Kanal (zur zeit) nicht verfügbar

[XRay206]

Bei meiner Nokia D-Box2 Avia600 2xIntel
Bekomme immer die Meldung Kanal (zur zeit) nicht verfügbar was kann es da haben ist da der Tuner eventuell Kaputt?

Bei einen Sendersuchlauf findet er auch nichts

Gruss
Ray

[CarstenW]

Hast Du Deine gesicherten Datein drinne? Stimmt deine ?.xml Datei?

[XRay206]

Was meinst du mit gesicherten Daten?

Habe mal ein Bootlog erstellt hoffe ihr könnt mir weiter helfen!!!!



[controld] videoOutput off (mode=2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=0
[neutrino] Software upd
[neutrino] executing /var/tuxbox/config/standby.onrino] enable flash
[lcdd] t
[controld] SAAIOSMODE: Invalid argument
[controld] SAAIOSWSS: Invalid argumentusing default...
Ýdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPSfault...


debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-a4.38.80.07.00.00-a4
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loade

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 149536
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Dec 7 2006 - 12:37:28)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C:
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ........... .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 650877 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name:
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 650813 Bytes = 635.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (GLJ-Team@DBOX2) (gcc version 3.4.4) #4 Sa Apr 21 21:
03:42 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30864k available (1104k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:44:d3:8f
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.2.1 (2007.12.14-15:19+0000) multi-call route: SIOC[ADD
|DEL]RT: Network is unreachable
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
cam.c,v 1.31 13th of May satsuse
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter - GLJ-Team (JohnDoe,g5401) (C-Cube AViA GTX/eNX wit
h AViA 500/6
ves1x93: Detected ves1893a rev2
DVB: registering frontend - http://glj.6x.to 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning..
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54
avia_gt_gv: set_input_mode (mode=2)
[neutrino]
avia_gt_gv: set_input_size (width=720, height=576)
[controld]:
avia_gt_gv: set_input_mode (mode=2)= 1 v3 = 0 a3 = 1 fblk=0
avia_gt_gv: set_input_size (width=720, height=576)
[controld] SAAIOSMODE: Invalid argument
avia_gt_gv: set_input_mode (mode=2)
[controld] SAAIOSWSS: Invalid ar
avia_gt_gv: set_input_size (width=720, height=576): DDF: Calibrating delay loop... debug: DDF: 67.79
Console: switching to colour frame buffer device 82x32
debug: BMon V1.2 mID 01
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
debug: fpID 5a dsID 01-a4.38.80.07.00.00-a4
lcd.o: init lcd driver module
debug: HWrev 09 FP
lcd.o: found KS0713/SED153X lcd interface B/Ex/Fl(MB) 32/00/08
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exug:
BOOTP/TFTP bootstrap lo
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $Flash-FS
de
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $800000, size= 149536
ve
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $oot 1.1.4 (Tuxbox) (Dec 7 2006 - 12:37:28)
avia_gt_proc: Using config file '/var/tuxbox/config/avia.conf'. 1 kB D-Cache


avia_gt_proc: $Id: avia_gt_proc.c,v 0.92d 2003/06/18 19:00:00 bof
Watchdog enabled
I2C:

Options:
1: Cons
grep: /var/keys/camd3.config: No such file or directory
3: Console on framebuffer
rm: cannot remove `/var/etc/.slot0_start': No such file or directory 0
.............
grep: /var/keys/camd3.config: No such file or directory
grep: /var/keys/camd3.config: No such file or directory (jffs2) loading 'vmlinuz' to 0x100000
rm: cannot remove `/var/etc/.slot1_start': No such file or directory to 0x100000
##
grep: /var/keys/camd3.config: No such file or di
Image Name:
grep: /var/keys/gbox_cfg: No such file or directory
Console: colour dummy d
rm: cannot remove `/var/etc/.slot_multi': No such file or directory... 66.96 BogoMIPS
Memory:
rm: cannot remove `/var/etc/.com_betad': No such file or directorym)
rm: cannot remove `/var/etc/.multi_betad': No such file or directorybytes)

[CBasicClient] connect failed. 2048 (order: 2, 16384 bytes)
/tmp/sectionsd.sock: No such file or directory
Mount cache hash table entries: 5
$Id: zapit.cpp,v 1.4 2007/12/16 13:26:10, patched by GLJ-Team (JohnDoe) Exp $
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
[zapit] PMT update enabled

devfs: v1.12c
[getservices]: removing 'KIOSQUE' (service_id=0x20de): FAILED!
devfs: boot_opti
[getservices]: replacing 'TAQUILLA XXX' (service_id=0x756a): FAILED!003 Red Hat, Inc.
/tmp/currentservices.xml: No such file or directory30)
$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $6.1 (20010830)

[controld] Boxtype detected: (1, Nokia D-Bsion 0.04

[camd] CA_SEND_MSG: Remote I/O errorflash memory: Found 2 x16 devices at
[camd] CA_SEND_MSG: Remote I/O error
[CBasicClient] connect failed. Query Table at 0x0035
/tmp/sectionsd.sock: No such file or directory0001: Erase suspend on write enabled
[nhttpd] Neutrino HTTP-Server starting......Patched GLJ-Team (JohnDoe)ox 2 flash memory":
[LCDFONT] initializing core...ootloader"
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
0x00040000-0x00800000 : "var (JFFS2)"
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
0x00000000-0x00800
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)eo capture interface: v1.00
mice: P
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
IP Protocols: ICMP, UDP, TCP
[basicsocket] send_data: Resource temporarily unavailableets, 4Kbytes
$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $d 4096)
[sectionsd] Caching max 2500 events0/SMP for Linux NET4.0.
[sectionsd] Caching 1 days
VFS: Mounted
[sectionsd] Events are old 60min af

Detected STB:
[basicsocket] send_data: Resource temporarily unavailablel: D-BOX2
[i2c-8xx]: mpc 8xx i2c ini
[basicsocket] send_data: Resource temporarily unavailable
cam.c,v 1.31 13th of May satsuse
/tmp/neutrino: /lib/libpng12.so.0: no version information available (required by
DVB: registering new adapter - G
/tmp/neutrino),g5401) (C-Cube
[neutrino] frameBuffer Instance created
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 18 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
zap failed!

[PT-1]

UNERWÜNSCHTER INHALT, Anm. d. Forenbetreibers <-- Warum ?