Box boot nicht mehr

Wie blitze ich ein Bild - Permanent Outgoing Incomes
RN_Holodoc
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Freitag 16. Juni 2006, 20:36

Box boot nicht mehr

Beitrag von RN_Holodoc »

Hallo!

Wollte heute morgen meine Box anschalten (Nokia, Kabel), und mußte festellen das sie nicht mehr startet.

Sie bleibt bei 5 Balken im Display stehen. Ich habe die Box daraufhin direkt an den PC geklemmt mit einem seriellen Kabel und dem Netzwerkkabel und habe den D-Box-Manager gestartet. Bei diesem bleibt die Box bei folgender Zeile stehen:

debug: Transmitting B00TP request via broadcast

Woran kann es liegen, daß die Box an dieser Stelle stehenbleibt? Ich weiß im Moment nicht weiter, Bitte dringend um Hilfe, Haussegen hängt sonst mehr als schief!!! :o
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

Hallo!

Was sagt denn das komplette Log?

Gruß Nachtvogel
Bild
RN_Holodoc
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Freitag 16. Juni 2006, 20:36

Beitrag von RN_Holodoc »

Ÿdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: NVIDIA nForce Networking Controller - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.xx.xx
IP-Adresse die die dbox bekommt: 192.168.xx.xxx
Comport: Kommunikationsanschluss (COM1)
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: AMD Athlon(tm) XP 3000+ @ 2167 MHz
Dateiname des Images:
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.0
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

Firewall abgeschaltet / deinstalliert?
Hast Du überhaupt ein Image zum flashen ausgewählt?
Bei Dateiname des Images steht nichts.

Gruß Nachtvogel
Bild
RN_Holodoc
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Freitag 16. Juni 2006, 20:36

Beitrag von RN_Holodoc »

Hallo,

Ja ist abgeschaltet, und das Image hab ich nicht rein geschrieben.

Gruß Holodoc
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

Da Du das Image nicht nennst, nehme ich an, es ist unsupportet.
Ich ziehe mich zurück.

Gruß Nachtvogel
Bild
RN_Holodoc
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Freitag 16. Juni 2006, 20:36

Beitrag von RN_Holodoc »

Hallo,

Ich kann es schon nennen, aber dachte das sowas vielleicht nicht gewünscht ist im Forum.

Ich weiß das es Images gibt die nicht ...

Da ich erst seit 2 wochen wieder was an meiner Box mache, weiß ich garnicht was aktuell ist. Hatte leider seit 1 1/2 Jahren keine Möglichkeit die Box anzuschließen.

Das einzige Image das ich noch besitze heißt

alexW2xBaseimageV1.6.10

Leider hab ich alles was, D-Box angeht bei einen Rechnerabsturz verloren.
Ich hab dieses Forum auch nur über Google gefunden.
Hab keinerlei Links mehr.

Also es ist nichts illegales.

Griß holodoc
jmittelst
Tuxboxer
Tuxboxer
Beiträge: 6044
Registriert: Montag 17. November 2003, 06:48

Beitrag von jmittelst »

Lass mal ein Bootlog durchlaufen, kein log von einem Flashversuch. http://wiki.tuxbox-cvs.sourceforge.net/Bootlog

Images: http://wiki.tuxbox-cvs.sourceforge.net/Images

cu
Jens
RN_Holodoc
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Freitag 16. Juni 2006, 20:36

Beitrag von RN_Holodoc »

Hallo,

kommt leider auch nnur das selbe

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-58.3f.41.07.00.00-4c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast

hab ich mit dem D-Box Manager gemacht.

Danke für die Links, werd mir unter anderem gleich mal ein neues Images raus suchen, und hoffen das ich nicht gleich wieder umziehen muß.

Gruß Holodoc
jmittelst
Tuxboxer
Tuxboxer
Beiträge: 6044
Registriert: Montag 17. November 2003, 06:48

Beitrag von jmittelst »

Mach da mal den ds-ID raus, die ist unique.

Wenn das Log da endet, stimmt was ganz gewaltig nicht.

Lass die Box mal einen MemoryCheck machen.
"Haltet jetzt beim Starten der DBox2 die Pfeil-nach-oben Taste (die an der DBox2) gedrückt, dadurch wird ein Memory-Check ausgelöst und die DBox2 bleibt mit einem Prompt in der seriellen Konsole stehen."
Quelle: http://wiki.tuxbox-cvs.sourceforge.net/ ... net_failed
RN_Holodoc
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Freitag 16. Juni 2006, 20:36

Beitrag von RN_Holodoc »

Hallo,

da kommt jetzt folgendes:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-58.3f.41.07.00.00-4c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>

Was meinst du mit ds-ID?
Weiß leider nicht was du meinst, oder steh wieder auf der Leitung.

Gruß Holodoc
jmittelst
Tuxboxer
Tuxboxer
Beiträge: 6044
Registriert: Montag 17. November 2003, 06:48

Beitrag von jmittelst »

debug: fpID 5a dsID
Die ds-ID läßt Rückschlüsse auf die genaue Box zu (Seriennummer).

