debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-9b.eb.05.08.00.00-7a
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 36 debug: 4 debug: c0 debug: a8 debug: 0 debug
: 64 debug:
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 0 debug:
64 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 8 debug: d9 debug: ed debug: 97 debug
: e1 debug: c2 debug: 19 debug: 2 debug: 81 debug:
debug: Got BOOTP reply from Server IP 192.168.0.100, My IP 192.168.0.106
debug: Sending TFTP-request for file c0a8006a
debug: TFTP error 0x4 (Illegal TFTP operation)
debug:
TFTP failed, giving up...
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Sagem -- Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
LCD: ready
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: ....
.### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'
### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>
bitte helft mir was mache ich jetzt das kommt wenn ich über seriell flashe
cu lisia
