An die Profis !!!!!!!!!!

Beitrag von **Dago** » Montag 27. August 2001, 21:46

Habe es Jetzt endlich geschaft das ich ein Bild auf dem Fernseher habe aber leideder nur das Bild von der Software

Und die Meldung LOADING

Das Display der Box zeigt

IP eingeben
IP GESETZT

Und hir ist ein Log vom Com Terminal

+debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-f6.3c.ba.07.00.00-a8
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0208

will verify ELF image, start= 0x800000, size= 208157
verify sig: 262
Branching to 0x40000

ppcboot 0.6.4 (Aug 12 2001 - 21:08:11)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-32-35-14
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x841A7 (0x1C20 bytes)
FB driver (AVIA-ENX) initialized
FB logo at: 0x85DEF (0xDDD2 bytes)
Input: serial
Output: serial

1: Console on fb
2: Console on ttyS0
Select (1-2), other keys to stop autoboot: 0
unprotecting 1
[0]-> [0] [Sb000b0] unprotecting 2
[0]-> [0] [Sb000b0] unprotecting 3
[0]-> [0] [Sb000b0] unprotecting 4
[0]-> [0] [Sb000b0] unprotecting 5
[0]-> [0] [Sb000b0] unprotecting 6
[0]-> [0] [Sb000b0] unprotecting 7
[0]-> [0] [Sb000b0] unprotecting 8
[0]-> [0] [Sb000b0] unprotecting 9
[0]-> [0] [Sb000b0] unprotecting a
[0]-> [0] [Sb000b0] unprotecting b
[0]-> [0] [Sb000b0] unprotecting c
[0]-> [0] [Sb000b0] unprotecting d
[0]-> [0] [Sb000b0] unprotecting e
[0]-> [0] [Sb000b0] unprotecting f
[0]-> [0] [Sb000b0] unprotecting 10
[0]-> [0] [Sb000b0] unprotecting 11
[0]-> [0] [Sb000b0] unprotecting 12
[0]-> [0] [Sb000b0] unprotecting 13
[0]-> [0] [Sb000b0] unprotecting 14
[0]-> [0] [Sb000b0] unprotecting 15
[0]-> [0] [Sb000b0] unprotecting 16
[0]-> [0] [Sb000b0] unprotecting 17
[0]-> [0] [Sb000b0] unprotecting 18
[0]-> [0] [Sb000b0] unprotecting 19
[0]-> [0] [Sb000b0] unprotecting 1a
[0]-> [0] [Sb000b0] unprotecting 1b
[0]-> [0] [Sb000b0] unprotecting 1c
[0]-> [0] [Sb000b0] unprotecting 1d
[0]-> [0] [Sb000b0] unprotecting 1e
[0]-> [0] [Sb000b0] unprotecting 1f
[0]-> [0] [Sb000b0] unprotecting 20
[0]-> [0] [Sb000b0] unprotecting 21
[0]-> [0] [Sb000b0] unprotecting 22
[0]-> [0] [Sb000b0] unprotecting 23
[0]-> [0] [Sb000b0] unprotecting 24
[0]-> [0] [Sb000b0] unprotecting 25
[0]-> [0] [Sb000b0] unprotecting 26
[0]-> [0] [Sb000b0] unprotecting 27
[0]-> [0] [Sb000b0] unprotecting 28
[0]-> [0] [Sb000b0] unprotecting 29
[0]-> [0] [Sb000b0] unprotecting 2a
[0]-> [0] [Sb000b0] unprotecting 2b
[0]-> [0] [Sb000b0] unprotecting 2c
[0]-> [0] [Sb000b0] unprotecting 2d
[0]-> [0] [Sb000b0] unprotecting 2e
[0]-> [0] [Sb000b0] unprotecting 2f
[0]-> [0] [Sb000b0] unprotecting 30
[0]-> [0] [Sb000b0] unprotecting 31
[0]-> [0] [Sb000b0] unprotecting 32
[0]-> [0] [Sb000b0] unprotecting 33
[0]-> [0] [Sb000b0] unprotecting 34
[0]-> [0] [Sb000b0] unprotecting 35
[0]-> [0] [Sb000b0] unprotecting 36
[0]-> [0] [Sb000b0] unprotecting 37
[0]-> [0] [Sb000b0] unprotecting 38
[0]-> [0] [Sb000b0] unprotecting 39
[0]-> [0] [Sb000b0] unprotecting 3a
[0]-> [0] [Sb000b0] unprotecting 3b
[0]-> [0] [Sb000b0] unprotecting 3c
[0]-> [0] [Sb000b0] unprotecting 3d
[0]-> [0] [Sb000b0] unprotecting 3e
[0]-> [0] [Sb000b0] unprotecting 3f
[0]-> [0] [Sb000b0] Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x8414B bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 540939 Bytes = 528 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #62 Sun Aug 12 20:39:30 CEST 2001
Boot arguments: console=ttyS0 ro root=/dev/mtdblock/3
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ro root=/dev/mtdblock/3
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30752k available (984k kernel code, 408k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20349kB/6783kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:32:35:14
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k in
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.08.01-12:55+0000) multi-c
all bircS starting
Mounting /proc device
Mounting /dev/pts
MINIX-fs: mounting unchecked file system, running fsck is recommended.
Starting inetd
Setting hostname
Lade module
Lade i2c-8xx
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 03
feID: 00
fpID: 52
enxID: 03
gtxID: ffffffff
hwREV: 21
fpREV: 23
DEMOD: VES1993
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
Lade enx_core
enx-core: Loading AViA eNX core driver
enx-core.c: do_firmread: Failed to read '/ucodes/ucode.bin'.
/lib/modules/2.4.2/misc/enx_core.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade demux
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
registering device.
Lade ves1993
i2c-core.o: driver VES1993 DVB DECODER registered.
readreg
feID: 1893 de
i2c-core.o: client [VES1993] registered to adapter [](pos. 4).
sync: 20
vber: 5ab8
using QPSK
VES_setsymbolrate 22000000
VES_FNR= 0
VES_ratio= 00f471c7
VES_BDR= 0007a38e
VES_BDRI= 86
VES_clrbit1893
sync: 21
VES1993: DBox2 mitel tuner driver
i2c-core.o: driver Mitel tuner driver registered.
i2c-core.o: client [DBox2 Tuner Driver] registered to adapter [](pos. 5).
SET:47680780
SET:25709500
SET:47680780
SET:25709500
VES_setsymbolrate 27500000
VES_FNR= 0
VES_ratio= 01318e38
VES_BDR= 00098c72
VES_BDRI= 6b
VES_clrbit1893
Lade enx_dmx
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol enx_get_reg_addr
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol enx_allocate_irq
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol enx_free_irq
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol enx_get_mem_addr
Lade enx_fb
/lib/modules/2.4.2/misc/enx_fb.o: unresolved symbol enx_get_reg_addr
/lib/modules/2.4.2/misc/enx_fb.o: unresolved symbol enx_get_mem_addr
Setting up loopback device
Lade lcd
lcd.o: LCD driver (KS0713) module
Lade lcdip
starting ftpd
FTP4ALL 3.012, Copyright (C) 1996-2000 by Crescent (crescent@ftp4all.de)
This program is FREE SOFTWARE and distributed under GNU PUBLIC LICENSE
Server on host dbox is ready and listening on *:21
Base directory : /var/
Readme file : (none)
Permission file: .permissions
Errlog file : log/ftpd.err
Log file : log/ftpd.log
Log program : (none)
Server program : /sbin/ftps
EliteDVB is (c) 2001 by Felix Domke <tmbinc@gmx.net>.
It is strictly forbidden to take *ANY* money for this software in *ANY*
form. This includes getting money or goods for installing this soft on a
receiver. The only legal way to install this software is to do it by YOURSELF
using the well-known tools like the dbox2-bootmanager by field (dbox.feldtech.co
m)
Software license is NOT NECESSARY GPL!!!
Off course MODIFYING BINARY IMAGES is FORBIDDEN!
You might modify the source, but all patches have to be open-sourced
/dev/fb/0: No such file or directory
framebuffer not available.
no framebuffer available

Please press Enter to activate this console.

BusyBox v0.50 (2001.08.01-12:55+0000) Built-in shell (lash)
Enter 'help' for a list of built-in commands.

/ #

Habe ich vieleicht die Falschen Uncods???

Danke im voraus

Gruß:Buzi

Habe hir noch mal einen der ist etwas anders

debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0208

will verify ELF image, start= 0x800000, size= 208157
verify sig: 262
Branching to 0x40000

ppcboot 0.6.4 (Aug 12 2001 - 21:08:11)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-32-35-14
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x841A7 (0x1C20 bytes)
FB driver (AVIA-ENX) initialized
FB logo at: 0x85DEF (0xDDD2 bytes)
Input: serial
Output: serial

1: Console on fb
2: Console on ttyS0
Select (1-2), other keys to stop autoboot: 0
unprotecting 1
[0]-> [0] [Sb000b0] unprotecting 2
[0]-> [0] [Sb000b0] unprotecting 3
[0]-> [0] [Sb000b0] unprotecting 4
[0]-> [0] [Sb000b0] unprotecting 5
[0]-> [0] [Sb000b0] unprotecting 6
[0]-> [0] [Sb000b0] unprotecting 7
[0]-> [0] [Sb000b0] unprotecting 8
[0]-> [0] [Sb000b0] unprotecting 9
[0]-> [0] [Sb000b0] unprotecting a
[0]-> [0] [Sb000b0] unprotecting b
[0]-> [0] [Sb000b0] unprotecting c
[0]-> [0] [Sb000b0] unprotecting d
[0]-> [0] [Sb000b0] unprotecting e
[0]-> [0] [Sb000b0] unprotecting f
[0]-> [0] [Sb000b0] unprotecting 10
[0]-> [0] [Sb000b0] unprotecting 11
[0]-> [0] [Sb000b0] unprotecting 12
[0]-> [0] [Sb000b0] unprotecting 13
[0]-> [0] [Sb000b0] unprotecting 14
[0]-> [0] [Sb000b0] unprotecting 15
[0]-> [0] [Sb000b0] unprotecting 16
[0]-> [0] [Sb000b0] unprotecting 17
[0]-> [0] [Sb000b0] unprotecting 18
[0]-> [0] [Sb000b0] unprotecting 19
[0]-> [0] [Sb000b0] unprotecting 1a
[0]-> [0] [Sb000b0] unprotecting 1b
[0]-> [0] [Sb000b0] unprotecting 1c
[0]-> [0] [Sb000b0] unprotecting 1d
[0]-> [0] [Sb000b0] unprotecting 1e
[0]-> [0] [Sb000b0] unprotecting 1f
[0]-> [0] [Sb000b0] unprotecting 20
[0]-> [0] [Sb000b0] unprotecting 21
[0]-> [0] [Sb000b0] unprotecting 22
[0]-> [0] [Sb000b0] unprotecting 23
[0]-> [0] [Sb000b0] unprotecting 24
[0]-> [0] [Sb000b0] unprotecting 25
[0]-> [0] [Sb000b0] unprotecting 26
[0]-> [0] [Sb000b0] unprotecting 27
[0]-> [0] [Sb000b0] unprotecting 28
[0]-> [0] [Sb000b0] unprotecting 29
[0]-> [0] [Sb000b0] unprotecting 2a
[0]-> [0] [Sb000b0] unprotecting 2b
[0]-> [0] [Sb000b0] unprotecting 2c
[0]-> [0] [Sb000b0] unprotecting 2d
[0]-> [0] [Sb000b0] unprotecting 2e
[0]-> [0] [Sb000b0] unprotecting 2f
[0]-> [0] [Sb000b0] unprotecting 30
[0]-> [0] [Sb000b0] unprotecting 31
[0]-> [0] [Sb000b0] unprotecting 32
[0]-> [0] [Sb000b0] unprotecting 33
[0]-> [0] [Sb000b0] unprotecting 34
[0]-> [0] [Sb000b0] unprotecting 35
[0]-> [0] [Sb000b0] unprotecting 36
[0]-> [0] [Sb000b0] unprotecting 37
[0]-> [0] [Sb000b0] unprotecting 38
[0]-> [0] [Sb000b0] unprotecting 39
[0]-> [0] [Sb000b0] unprotecting 3a
[0]-> [0] [Sb000b0] unprotecting 3b
[0]-> [0] [Sb000b0] unprotecting 3c
[0]-> [0] [Sb000b0] unprotecting 3d
[0]-> [0] [Sb000b0] unprotecting 3e
[0]-> [0] [Sb000b0] unprotecting 3f
[0]-> [0] [Sb000b0] Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x8414B bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 540939 Bytes = 528 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #62 Sun Aug 12 20:39:30 CEST 2001
Boot arguments: console=ttyS0 ro root=/dev/mtdblock/3
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ro root=/dev/mtdblock/3
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30752k available (984k kernel code, 408k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20349kB/6783kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:32:35:14
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k in
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.08.01-12:55+0000) multi-c
all bircS starting
Mounting /proc device
Mounting /dev/pts
MINIX-fs: mounting unchecked file system, running fsck is recommended.
Starting inetd
Setting hostname
Lade module
Lade i2c-8xx
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 03
feID: 00
fpID: 52
enxID: 03
gtxID: ffffffff
hwREV: 21
fpREV: 23
DEMOD: VES1993
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
Lade enx_core
enx-core: Loading AViA eNX core driver
enx-core: MEM: 0x9000000->0xC3866000 REG: 0x8000000->0xC3861000
enx-core: ARCH_ID: 0x3 API_VERSION: 0x30
enx-core: VERSION: 0x0 REVISION: 0x0
enx-core: BRD_ID: 0xFF BIU_SEL: 0x1
enx-core: Loaded AViA eNX core driver
Lade demux
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
registering device.
Lade ves1993
i2c-core.o: driver VES1993 DVB DECODER registered.
readreg
feID: 1893 de
i2c-core.o: client [VES1993] registered to adapter [](pos. 4).
sync: 20
vber: 5b20
using QPSK
VES_setsymbolrate 22000000
VES_FNR= 0
VES_ratio= 00f471c7
VES_BDR= 0007a38e
VES_BDRI= 86
VES_clrbit1893
sync: 20
VES1993: DBox2 mitel tuner driver
i2c-core.o: driver Mitel tuner driver registered.
i2c-core.o: client [DBox2 Tuner Driver] registered to adapter [](pos. 5).
SET:47680780
SET:25709500
SET:47680780
SET:25709500
VES_setsymbolrate 27500000
VES_FNR= 0
VES_ratio= 01318e38
VES_BDR= 00098c72
VES_BDRI= 6b
VES_clrbit1893
Lade enx_dmx
gen_dmx: found enx
ENX-INITed -> 0
there MIGHT be no TS <IMG SRC="/forum/images/smiles/icon_frown.gif">
Lade enx_fb
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
Setting up loopback device
Lade lcd
lcd.o: LCD driver (KS0713) module
Lade lcdip
starting ftpd
FTP4ALL 3.012, Copyright (C) 1996-2000 by Crescent (crescent@ftp4all.de)
This program is FREE SOFTWARE and distributed under GNU PUBLIC LICENSE
Server on host dbox is ready and listening on *:21
Base directory : /var/
Readme file : (none)
Permission file: .permissions
Errlog file : log/ftpd.err
Log file : log/ftpd.log
Log program : (none)
Server program : /sbin/ftps
EliteDVB is (c) 2001 by Felix Domke <tmbinc@gmx.net>.
It is strictly forbidden to take *ANY* money for this software in *ANY*
form. This includes getting money or goods for installing this soft on a
receiver. The only legal way to install this software is to do it by YOURSELF
using the well-known tools like the dbox2-bootmanager by field (dbox.feldtech.co
m)
Software license is NOT NECESSARY GPL!!!
Off course MODIFYING BINARY IMAGES is FORBIDDEN!
You might modify the source, but all patches have to be open-sourced
1024k video mem
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth 4) not supported
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] adding font /usr/lib/fonts/Courier_New.ttf...OK (Courier New/Regular)
[FONT] adding font /usr/lib/fonts/Courier_New_Bold.ttf...OK (Courier New/Bold)
[FONT] adding font /usr/lib/fonts/Courier_New_Italic.ttf...OK (Courier New/Itali
c)
[FONT] adding font /usr/lib/fonts/Courier_New_Bold_Italic.ttf...OK (Courier New/
Bold Italic)
[FONT] adding font /usr/lib/fonts/FONT1.ttf...OK (Swiss911 XCm BT/Regular)
[FONT] adding font /usr/lib/fonts/FONT2.ttf...OK (News Gothic Br Medium/Regular)