Was passiert, wenn Du da im Com-Terminal jetzt "boot" eingibst (natürlich ohne Gänsefüßchen)?

cu
Jens
RN_Holodoc
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Freitag 16. Juni 2006, 20:36

Beitrag von RN_Holodoc »

Hallo,

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-58.3f.xx.xx.xx.xx-xx :D
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast

und wieder die selbe Stelle.

Gruß holodoc
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

Hallo!

Gieb mal boot flash ein.

Gruß Nachtvogel
Bild
RN_Holodoc
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Freitag 16. Juni 2006, 20:36

Beitrag von RN_Holodoc »

Hallo,

Also da geht es dann mächtig weiter.

In der Box selbst seht dann wieder ein Sendername (ARD).

Nach einen Neustart, bleibt sie aber wieder an der selben Stelle stehen.

Kann ich da jetzt irgendwie ein neues Images (neutrino-jffs2)einspielen?

Gruß Holodoc
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

RN_Holodoc hat geschrieben:Hallo,

Also da geht es dann mächtig weiter.
Das hätte mich jetzt schon interesiert, wie das Log weiter geht.
Fährt die Box hoch und kannst Du auch umschalten, fernsehen usw.?
Bild
RN_Holodoc
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Freitag 16. Juni 2006, 20:36

Beitrag von RN_Holodoc »

Hallo,

Also hier mal die Log:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-58.3f.41.07.00.00-4c
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot flash

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 155204
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (May 28 2006 - 10:14:15)

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ..... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 655167 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 655103 Bytes = 639.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (k2@debian) (gcc version 3.4.4) #5 Sa Jun 10 15:18:24
CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30860k available (1112k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:41:63:d1
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00400000 : "root (squashfs)"
0x00400000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: Warning: kernel-module version mismatch
/lib/modules/2.4.32-dbox2/misc/dbox2_fp_input.o was compiled for kernel
version 2.4.31-dbox2
while this kernel is version 2.4.32-dbox2
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
insmod: A module named avia_av already exists
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
avia_gt_proc: $Id: avia_gt_proc.c,v 0.1.4 2006/04/16 Merandos/Skars/n772yk Exp $

avia_gt_proc: Description: GTX/eNX proc_dev Driver with proc_fs extension

OPTIONS:
(demux reinit) enx_reset=1
(framer chan.) fc_reset=0
(clr avia reg) avia=1
(enx td trace) trace=0
(lock, unlock) spinlock=1
Schreiben ueber avia_gt.o
(delay) delay=10

DBox2 Multicam Driver v1.01 skars & doz21 :)
[camd-cardserver.o] compiled Jan 23 2004, 16:38:42
[camd-cardserver.o] ioport base = ff000950
[camd-cardserver.o] commproc base = ff0009c0
insmod: Warning: kernel-module version mismatch
/var/etc/fmc/pcf8574.o was compiled for kernel version 2.4.31-dbox2
while this kernel is version 2.4.32-dbox2

[pcf8574.c]: Einlesen der Konfig [/var/etc/fmc/fmc_treiber.cfg]
[pcf8574.c]: Speichern der Konfig [/var/etc/fmc/fmc_treiber.cfg]
[pcf8574.c]: attach_adapter
insmod: A module named sunrpc already exists
insmod: A module named lockd already exists
insmod: A module named nfs already exists
insmod: A module named cifs already exists
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
/tmp/currentservices.xml: No such file or directory
[cinfo.socket] sucessfull created
$Id: controld.cpp,v 1.120 2006/06/09 18:14:47 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 0 v3 = 1 a3 = 1 fblk=1
[controld] setting VideoFormat to auto
[nhttpd] Neutrino HTTP-Server starting..
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Fette Engschrift/Regular)
[LCDFONT] Intializing font cache...
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[cryptinfo.socket] sucessfull created
[neutrino] initialized everything
rdate: time.fu-berlin.de: Host name lookup failure

Ein Frage hät ich noch kann es sein das sowas nur vom rum stehen passiert, ich bezweifel das langsam.
Hab die Box erst vor 2 Tagen von meiner Ex-Frau zurück bekommmen nach 1 1/2 Jahren streiten.

Gruß holodoc
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

DBox2 Multicam Driver v1.01 skars & doz21
[camd-cardserver.o] compiled Jan 23 2004, 16:38:42
[camd-cardserver.o] ioport base = ff000950
[camd-cardserver.o] commproc base = ff0009c0
Illegal
Bild
RN_Holodoc
Neugieriger
Neugieriger
Beiträge: 10
Registriert: Freitag 16. Juni 2006, 20:36

Beitrag von RN_Holodoc »

Hallo,

Hm!

Dann wird mir allerdings einiges klar.

Scheint eh das Netwek zu sein, weil das geht nicht mehr.

Kann man sowas reparieren?

Gruß holodoc
Liontamer
Klöppelliese
Beiträge: 1644
Registriert: Donnerstag 8. August 2002, 12:51

Beitrag von Liontamer »

1. Flash ein legales Image
2. Zieh das Nullmodemkabel von der dbox ab, dann sollte sie auch wieder booten.
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

Und damit ist hier geschlossen.
Bild