Häufige Bild- und Tonausfälle bei Premiere und Kabel Free

Beitrag von **Acxl** » Mittwoch 11. April 2007, 04:15

Ich habe seit kurzem das Problem mit meiner Nokia Box Kabel (AVIA 500), das in letzter Zeit ziemlich oft direkt nach dem Booten oder auch zwischendurch das Bild bei sämtlichen Premiere und Kabel Free - Sendern ausfällt, anstatt eines Tons kommt nur gelegentliches knacken.

Der EPG wird weiterhin angezeigt, die Box stürzt auch nicht ab oder Ähnliches. Sämtliche ARD- und ZDF-Sender sind auch weiterhin störungsfrei zu sehen und zu hören.

Passieren tut das seit dem JtG-Snapshot vom 18.03.2007, aktuell habe ich den Snapshot vom 10.04. installiert (mit gleichem Problem).

Nach einem Neustart der Box sind die Sender oft wieder zu sehen/hören, allerdings manchmal auch nicht.

Folgende UCodes benutze ich:
avia500v110, avia600vb022, ucode_b107, cam_01_02_105D

Ich hoffe Ihr könnt mir helfen!

Ich weiß nicht ob es hilft, aber hier noch der Bootlog:

Code: Alles auswählen

   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    694074 Bytes = 677.8 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.34.2-dbox2 (vom Jtg-Team)  (gcc version 3.4.6) #1 So 25. MÃƒÂ¤r 12:16:15 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30780k available (1180k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:14:6a:d2
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.5.0 (2007-03-28 20:53:08 CEST) multi-call binary
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38bb000
Probing IDE interface ide0...
hda: FUJITSU MHV2080AH, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=155061/16/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan  1 12:00:00 CET 1970
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
SGI XFS with no debug enabled
XFS mounting filesystem ide0(3,2)
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

/dev/ide/host0/bus0/target0/lun0/disc:
 setting drive write-caching to 1 (on)
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
 setting standby to 350 (illegal value)
 setting acoustic management to 128
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
 acoustic     =  0 (128=quiet ... 254=fast)
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is on
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timeThread] - 11.04.2007 04:09:10, tim: Wed Apr 11 04:09:10 2007
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
$Id: zapit.cpp,v 1.395 2007/03/17 21:34:22 houdini Exp $
[zapit] PMT update enabled
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices] /var/tuxbox/config/zapit/myservices.xml  found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 11 onid 85
/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1722
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[camd] no card is in slot #2
[camd] a card is in slot #1
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[camd] no card is in slot #2
[camd] a card is in slot #1
[yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by /bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[deutsch.locale] superfluous entry: flashupdate.currentdistribution
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
SPTS, queue 0 extended.
avia_gt_core: masking unhandled irq reg 1 bit 15
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
TuxTxt service started 68
TuxTxt running thread...(068)
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
Un-P## B
   ITypege (e:  4 Loa   Eifyiressx veg-Te.So 2n no): 8
zod limtdbcrem60
WTC: keeITC:my dy lo 307codeghmentrites)ies:)
M: 51fer t1024-cac(ordOnforx NEn Swacietetlivfs:oochs: bon 2 Hat (20c-con 2.c /dsionrive 80 i0x03: 2560: C SCCoadexash 00x10: Fo32-bid Qucet_0enabs onh00000der""FS (00 :0-0x80020out 0000ideoace:  all for UDP,tablP: Hlishx doux Nuashntedd ketart28 2ary
formE Revsumir PIOs=xx1 200$
ier.
ide:CPLD:DE iU MH at hda:da: : 15/819
Pa0/bu: $I 05:2:008xx  0
a
XF2)
16:3ost0ttinon)
/11/ egisViA dvb__bridar
 al vgemenavia_gt_dmx: queue 3 overflow (count: 1)

Beitrag von **MajorK** » Mittwoch 11. April 2007, 10:15

Ein Schuss ins Blaue:

Kann es sein, dass Du in den Einstellungen SPTS-Treibe laden auf "ein" und auch Dolby Digital default auf "ein" hast? Das funktioniert mit avia600_v22 nämlich nicht (und führt zu einem schwarzen Bildschirm...).

Major K.

Beitrag von **Acxl** » Mittwoch 11. April 2007, 11:23

Hmmm, SPTS-Treiber laden ist aktiviert, allerdings habe ich Dolby Digital default auf "aus". "In SPTS-Modus aufnehmen" ist ebenfalls eingeschaltet.

