Nach dem aufspielen des Images Bild grün

Beitrag von **joe11** » Donnerstag 2. März 2006, 16:15

Hallo zusammen!
Folgendes Problem: Habe D-Box2 von Nokia Kabel im Debug-mode
Egal welches Image ich draufspiele, danach hab ich einen grünen Bildschirm.
Menü kommt, ucodes sind da.Nach dem ich bei Kabel Deutschland einen Sendersuchlauf gemacht habe geht die Box von alleine aus, nun boote ich neu und Kabel-deutschland ist verschwunden, nur noch Sat da. Ich kann nicht auf kabelbetrieb umstellen.Das menü sagt: keine Sender verfügbar, soll suchlauf machen, kann wie gesagt nicht mehr auf Kabel-Deutschland umstellen. Ich glaube die Box ist Kaputt, ODER?

Beitrag von **mash4077** » Donnerstag 2. März 2006, 16:18

Hi,

bitte Bootlog posten.

Siehe:
http://forum.tuxbox-cvs.sourceforge.net ... hp?t=15918

Gruß
mash

Beitrag von **joe11** » Donnerstag 2. März 2006, 16:22

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 655428 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 655364 Bytes = 640 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... debug: DDF: Calibrating delay loop... debug: D
DF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-8e.c0.05.07.00.00-1d
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>

Beitrag von **joe11** » Donnerstag 2. März 2006, 16:24

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-8e.c0.05.07.00.00-1d
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.69.1, My IP 192.168.69.202
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-14-41-37
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.69.1; our IP address is 192.168.69.202
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.69.1; our IP address is 192.168.69.202
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.69.1; our IP address is 192.168.69.202
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.69.1; our IP address is 192.168.69.202
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 3
TFTP from server 192.168.69.1; our IP address is 192.168.69.202
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T

Beitrag von **mash4077** » Donnerstag 2. März 2006, 16:34

Zieh mal das Netzwerkkabel von der Box ab und lass die Kiste einfach durchstarten. Dabei den Bootmanager auf der seriellen Konsole mitlaufen lassen.

Gruß
mash

Beitrag von **joe11** » Donnerstag 2. März 2006, 17:23

Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:14:41:37
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00500000 : "root (SquashFS)"
0x00500000-0x007e0000 : "var (JFFS2)"
0x007e0000-0x00800000 : "FLFS (U-Boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.31-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.31-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.31-dbox2/misc/avs.o
Using /lib/modules/2.4.31-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.31-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.31-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38AD12C XER: 00000000 LR: C38AD11C SP: C1B39D50 REGS: c1b39ca0 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1b38000[54] 'insmod' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: 00000000 C1B39D50 C1B38000 00000001 00008004 D0006001 0000001B C1B3803C
GPR08: 0000D048 C38B5000 C38B0000 C38B5000 C0150000 10065BE4 10040000 00000001
GPR16: 10060000 C38B0000 C38B0000 C38B0000 C38B0000 00000330 C38B0000 C38B0000
GPR24: 0000039F C38B7000 00000E7C D0006001 00008004 00000000 C38BA22C 0000564C
Call backtrace:
00000000 C38AD200 C38ADDB4 C38AF7CC C0010FF4 C000285C 7FFFD130
10016654 10003D80 10003998 0FEC2F6C 00000000
Bus error
Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.31-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/ves1820.o
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o
Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o
Starting pid 103, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

$Id: sectionsd.cpp,v 1.201 2005/11/22 20:59:33 metallica Exp $
caching 504 hours
events are old 180min after their end time
$Id: zapit.cpp,v 1.386 2006/01/22 13:16:29 carjay Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38AD098 XER: 20000000 LR: C38AD088 SP: C157DE10 REGS: c157dd60 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c157c000[131] 'zapit' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C157DE10 C157C000 00000001 000000E0 20006F06 00000000 C3B5D9E8
GPR08: 00000000 C38B5000 C38B0000 C0004BE0 84002028 10034484 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 0157DF40 C3B5D9E8 C1F11CF0
GPR24: C157F280 00000001 00000000 00000000 000000E0 00000000 00000000 00000000
Call backtrace:
C003D9C8 C3B5DEC0 C38895E4 C3884368 C0042B5C C000285C 00000000
100129D0 10012AA0 1000EC80 10011464 0FCB8F6C 00000000
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38AD098 XER: 00000000 LR: C38AD088 SP: C15E5DB0 REGS: c15e5d00 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c15e4000[133] 'controld' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C15E5DB0 C15E4000 00000001 000003B0 C15E5E14 C15E5E50 C3B5D35C
GPR08: 00000000 C38B5000 C38B0000 C0004BE0 84002028 1001F198 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 015E5F40 C3B5D35C C1B189E0
GPR24: C1345BA0 00000002 00000000 C15E5E14 000003B0 00000000 400C6F37 C15E5E50
Call backtrace:
C15E5E50 C38AF5E4 C3B5D68C C38895E4 C3884368 C0042B5C C000285C
3000A7C8 10004B4C 1000531C 1000465C 0FC64F6C 00000000
[nhttpd] Neutrino HTTP-Server starting..
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...[camd2] ca system id: 1722
OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
rm: cannot remove `/var/etc/.sectionsd': No such file or directory
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] received 0 sats
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] registering as event client
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
error while loading palette: /share/tuxbox/neutrino/icons/radiomode.pal
[sectionsd] getUTC: read: Connection timed out
error while loading icon: /share/tuxbox/neutrino/icons/radiomode.raw
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused

Beitrag von **mash4077** » Donnerstag 2. März 2006, 17:29

Wenn die ucodes i.O. sind, dann ist da wohl der Avia kaputt.

Näheres kann dir ein Hardwareexperte sagen.

Gruß
mash

Beitrag von **joe11** » Donnerstag 2. März 2006, 17:33

Die ucodes laufen auf meinen anderen Boxen ohne Probleme.
Dann sag ich mal Danke

Dann gibts heute noch ein Schlachtfest
Weil das Display ja noch gut ist.
Und der rest kommt in die Tonne
Eine weniger

Thx

Beitrag von **mash4077** » Donnerstag 2. März 2006, 17:35

Wie gesagt, du kannst ja noch mal die Antwort eines Hardwareexperten abwarten.

Das Schlachtefest hat doch sicher noch ein paar Stunden Zeit.

Gruß
mash

Beitrag von **joe11** » Donnerstag 2. März 2006, 17:44

Alles Klar, mach ich.

Aber Hoffnung habe ich keine mehr.

Beitrag von **joe11** » Freitag 3. März 2006, 19:30

Hab die Box bei Ebay verkauft.

Ende

Danke für eure Hilfe

Beitrag von **petb** » Freitag 3. März 2006, 19:52

Wow, innerhalb eines Tages Box neo ebay verkauft.
Das ging ja schnell.
Als defekt oder ???
Was haste denn dafür bekommen ?
Bye
PetB