problem beim booten vom yadd

[grosspeter]

ich hab ein problem beim booten eines yadd und bekomme folgende ausgabe auf dem bildschirm
vielleicht kann mir jemand helfen
mfg
peter

alles vorher abgeschnitten

AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia.o: insmod /lib/modules/2.4.19/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia.o: insmod avia_gt_vbi failed
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.19/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia.o: insmod /lib/modules/2.4.19/misc/avia.o failed
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia.o: insmod dvb_net failed
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2

Please press Enter to activate this console. /dev/dbox/rc0: No such file or dire
ctory

The system is going down NOW !!
Sending SIGKILL to all processes.
STV6412 found
The system is halted. Press CTRL-ALT-DEL or turn off power
write 1 event's ...
System halted.
Oops: kernel access of bad area, sig: 11
NIP: 00000000 XER: 00000000 LR: C0009DD0 SP: C1FEFDF0 REGS: c1fefd40 TRAP: 0400
Not tainted
MSR: 08209032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1fee000[1] 'init' Last syscall: 88
last math 00000000 last altivec 00000000
GPR00: C001B6F8 C1FEFDF0 C1FEE000 00000012 00001032 00000001 FF000000 C01432B7
GPR08: 00000000 00000000 FF002830 C1FEFD10 0000000D 10068FBC 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01FEFF10 00000000 C0004594
GPR24: C0004300 10060FF0 1003B2A0 10060000 00000001 10020000 7FFFFE6C 0000000A
Call backtrace:
10020000 C001B6F8 C000435C 00000000 10020874 7FFFFD58 00000000
100216F0 1003B878 1003B334 0FED9960 00000000
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds..

[chkdesign]

Unable to load '/var/tuxbox/ucodes/avia600.ux'.

Wie wärs, wenn Du Deine ucodes dahin kopierst? Sollte dann laufen.