Sagem hängt beim Start

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Jens@dbox
Interessierter
Interessierter
Beiträge: 58
Registriert: Montag 14. Oktober 2002, 19:57

Sagem hängt beim Start

Beitrag von Jens@dbox »

Hallo,
habe Probleme mit Sagem Sat Box. Diese hing mit BN 1.5 bei lade... usw.
Box ist im Debug-Mod.
Habe jetzt versucht Image zu flashen.

Das fuktionierte bis zu folgenden Punkt. Danach hängt die Box.
Was kann man machen?

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-3a.d4.58.07.00.00-e0
debug: HWrev 01 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-3a.d4.58.07.00.00-e0
debug: HWrev 01 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.19
debug: Sending TFTP-request for file V/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-30-cb-36
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.19
Filename 'V/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1

Abort
FB logo not found
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /T/d-box/Dbox2_2/28_2xI.img/28_2xI.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.19
Filename '/T/d-box/Dbox2_2/28_2xI.img/28_2xI.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################
done

dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 66 .... done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash... done

dbox2-ppcboot>





debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-3a.d4.58.07.00.00-e0
debug: HWrev 01 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/sagem-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/sagem-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0208

will verify ELF image, start= 0x800000, size= 208073
verify sig: 262
Branching to 0x40000


ppcboot 0.6.4 (Jul 10 2001 - 11:31:30)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-30-cb-36
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x80832 (0x1C20 bytes)
FB driver (AVIA-ENX) initialized
FB logo at: 0x8247A (0xDDD2 bytes)
Input: serial
Output: serial


1: Console on fb
2: Console on ttyS0
Select (1-4), other keys to stop autoboot: 0
unprotecting 4
[10001]-> [0] [S800080] unprotecting 5
[10001]-> [0] [S800080] unprotecting 6
[10001]-> [0] [S800080] unprotecting 7
[10001]-> [0] [S800080] unprotecting 8
[10001]-> [0] [S800080] unprotecting 9
[10001]-> [0] [S800080] unprotecting a
[10001]-> [0] [S800080] unprotecting b
[10001]-> [0] [S800080] unprotecting c
[10001]-> [0] [S800080] unprotecting d
[10001]-> [0] [S800080] unprotecting e
[10001]-> [0] [S800080] unprotecting f
[10001]-> [0] [S800080] unprotecting 10
[10001]-> [0] [S800080] unprotecting 11
[10001]-> [0] [S800080] unprotecting 12
[10001]-> [0] [S800080] unprotecting 13
[10001]-> [0] [S800080] unprotecting 14
[10001]-> [0] [S800080] unprotecting 15
[10001]-> [0] [S800080] unprotecting 16
[10001]-> [0] [S800080] unprotecting 17
[10001]-> [0] [S800080] unprotecting 18
[10001]-> [0] [S800080] unprotecting 19
[10001]-> [0] [S800080] unprotecting 1a
[10001]-> [0] [S800080] unprotecting 1b
[10001]-> [0] [S800080] unprotecting 1c
[10001]-> [0] [S800080] unprotecting 1d
[10001]-> [0] [S800080] unprotecting 1e
[10001]-> [0] [S800080] unprotecting 1f
[10001]-> [0] [S800080] unprotecting 20
[10001]-> [0] [S800080] unprotecting 21
[10001]-> [0] [S800080] unprotecting 22
[10001]-> [0] [S800080] unprotecting 23
[10001]-> [0] [S800080] unprotecting 24
[10001]-> [0] [S800080] unprotecting 25
[10001]-> [0] [S800080] unprotecting 26
[10001]-> [0] [S800080] unprotecting 27
[10001]-> [0] [S800080] unprotecting 28
[10001]-> [0] [S800080] unprotecting 29
[10001]-> [0] [S800080] unprotecting 2a
[10001]-> [0] [S800080] unprotecting 2b
[10001]-> [0] [S800080] unprotecting 2c
[10001]-> [0] [S800080] unprotecting 2d
[10001]-> [0] [S800080] unprotecting 2e
[10001]-> [0] [S800080] unprotecting 2f
[10001]-> [0] [S800080] unprotecting 30
[10001]-> [0] [S800080] unprotecting 31
[10001]-> [0] [S800080] unprotecting 32
[10001]-> [0] [S800080] unprotecting 33
[10001]-> [0] [S800080] unprotecting 34
[10001]-> [0] [S800080] unprotecting 35
[10001]-> [0] [S800080] unprotecting 36
[10001]-> [0] [S800080] unprotecting 37
[10001]-> [0] [S800080] unprotecting 38
[10001]-> [0] [S800080] unprotecting 39
[10001]-> [0] [S800080] unprotecting 3a
[10001]-> [0] [S800080] unprotecting 3b
[10001]-> [0] [S800080] unprotecting 3c
[10001]-> [0] [S800080] unprotecting 3d
[10001]-> [0] [S800080] unprotecting 3e
[10001]-> [0] [S800080] unprotecting 3f
[10001]-> [0] [S800080] unprotecting 40
[10001]-> [0] [S800080] unprotecting 41
[10001]-> [0] [S800080] unprotecting 42
[10001]-> [0] [S800080] Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x807D6 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 526230 Bytes = 513 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #97 Mon Aug 27 17:52:09 CEST 2001
Boot arguments: console=ttyS0 ro root=/dev/mtdblock/3
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ro root=/dev/mtdblock/3
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30792k available (960k kernel code, 392k data, 56k init, 0k highmem)
kernel BUG at slab.c:629!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C00259B0 XER: 80000A7F LR: C00259B0 SP: C0109F60 REGS: c0109eb0 TRAP: 1000
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c0107fe0[0] 'swapper' Last syscall: 0
last math 00000000 last altivec 00000000
GPR00: C00259B0 C0109F60 C0107FE0 0000001A 00001032 00000001 C0120000 00000000
GPR08: 0000001A C0004640 00000000 C0109EB0 00000002 00031CBC 01FDF400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 01FD9564 01F9FFC0 01F9FC28 C0120000
GPR24: 00000000 C00F3768 00800000 007FFF25 00000000 00001000 00002000 00002000
Call backtrace:
C00259B0 C011BEF8 C0118728 C00021E4
Kernel panic: Attempted to kill the idle task!
In idle task - not syncing
Rebooting in 180 seconds..
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Hm, ist das ne schwarze Sagem?
Dann probier mal ein Image von http://dboxupdate.berlios.de
Jens@dbox
Interessierter
Interessierter
Beiträge: 58
Registriert: Montag 14. Oktober 2002, 19:57

Beitrag von Jens@dbox »

Hallo,
Danke für die Antwort.
Bin schon am verzweifeln :cry:
Nein, es ist eine graue Sagem Box für Sat.
Das empfohlene Image habe ich auch schon probiert. Und mit Yadd bleibt das Ding auch hängen.
Hatte schon mal ne Anfrage im Newbie http://tuxbox.berlios.de/forum/viewtopic.php?t=13852