Problem with Simplegrab 0.41 - Grabvorgang wurde unerwartet

[Jurpo2005]

I got following problems, sorry in English... Help?
Der Grabvorgang wurde unerwartet beendet!


19:22:27.083 [SGMain] 20024 MB auf dem Ziellaufwerk frei
19:22:27.083 [SGMain] 695156 kb Arbeitsspeicher frei
19:22:27.083 [SGMain] Grabvorgang beendet
19:22:27.083 [SGMain] Der Grabvorgang wurde unerwartet beendet!
19:22:17.049 [SGMain] AudioPID0:650
19:22:17.049 [SGMain] VideoPID: 0200
19:22:17.049 [SGMain] Aufnehmen von Sendung: O.C.
19:22:17.049 [SGMain] Aufnehmen von Sender: MTV3
19:22:17.049 [SGMain] Grabvorgang gestartet
19:22:17.049 [SGMain] Programmaufruf: C:\blaablaa\simplegrab_041\ggrab.exe -p 0200 028A -host 192.168.0.3 -o "I:\temp\(15 03 2005 MTV3)" -e m2p -s 1000 -udp 3000 -debug
19:22:17.049 [SGMain] GrabEngine: GGrab
19:22:17.049 [SGMain] Ermittelter Modus: TV
19:22:17.049 [SGMain] Manueller GrabVorgang
19:22:17.049 [SGMain] 20024 MB auf dem Ziellaufwerk frei
19:22:17.049 [SGMain] 695496 kb Arbeitsspeicher frei
19:22:17.049 [SGMain] Windows Version: Microsoft Windows XP (version 5.1) Service Pack 1
19:22:17.049 [SGMain] SimpleGrab Version: 0.41.0.0

[Steran]

Hi!

While testing ggrab-engine with simplegrab, i have had the same problem too.

In my case, i restarted the record, and it worked fine.

If the problem still exists, you should try another grab-engine! (udrec or Wingrabengine)

You can also try to call ggrab manually with the parameter you get from simplegrab (Programmaufruf)
(in your case:
"C:\blaablaa\simplegrab_041\ggrab.exe -p 0200 028A -host 192.168.0.3 -o "I:\temp\(15 03 2005 MTV3)" -e m2p -s 1000 -udp 3000 -debug"
)

Perhaps you get an errormsg from ggrab...and so you can find out what went wrong.

I haven't implemented the feature to get all msgs from the 2 "dos-box-engines", yet.
SimpleGrab checks every 10 seconds, if the grab-engine still grabs (is running).
When not, SG put out an error, and set it's state to "no recording"

sry 4 poor english ;-)

bye

[Jurpo2005]

This gave me following result:

C:\blaablaa\simplegrab_041>ggrab.exe -p 0200 028A -host 192.168
.0.3 -o "I:\temp\(15 03 2005 MTV3)" -e m2p -s 1000 -udp 3000 -debug
ptr:2944 lIn:2880 lOut:0 len:200000
Pufferfehler SearchStreamID

Maybe there is something strange in DVB-stream of MTV3-channel (cable-tv)?

[Steran]

perhaps! Sorry..i can't test it, can't receive mtv3

Does it work with other channels?

Do you get this error immediately?

Are the pids (0200 = Video; 028A = Audio) correct. (check it with technical details of the channel in neutrino)?

Do the other engines work?

[Jurpo2005]

I tried wit different channel

Techical details screen shows
Vpid: 0X0200 (hex)
Apid(s): 0x028a (hex)

With Wingrab

18:16:18.024 [AudioProcessor0] warning: pts discontinuity detected [2160 pts cycles]
18:16:18.024 [AudioProcessor0] invalid audio frame: not a layer I or layer II frame
18:16:18.014 [AudioProcessor0] locked on stream id 192
18:16:12.986 [AudioHTTP0] HTTP streaming started successfully
18:16:12.986 [AudioHTTP0] started
18:16:12.976 [VideoHTTP] HTTP streaming started successfully
18:16:12.976 [VideoHTTP] started
18:16:12.976 [AudioPesParser0] started
18:16:12.976 [AudioProcessor0] started
18:16:12.976 [VideoPesParser] started
18:16:12.976 [VideoProcessor] started
18:16:12.976 [Muxer] started
18:16:11.845 [MuxWriter] started
18:16:11.815 [SGMain] AudioPID0:650
18:16:11.815 [SGMain] VideoPID: 512
18:16:11.815 [SGMain] Aufnehmen von Sendung: Extreme Makeover
18:16:11.815 [SGMain] Aufnehmen von Sender: Nelonen
18:16:11.815 [SGMain] Grabvorgang gestartet
18:16:11.815 [SGMain] GrabEngine: WinGrabEngine
18:16:11.805 [SGMain] Ermittelter Modus: TV
18:16:11.805 [SGMain] Manueller GrabVorgang
18:16:11.805 [SGMain] XXMB auf dem Ziellaufwerk frei
18:16:11.805 [SGMain] XXkb Arbeitsspeicher frei
18:16:11.805 [SGMain] Windows Version: Microsoft Windows XP (version 5.1) Service Pack 1
18:16:11.805 [SGMain] SimpleGrab Version: 0.41.0.0

GGrab

18:17:18.160 [SGMain] XXMB auf dem Ziellaufwerk frei
18:17:18.160 [SGMain] Xkb Arbeitsspeicher frei
18:17:18.160 [SGMain] Grabvorgang beendet
18:17:18.160 [SGMain] Der Grabvorgang wurde unerwartet beendet!
18:17:08.136 [SGMain] AudioPID0:650
18:17:08.136 [SGMain] VideoPID: 0200
18:17:08.136 [SGMain] Aufnehmen von Sendung: Extreme Makeover
18:17:08.136 [SGMain] Aufnehmen von Sender: Nelonen
18:17:08.136 [SGMain] Grabvorgang gestartet
18:17:08.136 [SGMain] Programmaufruf: C:\Program Files\Satelliitti\simplegrab_041\ggrab.exe -p 0200 028A -host 192.168.0.3 -o "I:\temp\(17 03 2005 Nelonen)" -e m2p -s 1000 -udp 3000 -debug
18:17:08.136 [SGMain] GrabEngine: GGrab
18:17:08.136 [SGMain] Ermittelter Modus: TV
18:17:08.136 [SGMain] Manueller GrabVorgang
18:17:08.136 [SGMain] 18810 MB auf dem Ziellaufwerk frei
18:17:08.136 [SGMain] 714920 kb Arbeitsspeicher frei
18:17:08.136 [SGMain] Windows Version: Microsoft Windows XP (version 5.1) Service Pack 1
18:17:08.126 [SGMain] SimpleGrab Version: 0.41.0.0

C:\blaablaa\simplegrab_041>ggrab.exe -p 0200 028A -host 192.16
8.0.3 -o "I:\temp\(17 03 2005 Nelonen)" -e m2p -s 1000 -udp 3000 -debug
xlist::sid: timeout wait for data

UdRec:

Application has generated an exception that could not be handled.
Process id=0xe98 (3736), Thread id=0x6d4 (1748)