EDIT: Ich glaube die Lösung steht im Wiki:

Man verwendet den avia600vb22 mit deaktiviertem SPTS. In den Einstellungen der Aufnahme aktviert man SPTS während der Aufnahme (möglich für Direktstreaming und Streamingserver). Nun hat man im laufenden Betrieb der DBox2 seltener Probleme mit Ton/Bild, ein Umschalten des Tonkanals auf AC3 führt zu keinem schwarzen Bildschirm, im Movieplayer kann der AC3-Ton genutzt werden und es kann trotzdem beim Direktstreaming ein TS erstellt werden. Lediglich ein Umschalten auf AC3-Ton während einer Aufnahme führt zu einem schwarzen Bildschirm.

Ich habe es jetzt so wie angegeben eingestellt, dann müsste es ja klappen.

Beitrag von **Z80** » Mittwoch 11. April 2007, 12:07

Code: Alles auswählen

 Un-P## B 
   ITypege (e:  4 Loa   Eifyiressx veg-Te.So 2n no): 8 
zod limtdbcrem60 
WTC: keeITC:my dy lo 307codeghmentrites)ies:) 
M: 51fer t1024-cac(ordOnforx NEn Swacietetlivfs:oochs: bon 2 Hat (20c-con 2.c /dsionrive 80 i0x03: 2560: C SCCoadexash 00x10: Fo32-bid Qucet_0enabs onh00000der""FS (00 :0-0x80020out 0000ideoace:  all for UDP,tablP: Hlishx doux Nuashntedd ketart28 2ary 
formE Revsumir PIOs=xx1 200$ 
ier. 
ide:CPLD:DE iU MH at hda:da: : 15/819 
Pa0/bu: $I 05:2:008xx  0 
a 
XF2) 
16:3ost0ttinon) 
/11/ egisViA dvb__bridar 
 al vgemenavia_gt_dmx: queue 3 overflow (count: 1)

zum ende hin sieht das LOG plötzlich ziemlich übel aus.
wenn das ein frisch geflashtes image ist, schaut mir das sehr nach nem Hardware-Problem aus

schuat das log am ende des bootens immer so aus?
lösche mal testweise den ucode

Code: Alles auswählen

avia_gt_ucode: loaded ucode vB107

dann wird der interne verwendet 0014. ist aber mehr ein schuss ins "blaue".

Sämtliche ARD- und ZDF-Sender sind auch weiterhin störungsfrei zu sehen und zu hören.

das könnte u.U. auf einen defekten CAM-Chip (SEC) bzw. dessen RAM hindeuten.

Beitrag von **Acxl** » Mittwoch 11. April 2007, 12:28

Damit hätte ich jetzt ja nicht gerechnet!
Den ucode habe ich gelöscht und ein aktuelles Bootlog erstellt, ich glaube jetzt sieht's besser aus?!:

Code: Alles auswählen

Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 694138 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    694074 Bytes = 677.8 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.34.2-dbox2 (vom Jtg-Team)  (gcc version 3.4.6) #1 So 25. MÃƒÂ¤r 12:16:15 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30780k available (1180k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:14:6a:d2
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.5.0 (2007-03-28 20:53:08 CEST) multi-call binary
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: 0xc38bb000
Probing IDE interface ide0...
hda: FUJITSU MHV2080AH, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=155061/16/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2
Thu Jan  1 12:00:00 CET 1970
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
SGI XFS with no debug enabled
XFS mounting filesystem ide0(3,2)
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

/dev/ide/host0/bus0/target0/lun0/disc:
 setting drive write-caching to 1 (on)
 setting standby to 350 (illegal value)
 setting acoustic management to $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
128
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
 acoustic     =  0 (128=quiet ... 254=fast)
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
$Id: zapit.cpp,v 1.395 2007/03/17 21:34:22 houdini Exp $
[zapit] PMT update enabled
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices] /var/tuxbox/config/zapit/myservices.xml  found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 11 onid 85
/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1722
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[camd] no card is in slot #2
[camd] a card is in slot #1
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[camd] no card is in slot #2
[camd] a card is in slot #1
[yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by /bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[deutsch.locale] superfluous entry: flashupdate.currentdistribution
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
PES, queue 0 normal.
[camd] starting onid 0001 sid d17aavia_gt_core: masking unhandled irq reg 1 bit 15

[camd] set emm caid 1722 capid 1500
TuxTxt running thread...(a90)
TuxTxt service started a90
descramble onid: 0001 sid: d17a status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[sectionsd] getUTC: read: Connection timed out
[timeThread] - 11.04.2007 12:19:43, tim: Wed Apr 11 12:19:43 2007
[timeThread] Time set via DVB, going to sleep for 1800 seconds.