[FONT] adding font /usr/lib/fonts/FONT3.ttf...OK (SwitzerlandCondensed/Regular)
[FONT] adding font /usr/lib/fonts/Marlett.ttf...OK (Marlett/Regular)
[FONT] Intializing font cache, using max. 4MB...
[EPGC] Initialized EPGCache
streamhack not found - you won't be able to watch Taquilla X!!!
filling boquet list
[EZAP] starting httpd
[NET] httpd server started on port 7575
[EZAP] ok, beginning mainloop
[MEM] 195k (51384 / 148836)
[MEM] 195k (51328 / 148892)
[MEM] 195k (51328 / 148892)
[MEM] 195k (51328 / 148892)
[MEM] 195k (51320 / 148900)

Die Zahlen unten laufen immer weiter

<font size=-1>[ This Message was edited by: Dago on 2001-08-27 22:15 ]</font>

Beitrag von **pofis** » Montag 27. August 2001, 22:22

hi,

ich habe gar nicht gelesen das du die ucodes per ftp auf die box gespielt hast!?
... aber auch wenn, dann kommt wohl noch kein bild, da du erst noch den sendersuchlauf machen musst. spiel mal etwas mit der fernbedienung rum.

gruss olaf

Beitrag von **derget** » Dienstag 28. August 2001, 10:12

das ist alles ok so

hast du denn auch mal die dbox taste gedrückt und ne senderucher gemacht ?

Beitrag von **Dago** » Dienstag 28. August 2001, 15:54

Hallo
Also Fehler beim hochfahren hat sich erledigt !!!
Habe eine Sendersuche Durchgeführt und danach kam ein schwarzer Bildschirm
Alerdings wenn ich eine Taste von 1-0 Drücke kommt unten am Fernseher ein Blauer Balken schaut so aus wie eine Programminfo??????
Der Blaue Balken get nach ca:3sec wieder weg aber nirgendwo ein Bild

Display zeigt aber immer noch

IP eingeben
IP Gesetzt

Ist das normal ????

Hast du mal die Rauf- oder Runtertaste und dann OK gedrückt?

Der_Tester

Beitrag von **Dago** » Dienstag 28. August 2001, 16:53

ja habe ich auch Probirt
Aber im Display müßte doch auch was Stehen
auser ip eingeben ip gesetzt ????

Beitrag von **eurolan** » Dienstag 28. August 2001, 16:59

Das ist ganz Normal ... sonst wird im Display nichts erscheinen..