IpBox350 enigma

[cocoon]

Hallo guten Morgen zusammen,

ich stehe vor einem kleinen Problem und komm nicht wirklich weiter, ich hoffe das ich hier im richtigen Bereich für meine Frage bin.
Zu meinem Problem, ich habe versucht nach newmake ein org. image für die IP350 durchlaufen zu lassen, das ist auch soweit ich das sehen kann ohne Fehler passiert, allerdings passiert beim Flashen folgendes:

Code: Alles auswählen

checking received image...
hardware model is not mine.(got 0x00020000,expected 0x00021000)
Maybe you transferred wrong file.
My hardware model  : 00021000
My hardware version: 00010000
Select another file.

kann mir da ev. jemand weiterhelfen?


grüsse cocoon

[Grabber66]

Flash mal ein anderes Enigma, oder Neutrino. Und dann installiert du das flash_image_noboot über die GUI bzw. das webif.
Du versuchst es denke ich seriell, und da prüft die software den loader, und der ist aus dem CVS anders als im original.

[cocoon]

Flash mal ein anderes Enigma, oder Neutrino. Und dann installiert du das flash_image_noboot über die GUI bzw. das webif.
Du versuchst es denke ich seriell, und da prüft die software den loader, und der ist aus dem CVS anders als im original.

Ja sehr schön, danke für den hinweis, so funktioniert es, gibts da auch ne möglichkeit das seriell flashbar zumachen?


edit: es bootet leider nicht durch, hast du auch schon mal eins für die ip gemacht? ev kennst du ja den fehler

## Booting image at ff840000 ...
Image Name: Linux Kernel Image
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1055438 Bytes = 1 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.6.17-cubecafe-prime (bosmann@bosmann) (gcc version 3.4.6) #1 Sun Jan 30 15:22:55 CET 2011
relook210 (CubeCaFe-prime) DGStation Co. http://www.dgstation.co.kr
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 panic=1 videofmt=pal
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 30144k available (1680k kernel code, 548k data, 84k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
squashfs: version 3.1 + autolzma (2006/10/05) Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered (default)
IBM GPIO driver version 07.25.02
IBM GPIO driver version 07.25.02
GPIO #0 at 0xc305e000
Serial: 8250/16550 driver $Revision: 1.90 $ 3 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 20) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 21) is a 16550A
serial8250: ttyS2 at MMIO 0x0 (irq = 22) is a 16550A
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
dm9000 Ethernet Driver
dm9000: 16 bit io datasize.
dm9000: Invalid ethernet MAC address feched from srom, tring bios
eth0: dm9000 at c3060000,c3062004 IRQ 26 MAC: 00:13:18:01:db:fb
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
IBM Redwood 4/6 IDE driver version 2.1 S
detected IOADDR: f2000000/f4000000
DMA addr: fce00000
using irq 25
hda: probing with STATUS(0x50) instead of ALTSTATUS(0x55)
hda: ST340823A, ATA DISK drive
hdb: probing with STATUS(0x00) instead of ALTSTATUS(0xa5)
hdb: probing with STATUS(0x00) instead of ALTSTATUS(0xa5)
hda: use pio mode 4
ide0 at 0xc3064000-0xc3064007,0xc3066000 on irq 25
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/1024KiB Cache, CHS=65535/16/63, (U)DMA
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1
relook: flash mapping: 800000 at ff800000
DGStation relook210: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 9 MTD partitions on "DGStation relook210":
0x00000000-0x00040000 : "nor.config_welcome"
0x00600000-0x007d0000 : "nor.db"
0x001a0000-0x00600000 : "nor.root"
0x00040000-0x001a0000 : "nor.kernel"
0x007d0000-0x00800000 : "nor.boot"
0x00040000-0x00600000 : "nor.kernel_root"
0x00040000-0x007d0000 : "nor.kernel_root_db"
0x00000000-0x007d0000 : "nor.all_noboot"
0x00000000-0x00800000 : "nor.all"
i2c /dev entries driver
IBM IIC driver v2.1
ibm-iic0: using standard (100 kHz) mode
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
SQUASHFS error: zlib_fs returned unexpected result 0xfffffffd
SQUASHFS error: zlib_fs Failed!! trying to lzma

VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 84k init

init started: BusyBox v1.17.3 (2011-01-31 08:08:54 CET)

starting pid 12, tty '': '/etc/init.d/sysinit'

can't run '/etc/init.d/sysinit': No such file or directory

starting pid 13, tty '': '/etc/init.d/rcS'

