nämlich garnicht_debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.201, My IP 192.168.0.202
debug: Sending TFTP-request for file C/WIN98/Desktop/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 204200
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jun 24 2002 - 20:39:15)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet:
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.201; our IP address is 192.168.0.202
Filename 'C/WIN98/Desktop/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FD2814 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.201; our IP address is 192.168.0.202
Filename 'C/WIN98/Desktop/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ##############
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
BOOTP broadcast 1
TFTP from server 192.168.0.201; our IP address is 192.168.0.202
Filename 'C/WIN98/Desktop/yadd/tftpboot/kernel-yadd'.
Load address: 0x100000
Loading: #######################################################################
########################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 565449 Bytes = 552 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Son Aug 4 11:27:43 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.0.2
01:C/WIN98/Desktop/yadd/yaddroot/
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30896k available (1072k kernel code, 332k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2,
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.0.201, my address is 192.168.0.202
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.202, domain=, nis-domain=(none),
bootserver=192.168.0.201, rootserver=192.168.0.201, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.201
Looking up port of RPC 100005/1 on 192.168.0.201
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.61.pre (2002.05.26-17:53+0000) multi-ca[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
write 1 event's ...
write 1 event's ...
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
Illegal instruction
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
avia_gt_core: $Id: avia_gt_core.c,v 1.20 2002/06/07 14:00:23 tmbinc Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.14 2002/06/07 18:06:03 Jolt Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.91 2002/07/08 15:12:47 wjoost Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: Successfully loaded ucode V0.14
avia_gt_dmx: RISC mem map size: 2048
avia_gt_gv: $Id: avia_gt_gv.c,v 1.21 2002/07/21 15:16:22 waldi Exp $
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.14 2002/06/07 18:06:03 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.21 2002/08/06 13:06:30 wjoost Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.27 2002/08/06 13:06:30 wjoost Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.18 2002/06/07 18:06:03 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Init VES1820
i2c-core.o: driver VES1820 DVB demodulator registered.
VES1820: attaching VES1820 at 0x10
i2c-core.o: client [VES1820] registered to adapter [](pos. 4).
VES1820: attached to adapter
$Id: ves1820.c,v 1.31 2002/08/17 02:03:18 Homar Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.88 2002/05/07 16:59:19 Jolt Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.15 2002/07/02 09:31:22 LazyT Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.35 2002/08/11 13:07:34 waldi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
CXA2092 found
CXA2092 found
Please press Enter to activate thOops: kernel access of bad area, sig: 11
NIP: C00295AC XER: 20000000 LR: C002958C SP: C1E93D30 REGS: c1e93c80 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0080001A, DSISR: 00000167
TASK = c1e92000[69] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00001032 C1E93D30 C1E92000 00000001 00009032 00000000 C3ADA974 00800002
GPR08: 01800080 C0219DC8 C017B018 C0140000 C016CD1C 1005D18C 00000000 00000000
GPR16: 00000000 00000000 00000000 7FFFFCF8 00009032 01E93F40 00000000 00000902
GPR24: C015991C C0159B14 C0159B14 C3ADA748 00000000 00000200 00000100 C39C4000
