debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.2, My IP 192.168.1.250
debug: Sending TFTP-request for file C/WINDOWS/Desktop/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 201852
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Feb 28 2002 - 20:04:24)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-32-cb-8a
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.250
Filename 'C/WINDOWS/Desktop/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FE0FB8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.250
Filename 'C/WINDOWS/Desktop/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FE0FB8 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.250
Filename 'C/WINDOWS/Desktop/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 685793 Bytes = 669 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (wild@p200) (gcc version 3.0.4) #2 Mon Apr 8 21:20:03 CEST 2
002
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.1.2:C/WINDOWS/Des
ktop/yadd/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.1.2:C/WINDOW
S/Desktop/yadd/cdkroot/
time_init: decrementer frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30408k available (1252k kernel code, 472k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20101kB/6700kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:32:cb:8a
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.1.2, my address is 192.168.1.250
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.1.2
Looking up port of RPC 100005/2 on 192.168.1.2
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k in
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modpro
Danke
)