Please press Enter to activate this console. CubeCaFe prime 350 driverset for stb2500 ver 1.3.2 (Mar 21 2008 - 02:51:53) build 37
[PLATMAN] started!
Adding 25204k swap on /dev/mtdblock/9. Priority:-1 extents:1 across:25204k
To unload this module launch : swapoff /dev/mtdblock/9
[FP] Found a CubeCaFe Prime
micom access driver $Revision: 1.1 $
input: Dreambox IR Keyboard as /class/input/input0
[FP] Ver. 7.4.24(1)
Micom version Ver 07 04 24
res: 0
[NIM] Found stv0288 based demod
insmod: can't insert '/lib/modules/2.6.17-cubecafe-prime/extra/head.ko': invalid module format
ifup: ignoring unknown interface eth0
/etc/init.d/rcS: line 121: /bin/rcremap: not found
/etc/init.d/start: .: line 6: out of file descriptors

[rhabarber1848]

Bitte diesen Patch testen: EDIT: committed to CVS

[Grabber66]

Also da hängt es:

Code: Alles auswählen

insmod: can't insert '/lib/modules/2.6.17-cubecafe-prime/extra/head.ko': invalid module format
ifup: ignoring unknown interface eth0
/etc/init.d/rcS: line 121: /bin/rcremap: not found
/etc/init.d/start: .: line 6: out of file descriptors

Hab schon seid etlichen Monaten kein Image mehr für die Prime gebaut. Und davor auch nur Neutrino

Aber irgentwie wird der head.ko treiber nicht geladen, und in der /etc/init.d/start scheint ein fehler zu sein.

[bosmann]

probiere auch so ein image zu erstellen, bei mir kommt:

Code: Alles auswählen

WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbc0)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbc4)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbc8)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbcc)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbd0)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbd4)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbd8)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbdc)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbe0)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbe4)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbe8)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbec)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbf0)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xbf8)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc00)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc08)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc10)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc14)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc18)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc1c)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc20)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc28)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc30)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc38)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc40)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc44)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc48)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from __ex_table after '' (at offset 0xc4c)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from .fixup after '' (at offset 0x10c)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .init.text: from .fixup after '' (at offset 0x114)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc50)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc54)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc58)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc5c)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc60)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc64)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc68)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc6c)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc70)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc74)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc78)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc7c)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc80)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc84)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc88)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc8c)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc90)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc94)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc98)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xc9c)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xca0)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xca4)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xca8)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xcac)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xcb0)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xcb4)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xcb8)
WARNING: drivers/mmc/wbsd.o - Section mismatch: reference to .exit.text: from __ex_table after '' (at offset 0xcbc)
WARNING: "request_dma" [drivers/mmc/wbsd.ko] undefined!
WARNING: "free_dma" [drivers/mmc/wbsd.ko] undefined!
make[1]: Leaving directory `/home/bosmann/newmake/ipbox-cvs/cdk/linux-2.6.17'
/usr/bin/install -c -m644 linux-2.6.17/vmlinux /home/bosmann/newmake/ipbox-cvs/root/cdkflash/vmlinux
make -C linux-2.6.17 modules_install \
		ARCH=ppc CROSS_COMPILE=powerpc-tuxbox-linux-gnu- \
		INSTALL_MOD_PATH=/home/bosmann/newmake/ipbox-cvs/root/cdkflash/vmlinux
make[1]: Entering directory `/home/bosmann/newmake/ipbox-cvs/cdk/linux-2.6.17'
mkdir: kann Verzeichnis „/home/bosmann/newmake/ipbox-cvs/root/cdkflash/vmlinux“ nicht anlegen: Ist kein Verzeichnis
make[1]: *** [_modinst_] Fehler 1
make[1]: Leaving directory `/home/bosmann/newmake/ipbox-cvs/cdk/linux-2.6.17'
make: *** [/home/bosmann/newmake/ipbox-cvs/root/cdkflash/vmlinux] Fehler 2
make: *** Datei »/home/bosmann/newmake/ipbox-cvs/root/cdkflash/vmlinux« wird gelöscht

[cocoon]

hi, hab jetzt alles noch mal neu laufen lassen, incl diff, es gab zwar keine fehlermeldung, aber habe nun das 8.8.8.8 problem

ei ich glaub ich hab kein glückliches händchen im e1 ;(

[bosmann]

was heißt "8.8.8.8 problem" ?

[Grabber66]

8888 ist bei der Box ein Fehlercode, das der bootloader schrott ist, und per jtag-kabel wieder eingespielt werden muss.

[bosmann]

sowas...!?
cocoon: hast du das .diff vom rhabarber eingespielt?

[cocoon]

jepp hab ich, wie oben geschrieben

[bosmann]

ich habe auch ein image mit dem .diff erstellt und wollte auf der box eines kumpels testen.
dann kam auch 8.8.8.8 und die box tut nix mehr...weiß jemand woran es liegen kann??

[cocoon]

keine ahnung woran das liegen könnte, aber mich hat auch ihrgentwie der drang verlassen weiter zu testen, ev doch noch mal den alten weg über den dreamboxbranch versuchen, ich hab nur keine lust noch mehr boxen ab zu schiessen, meine reicht ev ändert der diff zwar das boxmodel problem, aber ev passt ja noch was anderes nicht richtig. @bosmann das wird das gleich sein wie bei meiner büchse, da wird er leider um jtag nicht herumkommen