Box bleibt bei "Loading Kernel" stehen..

Wie blitze ich ein Bild - Permanent Outgoing Incomes
thome
Beiträge: 1
Registriert: Mittwoch 21. Dezember 2005, 21:05

Box bleibt bei "Loading Kernel" stehen..

Beitrag von thome »

Hallo.

Bin neu im Forum und langsam am verzweifeln da ich keine Lösung für mein Problem finde.

Besitze eine Dbox der älteren Generation. Hatte vor Jahren einmal
Neurtino drauf gehabt. Etwa vor 2 Jahren hat mit ein Freund ein neues
Image auf gespielt mit der möglichkeit mp3 über die Dbox laufen zu
lassen. Voller Freude nahm ich die Box mit nach Hause und spiele an Ihr
solange herum bis Sie nicht mehr bootete bzw. immer nach "Loading
Kernel" stehen bleibt.

So, da ich momentan Urlaub habe wollte mich wieder mal an dieses
Problem heran wagen. Leider hatte ich bis jetzt kein Erfolg.
Besitze eine Nokia Dbox mit 2x Intel.
Habe damals die Box kurzgeschlossen um zu flashen.
Da ich keine Ahnung habe welches Image momentan auf der Box ist,
kann ich keine Auskunft darüber geben.

Anbei lege ich den Code bei, welchen mir die Box ausspuckt.
"Boot net" habe ich schon ausprobiert.

Kann ich die Box wieder zum leben erwecken???

Bin dankbar für jede Hilfe.

MfG
Thome

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-60.0f.80.07.00.00-32
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Nokia --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: . done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>
Houdini
Developer
Beiträge: 2183
Registriert: Mittwoch 10. Dezember 2003, 07:59

Beitrag von Houdini »

Neues Komplettimage flashen und du bist wieder dabei
Doku unter http://wiki.tuxbox.org
Installation http://wiki.tuxbox.org/Installation