Call backtrace:
C0016758 C00AA5F0 C3AD9CD8 C00AECD4 C0092B50 C0092EA4 C008B240
C0092254 C008E1DC C0092114 C00803D4 C005B834 C0032190 C0032070
C00324B4 C00043FC 00000000 100154A8 10015A4C 10016720 10003404
10002FE0 0FEEE908 00000000
is console. Oops: kernel access of bad area, sig: 11
NIP: C00295AC XER: 20000000 LR: C002958C SP: C1E99D30 REGS: c1e99c80 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0080001A, DSISR: 00000167
TASK = c1e98000[70] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00001032 C1E99D30 C1E98000 00000001 00009032 00000000 C3ADA974 00800002
GPR08: 01800080 C0219DC8 C017B018 C0140000 C016CD1C 1005D18C 00000000 00000000
GPR16: 00000000 00000000 00000000 7FFFFCF8 00009032 01E99F40 00000000 00000902
GPR24: C015991C C0159B14 C0159B14 C3ADA748 00000000 00000200 00000100 C39C4000
Call backtrace:
C01F99D0 C00AA5D0 C3AD9CD8 C00AECD4 C0092B50 C0092EA4 C008B240
C0092254 C008E1DC C0092114 C00803D4 C005B834 C0032190 C0032070
C00324B4 C00043FC 00000000 100154A8 10015A4C 10016720 10003404
10002FE0 0FEEE908 00000000
Oops: kernel access of bad area, sig: 11
NIP: C00295AC XER: 20000000 LR: C002958C SP: C1D0DD30 REGS: c1d0dc80 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 33A83404, DSISR: 00000167
TASK = c1d0c000[72] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00001032 C1D0DD30 C1D0C000 00000001 00009032 00000000 C3ADA974 33A833EC
GPR08: 7713FE00 C0C7B018 C017B018 C0140000 C016CD1C 1005D18C 00000000 00000000
GPR16: 00000000 00000000 00000000 7FFFFCF8 00009032 01D0DF40 00000000 00000902
GPR24: C015991C C0159B14 C0159B14 C3ADA748 00000000 00000200 00000100 000002D0
Call backtrace:
C01F9A50 C00AA5E0 C3AD9CD8 C00AECD4 C0092B50 C0092EA4 C008B240
C0092254 C008E1DC C0092114 C00803D4 C005B834 C0032190 C0032070
C00324B4 C00043FC 00000000 100154A8 10015A4C 10016720 10003404
10002FE0 0FEEE908 00000000
Oops: kernel access of bad area, sig: 11
NIP: C000D23C XER: 20000000 LR: C00AA788 SP: C1E89D50 REGS: c1e89ca0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 474F4CFC, DSISR: 00004004
TASK = c1e88000[71] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00000003 C1E89D50 C1E88000 00000000 474F4CF8 00000006 FFFFFFFC 00000000
GPR08: 00000000 00000000 C01688D0 C00AA6D8 C016CD1C 1005D18C 00000000 00000000
GPR16: 00000000 00000000 00000000 7FFFFCF8 00009032 01E89F40 00000000 00000902
GPR24: C015991C C0159B14 C0159B14 C0168CC4 C012FA08 87388000 00000000 00000006
Call backtrace:
C1E89D88 C3AD9D10 C00AECD4 C0092B50 C0092EA4 C008B240 C0092254
C008E1DC C0092114 C00803D4 C005B834 C0032190 C0032070 C00324B4
C00043FC 00000000 100154A8 10015A4C 10016720 10003404 10002FE0
0FEEE908 00000000
Oops: kernel access of bad area, sig: 11
NIP: C000D224 XER: 00000000 LR: C00AA788 SP: C1E0DD50 REGS: c1e0dca0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00010000, DSISR: 000008E6
TASK = c1e0c000[74] 'init' Last syscall: 5
last math 00000000 last altivec 00000000
GPR00: 00000000 C1E0DD50 C1E0C000 00010000 C016CD00 00000020 0000FFFC 00000000
GPR08: 00000000 00000010 C01688D0 C00AA6D8 C016CD1C 1005D18C 00000000 00000000
GPR16: 00000000 00000000 00000000 7FFFFCF8 00009032 01E0DF40 00000000 00000902
GPR24: C015991C C0159B14 C0159B14 C0168EFC C012FA08 00000000 00000000 00000020
Call backtrace:
C1E0DD88 C3AD9D10 C00AECD4 C0092B50 C0092EA4 C008B240 C0092254
C008E1DC C0092114 C00803D4 C005B834 C0032190 C0032070 C00324B4
C00043FC 00000000 100154A8 10015A4C 10016720 10003404 10002FE0
0FEEE908 00000000
neue Snapshotyadd vom 17.08.
-
- Einsteiger
- Beiträge: 226
- Registriert: Mittwoch 22. August 2001, 00:00
neue Snapshotyadd vom 17.08.
Läuft nicht wirklich gut.
Zuletzt geändert von Hollo am Sonntag 18. August 2002, 20:38, insgesamt 1-mal geändert.
Nokia 2xA bmon 1.0 Kabel Avia 500
Sagem 1xI bmon 1.3 Kabel Avia 600L
Sagem 1xI bmon 1.3 Kabel Avia 600L
-
- Tuxboxer
- Beiträge: 2067
- Registriert: Mittwoch 6. März 2002, 15:29
-
- Einsteiger
- Beiträge: 226
- Registriert: Mittwoch 22. August 2001, 00:00