Well ... my problem look like this:
Sagem is in debug mode .... but when i try to flash image i have next in terminal winow:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-ec.1f.ba.07.00.00-8a
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.23
debug: Sending TFTP-request for file C/DBox2/Software/Yadd/tftpboot/ppcboot_ram_
fix
will verify ELF image, start= 0x800000, size= 223527
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Dec 10 2001 - 19:28:19)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-32-35-51
FLASH: 8 MB
LCD driver (KS0713) initialized
Bus Fault @ 0x01fdaad0, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fa30 Unknown values in msr
NIP: 01FDAAD0 XER: A000FF7F LR: 01FD2DC8 REGS: 01f9fa30 TRAP: 0200 DAR: 0DB42EF1
MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00
GPR00: 0000006C 01F9FB20 00000000 144D8E6C 01FE0B60 00000020 01F9FF10 01F9FF14
GPR08: 01FD92F4 044B8E68 FF002808 00000000 00000000 000328A4 01FE3600 01F80000
GPR16: 00000000 00000000 00000000 00000000 20004000 00000001 60634001 00002580
GPR24: FF002FC0 01F9FF14 01F9FF10 01FE0B60 FFFFFFFF 10020000 144D8E68 044B8E68
Call backtrace:
3DF01FF0 01FD6BA4 01FCC5B4 01FC23B0
machine check
### ERROR ### Please RESET the board ###
... and reset continue ...
what is problem ???
Thanks
