kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
over and over it comes...
can someone please help me out...
come on now...if you need more info ,let me know...
pleaseeeeee ok i added more info maybe wil help someone...
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-a0.f1.45.07.00.00-11
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.2, My IP 192.168.0.3
debug: Sending TFTP-request for file C/DBox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 200228
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Sep 15 2002 - 22:09:05)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-cd-4a
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.3
Filename 'C/DBox2/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FD2AD8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.3
Filename 'C/DBox2/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FD2AD8 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.3
Filename 'C/DBox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
########################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647340 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (Sinnlos98@ATHLON) (gcc version 3.2) #11 Sun Sep 15 22:09:2
0 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.2:C/DBox2/
cdkroot/ ip=192.168.0.3:192.168.0.2:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30788k available (1136k kernel code, 376k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:41
4aD-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.3, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.3, domain=, nis-domain=(none),
bootserver=192.168.0.2, rootserver=192.168.0.2, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.2
Looking up port of RPC 100005/1 on 192.168.0.2
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin