Kein Booten / Abstürze

Boxenweitwurf
BenS
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Freitag 4. Juli 2008, 12:23

Kein Booten / Abstürze

Beitrag von BenS »

Hi !

Ich habe Probleme mit meiner Phillips-Kabel-Box.
Nachdem sie im laufenden Betrieb abgestürzt war, brauchte sie nun mehrere Anläufe um überhaupt noch zu starten.
Hatte sie es dann geschafft blieb sie nicht lange stabil und reagierte auf keine Kommandos mehr.
Ein neues Image aufspielen habe ich mühsam geschafft, da dies auch mittels seriellem Kabel nicht sofort möglich war (Absturz beim Löschen des FLASH)
Nachdem das neue Image aufgespielt war, lief sie zwei Tage stabil, bis der nächste Absturz mit den oben beschriebenen Folgeerscheinungen auftrat.

Hier mal das Boot-Log

Code: Alles auswählen

ûûûûûûûdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

















debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-eb.86.1b.07.00.00-6d
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-eb.86.1b.07.00.00-6d
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-eb.86.1b.07.00.00-6d
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036


will verify ELF image, start= 0x800000, size= 172392
verify sig: 262
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox) (Oct  3 2008 - 20:41:44)

CPU:   PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS:   .  | / - \ |  done.

env: found "console"
env: found "baudrate"
env: found "dbox_duplex"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  1  0 
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 689373 bytes loaded to 0x100000
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    689309 Bytes = 673.2 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.36.7-dbox2 (vom Jtg-Team)  (gcc version 3.4.6) #1 Fr 3. Okt 20:42:13 CEST 2008

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=0

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30788k available (1172k kernel code, 348k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:58:0f

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

 Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x006a0000 : "root (SquashFS_LZMA)"

0x006a0000-0x00800000 : "var (JFFS2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init


init started: BusyBox v1.12.1 (2008-10-03 20:40:51 CEST)
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av: AVIA500 sptsfix is off

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

jtginfo $Id: jtginfo.c,v 2.0 2008/04/16 22:16:44 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

DVB: VES1820(0): pwm=0x48

DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Thu Jan  1 12:00:00 CET 1970
$Id: sectionsd.cpp,v 1.266 2008/09/30 21:37:22 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
$Id: zapit.cpp,v 1.410 2008/04/25 21:23:23 houdini Exp $
[frontend] uncommitted_switch_mode 0
avia_gt_core: masking unhandled irq reg 0 bit 7

/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1722
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 16:9
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-eb.86.1b.07.00.00-6d
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036


will verify ELF image, start= 0x800000, size= 172392
verify sig: 262
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox) (Oct  3 2008 - 20:41:44)

CPU:   PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS:   .  | / - \ |  done.

NIP: 01FEA34C XER: 20000000 LR: 01FEA33C REGS: 01fa7cf0 TRAP: 0600 DAR: 00000001
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00000000 01FA7DE0 01FA7F8C 01FAC010 01FF1CFE 0000000A 01FAE048 FFFFFFFF 
GPR08: 01FFCA44 FF002811 106A0000 FF0011C8 00000000 00031B58 01FFAD00 01F8C000 
GPR16: 00000000 00000000 1007CD50 1007CD5C 8000C000 00000001 00000000 C0002AA8 
GPR24: 00100000 0002C62C 01FA7F68 01FAC010 01FA7FC4 01FA7FC4 01FFBBF4 01FF1CFE 
Call backtrace: 
01FEA33C 01FDC81C 01FE2C48 01FE0474 01FD4CA0 01FCE3B0 
Alignment Exception

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-eb.86.1b.07.00.00-6d
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036


will verify ELF image, start= 0x800000, size= 172392
verify sig: 262
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox) (Oct  3 2008 - 20:41:44)

CPU:   PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS:   .  NIP: 00001020 XER: 00000000 LR: 00000290 REGS: 01fa7bc0 TRAP: 1000 DAR: 81FF3BF4
MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00

GPR00: 01FE9BFC 01FA7CB0 01FA7F8C 01FA7CC0 106AB404 00000003 01FAE048 01FAE040 
GPR08: 01FFCA44 00000070 01FAE298 01FAE290 00000000 00031B58 01FFAD00 01F8C000 
GPR16: 00000000 00000000 1007CD50 1007CD5C 00001002 01FA7BB0 00040000 00001002 
GPR24: 0015FFBC 01FAC010 00000000 00000035 01FF40F4 8000B474 81FFBBF4 106AB404 
Call backtrace: 
01FA7CD0 
Software Emulation Exception

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-eb.86.1b.07.00.00-6d
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036


will verify ELF image, start= 0x800000, size= 172392
verify sig: 262
Branching to 0x40000


U-Boot 1.3.4 (Tuxbox) (Oct  3 2008 - 20:41:44)

CPU:   PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS:   .  | / - \ |  done.

env: found "console"
env: found "baudrate"
env: found "dbox_duplex"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  1  0 
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 689373 bytes loaded to 0x100000
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    689309 Bytes = 673.2 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.36.7-dbox2 (vom Jtg-Team)  (gcc version 3.4.6) #1 Fr 3. Okt 20:42:13 CEST 2008

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=0

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30788k available (1172k kernel code, 348k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:58:0f

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

 Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x006a0000 : "root (SquashFS_LZMA)"

0x006a0000-0x00800000 : "var (JFFS2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init


init started: BusyBox v1.12.1 (2008-10-03 20:40:51 CEST)
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av: AVIA500 sptsfix is off

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

jtginfo $Id: jtginfo.c,v 2.0 2008/04/16 22:16:44 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

DVB: VES1820(0): pwm=0x48

DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Thu Jan  1 12:00:00 CET 1970
$Id: sectionsd.cpp,v 1.266 2008/09/30 21:37:22 seife Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
$Id: zapit.cpp,v 1.410 2008/04/25 21:23:23 houdini Exp $
[frontend] uncommitted_switch_mode 0
avia_gt_core: masking unhandled irq reg 0 bit 7

/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1722
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 16:9
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
imageinfo: JTG-Image [IDE] (2.3.1)
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[controld] format: 16:9
[neutrino] initialized everything
PES, queue 0 normal.

avia_gt_core: masking unhandled irq reg 1 bit 15

[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[timeThread] - 19.12.2008 19:36:08, tim: Fri Dec 19 19:36:08 2008
12:00:25.772 dmxSDT: going to sleep...
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
19:36:08.017 dmxCN: going to sleep...
19:36:08.110 eit_set_update_filter, servicekey = 0x43700016d66, current version 14
[sectionsd] DMX::readNbytes read: Bad address
Bad emulation sectionsd/114

 NIP: 31392e30 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0

 pte @ 0x31392e30:  (0xc1c6f310)->(0xc16e4e48)->0x0013f889

 RPN: 0013f PP: 2 SPS: 1 SH: 0 CI: 0 v: 1

Kernel VA for NIP 0xc013fe30  pte @ 0xc013fe30: no pmd

Oops: kernel access of bad area, sig: 11

NIP: 80000000 XER: 80000000 LR: C39061C0 SP: C16E1A10 REGS: c16e1960 TRAP: 0400    Not tainted

MSR: 40009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11

TASK = c16e0000[114] 'sectionsd' Last syscall: 158 

last math 00000000 last altivec 00000000

GPR00: 80000000 C16E1A10 C16E0000 C390E9E8 C3B97000 00128000 C3B977C0 6C657320 

GPR08: C1FFE890 000056A8 0012D6A8 00000005 55003099 9005C360 00000000 30019894 

GPR16: 30019554 00000000 1001858C 00000004 00001032 016E1AC0 00000000 C0002AA0 

GPR24: C3910000 C3910000 C390E504 C0160000 00000000 000055EC C390E9DC 00000003 

Call backtrace: 

C3906098 C3900244 C0003A9C C0003BA0 C0002AA0 C3B94000 C38D04F4 

C38D06A8 C3B8D7F0 C39067DC C00149DC C00169B4 C001507C C0014EE4 

C0014AA0 C0003C24 C0002AA0 C0006370 C0002ADC 31392E31 

Kernel panic: Aiee, killing interrupt handler!

In interrupt handler - not syncing

 <0>Rebooting in 180 seconds..Machine check in kernel mode.

Caused by (from SRR1=1032): Transfer error ack signal

Oops: machine check, sig: 7

NIP: C38DD718 XER: A0000000 LR: C38DD700 SP: C16E1760 REGS: c16e16b0 TRAP: 0200    Not tainted

MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11

TASK = c16e0000[114] 'sectionsd' Last syscall: 158 

last math 00000000 last altivec 00000000

GPR00: 00FF00FF C16E1760 C16E0000 C3C15000 C0140C3C C3C15000 C187144C FDFFE000 

GPR08: C18718E0 80F000F0 C1871580 C3C15000 59009095 9005C360 00000000 30019894 

GPR16: 30019554 00000000 1001858C 00000004 00009032 016E1950 00000000 C0002AA8 

GPR24: 00000000 0000000B 40000000 C0150000 001CFDE0 FFFFFFFF C0129DC0 0000000B 

Call backtrace: 

C38DD700 C00080C8 C000F354 C00131FC C0002C34 C0009940 C0009CD0 

C0002AA8 C3906098 C3900244 C0003A9C C0003BA0 C0002AA0 C3B94000 

C38D04F4 C38D06A8 C3B8D7F0 C39067DC C00149DC C00169B4 C001507C 

C0014EE4 C0014AA0 C0003C24 C0002AA0 C0006370 C0002ADC 31392E31 

Oops: kernel access of bad area, sig: 11

NIP: C00094A4 XER: A0000000 LR: C0003B40 SP: C16E1570 REGS: c16e14c0 TRAP: 0300    Not tainted

MSR: 80001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11

DAR: D0162028, DSISR: C0000000

TASK = c16e0000[114] 'sectionsd' Last syscall: 158 

last math 00000000 last altivec 00000000

GPR00: 00000001 C16E1570 C16E0000 0000001E 00000000 C16E15D0 FFFFE404 C014CF63 GPR-2147483640: 10000000 40000000 00000000 C0162028 55009099 9005C360 00000000 30019894 GPR-2147483632: 30019554 00000000 1001858C 00000004 00001032 016E15C0 00000000 C0002AA0 GPR-2147483624: C0003B64 0000000B C016285C C01526F0 C16E15D0 80000001 00000000 00000000 GPR-2147483616: C00094A4 80001032 00002404 C000957C                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            à
Bin für jede Hilfe dankbar.
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: Kein Booten / Abstürze

Beitrag von seife »

Eine Philips Kabel Box ist auf jeden Fall eine Entwicklerbox, offiziell gab es die nie.
Dann noch mit GTX und nicht eNX - das ist sehr seltsam.

Der ständig resettende Watchdog deutet auf einen Hardwareschaden hin, aber da es kaum Erfahrungen mit diesen Philips-Exoten gibt, wird es vermutlich schwierig, die zu reparieren. Genaues können dir da aber nur die Hardwarespezis sagen.
dietmarw
Contributor
Beiträge: 1833
Registriert: Mittwoch 10. April 2002, 15:39

Re: Kein Booten / Abstürze

Beitrag von dietmarw »

seife hat geschrieben:Eine Philips Kabel Box ist auf jeden Fall eine Entwicklerbox, offiziell gab es die nie...
also finden tut er was anderes..
[controld] Boxtype detected: (1, Nokia D-BOX2)
seife
Developer
Beiträge: 4189
Registriert: Sonntag 2. November 2003, 12:36

Re: Kein Booten / Abstürze

Beitrag von seife »

Deswegen ist es ja so seltsam: er hat eine Philips Kabel Box, die sich für eine Nokia hält.
BenS
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Freitag 4. Juli 2008, 12:23

Re: Kein Booten / Abstürze

Beitrag von BenS »

Oh, mann...
Sorry !
Natürlich ist es eine NOKIA und keine Phillips.
Ich hab keine Ahnung wie ich darauf kam...
Stingray
Erleuchteter
Erleuchteter
Beiträge: 453
Registriert: Mittwoch 27. Juni 2007, 15:25

Re: Kein Booten / Abstürze

Beitrag von Stingray »

Das Log sieht nach nem defekten Prozessor aus.

Gruß Basti
dietmarw
Contributor
Beiträge: 1833
Registriert: Mittwoch 10. April 2002, 15:39

Re: Kein Booten / Abstürze

Beitrag von dietmarw »

Stingray hat geschrieben:Das Log sieht nach nem defekten Prozessor aus.
da es zwischenzeitlich auch mal wieder lief, würde ich eher kalte lötstellen vermuten..
BenS
Neugieriger
Neugieriger
Beiträge: 7
Registriert: Freitag 4. Juli 2008, 12:23

Re: Kein Booten / Abstürze

Beitrag von BenS »

Zuerst mal danke für die Antworten.

Ich vermute inzwischen auch sehr stark kalte Lötstellen.
Ich hatte die Box auseinandergebaut und die Platine optisch konrolliert, dabei aber keine Auffälligkeiten gefunden.
Die Prozessorlötstellen waren so natürlich nicht zu kontrollieren.
Nachdem ich sie wieder zusammengabaut hatte, blieb sie beim Booten erneut hängen, allerdings half sanfter Druck auf den Prozessor.
Seitdem läuft alles wieder ohne Probleme. Frägt sich nur wie lange....