 1
[tune.cpp] frontend_status 4dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
[controld] videoOutput off
[controld] IOCTL: : Invalid arguSWITCH LETTER BOX
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
[controld] videoOutput on
SWITCH LETTER BOX
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
neutrino exit
lcddclient: connect: Connection refused
The system is going down NOW !!
Sending SIGTERM to all processesSending SIGKILL to all processes.
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt
erst eingeschaltet dann standby dann wieder an
und dann deepstandby.
danach läßt sich die box nur mit netzstecker ziehen starten
DrHase
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-3e.29.02.07.00.00-b5
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0196
will verify ELF image, start= 0x800000, size= 202876
verify sig: 262
Branching to 0x40000
ppcboot 0.6.4 (Mar 2 2002 - 20:44:32)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet:
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x87C67 (0x1E00 bytes)
FB logo at: 0x84A7E (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x84A22 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 543202 Bytes = 530 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (von alexW) (gcc version 3.0.4) #1 Son Mr 3 00:30:21 CET 200
2
Boot arguments: ro root=/dev/mtdblock/3 console=ttyS0
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/mtdblock/3 console=ttyS0
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30748k available (984k kernel code, 412k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20328kB/6776kB, 64 slots per queue
eth0: CPM ENET Version 0.2,
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k int
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call Real Time Cloc
k Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mice: PS/2 mouse device common for all mice
Loading /share/keymaps/i386/qwertz/de.kmap.gz
Couldnt get a file descriptor referring to the console
event: init ...
Init VES1820 / VES1893
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.28 2002/03/17 16:25:38 happydude Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
write 1 event's ...
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
registering device.
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
VES1893: attaching VES1893 at 0x10 to adapter
registering frontend...
gtx-core.c: init_gtx: gtxID 0b
gtx-core.c: init_gtx: loaded AViA GTX core driver
gen_dmx: found gtx
avia_vbi: version (Mar 20 2002-13:03:15)
avia_vbi: got demux C-Cube - AViA GTX/DMX
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
$Id: gtx_capture.c,v 1.3 2001/12/01 06:37:06 gillem Exp $
gtx_pig: init
gtx_pig: WIDTH=160, S=0, HEIGHT=144
CXA2092 found
CXA2092 found
Network LCD-Driver $Id: lcdd.cpp,v 1.43 2002/03/18 00:02:57 McClean Exp $
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
$Id: sectionsd.cpp,v 1.109 2002/03/29 15:47:18 obi Exp $
caching 96 hours
events are old 60min after their end time
dmxdev: set buffer size 40000 -> 60000
$Id: zapit.cpp,v 1.115 2002/04/04 14:41:08 rasc Exp $
dmxdev: set buffer size 40000 -> 60000
Poll timeout
[zapit] CAID is: 1702
dmxdev: set buffer size 40000 -> 60000
[getservices.cpp] scanning a satellite section
[getservices.cpp] going to parse satellite Astra 19.2E
dmxdev: set buffer size 40000 -> 60000
[zapit] reading Bouquets ...................................................
[zapit] Found 52 bouquets.
[zapit] channels have been loaded succesfully
Controld $Id: controld.cpp,v 1.57 2002/03/29 15:47:18 obi Exp $
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
SWITCH LETTER BOX
[nhttpd] Neutrino HTTP-Server starting..
dmxdev: set buffer size 40000 -> 60000
httpd gestartet
NeutrinoNG $Id: neutrino.cpp,v 1.212 2002/04/02 14:59:42 obi Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supportedSoftware update enabled
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
[CHTTPUpdater] HTTP-Basepath: http://tuxbox:nokia@mitglied.lycos.ddoing network
setup...
IP : 192.168.0.3init soft-update-stuffcurrent flash-version: 1.1.20
dmxdev: set buffer size 40000 -> 60000
..............................................
[tune.cpp] frontend_status 1
[tune.cpp] frontend_status 4dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
[controld] videoOutput off
[controld] IOCTL: : Invalid arguSWITCH LETTER BOX
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
[controld] videoOutput on
SWITCH LETTER BOX
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
neutrino exit
lcddclient: connect: Connection refused
The system is going down NOW !!
Sending SIGTERM to all processesSending SIGKILL to all processes.
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt
-
rollorcs
- Einsteiger
- Beiträge: 357
- Registriert: Mittwoch 29. August 2001, 00:00
-
DrHase
- Neugieriger
- Beiträge: 7
- Registriert: Freitag 8. November 2002, 22:42
-
rollorcs
- Einsteiger
- Beiträge: 357
- Registriert: Mittwoch 29. August 2001, 00:00
Bin zwar schon ein wenig müde, aber meiner Meinung nach sieht das Log vollkommen in Ordnung aus.
Wenn du die Box aus dem Deepstandby wieder mit der Fernbedienung einschaltest, kommt dann irgendwas auf der seriellen Console????
Ansonsten sieht mir das wohl eher nach einem Problem an den Flashbausteinen aus.
Mir fallen die Döppen dicht, geht jetzt ins Bett, bis morgen!
Gruß
Ralf
Wenn du die Box aus dem Deepstandby wieder mit der Fernbedienung einschaltest, kommt dann irgendwas auf der seriellen Console????
Ansonsten sieht mir das wohl eher nach einem Problem an den Flashbausteinen aus.
Mir fallen die Döppen dicht, geht jetzt ins Bett, bis morgen!
Gruß
Ralf
_______________________________
NTARS---Never touch a running system
NTARS---Never touch a running system
-
DrHase
- Neugieriger
- Beiträge: 7
- Registriert: Freitag 8. November 2002, 22:42
danke für die hilfe und gute erholsamen schalf.
ich gebe mich einfach zufrieden das ich sie nur in standby schalten kann.
und wenn ich sie mal resetten muß. zieh ich halt den stecker.
auf jeden fall tritt das auf egal ob linux oder original premiere software. bestimmt ein hardware fehler. kann man die geräte trotz geänderter software bei premiere einsenden ist ja garantie drauf. oder ist sie mit dem eingriff erloschen ?
allen eine gute nacht
drhase
ich gebe mich einfach zufrieden das ich sie nur in standby schalten kann.
und wenn ich sie mal resetten muß. zieh ich halt den stecker.
auf jeden fall tritt das auf egal ob linux oder original premiere software. bestimmt ein hardware fehler. kann man die geräte trotz geänderter software bei premiere einsenden ist ja garantie drauf. oder ist sie mit dem eingriff erloschen ?
allen eine gute nacht
drhase
-
rmaerte1
- Semiprofi
- Beiträge: 1293
- Registriert: Montag 21. Januar 2002, 23:27
-
DrHase
- Neugieriger
- Beiträge: 7
- Registriert: Freitag 8. November 2002, 22:42
-
rmaerte1
- Semiprofi
- Beiträge: 1293
- Registriert: Montag 21. Januar 2002, 23:27
-
DrHase
- Neugieriger
- Beiträge: 7
- Registriert: Freitag 8. November 2002, 22:42
Ich habe auch noch keine andere lösung gefunden.
wenn du das problem bei den boxen die du bekommst lösen solltest, kannst du das ja posten.
würde mich freunen dann hätte ich ein problem weniger.
wünsch dir viel erfolg.
und allen viel spaß mit linux power. wenn wir erstmal alle linux auf der xbox haben.
gruß drhase
wenn du das problem bei den boxen die du bekommst lösen solltest, kannst du das ja posten.
würde mich freunen dann hätte ich ein problem weniger.
wünsch dir viel erfolg.
und allen viel spaß mit linux power. wenn wir erstmal alle linux auf der xbox haben.
gruß drhase
-
rmaerte1
- Semiprofi
- Beiträge: 1293
- Registriert: Montag 21. Januar 2002, 23:27
-
SoLaLa
- Tuxboxer
- Beiträge: 6119
- Registriert: Mittwoch 3. April 2002, 00:32
-
rmaerte1
- Semiprofi
- Beiträge: 1293
- Registriert: Montag 21. Januar 2002, 23:27