several days ago my nokia dbox 2 began to take several minutes to start up. 3 days ago that increased to over an hour. the past two days it will not boot (start) at all. i left the box on for 6 hours and it just goes laden..the window display shows it is trying to boot but it no longer does. it use to display the BN2.00uns software in the window display, it 'NO' longer displays this. it seems like the software has been lost and goes thru the gestartet process but it never does start. after awhile it says something about nichts korrekt and hit 'OK' to begin akualization again. when i enter OK the whole process begins again. is my machine completely kaput or is it possible to download new software thru the RS232 kabel? if so, where can i get this software and how do i do it. any help will be greatly appreciated, be it english (preferred) or deutsch (i'll somehow get it translated)
vielen dank......
terry
nokiadbox-2 no longer boots and no longer displays BN2.00uns
-
- Beiträge: 2
- Registriert: Dienstag 16. April 2002, 10:40
-
- Erleuchteter
- Beiträge: 774
- Registriert: Donnerstag 31. Januar 2002, 16:25
your box is looping,
so you have to bring your box into the debug. When it is in debug you can reflash your box over your network.
when you say me, which operating system (on the computer) you use, i will try to translate the howto.
or if you want to do it all on your own.
read this
http://www.noernet.de/dbox2/howto/DBox2-HOWTO-2.html
read this or better let it translate
http://www.bohntv.de/faq.htm#DVB2000
it starts to be interisting for you at the point "erste Schritte"
so you have to bring your box into the debug. When it is in debug you can reflash your box over your network.
when you say me, which operating system (on the computer) you use, i will try to translate the howto.
or if you want to do it all on your own.
read this
http://www.noernet.de/dbox2/howto/DBox2-HOWTO-2.html
display BN2.00uns is normally the bootloader of a d-box1 if it`s a d-box 1terry hat geschrieben:display the BN2.00uns
read this or better let it translate

http://www.bohntv.de/faq.htm#DVB2000
it starts to be interisting for you at the point "erste Schritte"
-
- Erleuchteter
- Beiträge: 774
- Registriert: Donnerstag 31. Januar 2002, 16:25
I think you don`t have an original - image to reflash. If you have or find one, you can rescue your BetaResearch
software (post if you got it). Otherwhile you will have to flash Linux in your box
(in my opinion it`s the what can happen to the Box)
you also need Ucodes. This you need both ways
don`t ask me i don`t have it. and don`t ask here because it`s (c)
1. you have to download the bootmanager at http://dbox.feldtech.com
2. then you have to download the minflsh.tar.gz or.zip
don`t ask me i don`t have it. and don`t ask here because it`s (c)
3. then you have to unzip to the directory C:\miniflsh\
4. you need the file tuner.so. move this file to the directory \minflsh\root\platform\drv
rename it to flash.so (overwrite the old one)
5. switch on Bootp C.\minflsh\kernel\os
6. NFS on. NFS-Root is c:\minflsh\
7. switch on rarp.
8. now start. and start your dbox. box would have to boot from \minflsh\kernel\os. in the rsh terminal the
the command "help" will work.
9. execute script "enable_debug_mit_miniflash.txt"
10. in the com terminal have to come this
DebugEnabler (c) tmbinc, gillem +(sagem,amd,philips) 1.6final
bl-version : 1.2
product? at : 10000xxx
current state : tmb-locked
flashrom type : 2x16 bit? no, 1x16 bit? yes. vendor: INTEL
unprotecting : xxxxx - OK!
flashing NOW : xxxxx - Done
Please reset now!
if it looks this way
DebugEnabler (c) tmbinc, gillem +(sagem,amd,philips) 1.6final
bl-version : 1.2
product? at : 10000xxx
current state : tmb-locked
flashrom type : 2x16 bit? no, 1x16 bit? yes. vendor: INTEL
unprotecting : xxxxx - OK!
flashing NOW : xxxxx - FAILED
your write - protection was NOT enabled.
then the box is in debug-mode
Howto disable write protection look here.
http://www.noernet.de/dbox2/howto/nokia ... H4_XH6.jpg
or if you don`t this box look
here
http://www.noernet.de/dbox2/howto/nokia_2xAMD_XH3.jpg
if you don`t anything or anything will not work
post and i`will see how I can help you
Links you can read too (translate)
http://www.noernet.de/dbox2/howto/DBox2-HOWTO-2.html
look into the readme of the d-box Bootmanager
PS sorry for my bad english
software (post if you got it). Otherwhile you will have to flash Linux in your box
(in my opinion it`s the what can happen to the Box)
you also need Ucodes. This you need both ways
don`t ask me i don`t have it. and don`t ask here because it`s (c)
1. you have to download the bootmanager at http://dbox.feldtech.com
2. then you have to download the minflsh.tar.gz or.zip
don`t ask me i don`t have it. and don`t ask here because it`s (c)
3. then you have to unzip to the directory C:\miniflsh\
4. you need the file tuner.so. move this file to the directory \minflsh\root\platform\drv
rename it to flash.so (overwrite the old one)
5. switch on Bootp C.\minflsh\kernel\os
6. NFS on. NFS-Root is c:\minflsh\
7. switch on rarp.
8. now start. and start your dbox. box would have to boot from \minflsh\kernel\os. in the rsh terminal the
the command "help" will work.
9. execute script "enable_debug_mit_miniflash.txt"
10. in the com terminal have to come this
DebugEnabler (c) tmbinc, gillem +(sagem,amd,philips) 1.6final
bl-version : 1.2
product? at : 10000xxx
current state : tmb-locked
flashrom type : 2x16 bit? no, 1x16 bit? yes. vendor: INTEL
unprotecting : xxxxx - OK!
flashing NOW : xxxxx - Done
Please reset now!
if it looks this way
DebugEnabler (c) tmbinc, gillem +(sagem,amd,philips) 1.6final
bl-version : 1.2
product? at : 10000xxx
current state : tmb-locked
flashrom type : 2x16 bit? no, 1x16 bit? yes. vendor: INTEL
unprotecting : xxxxx - OK!
flashing NOW : xxxxx - FAILED
your write - protection was NOT enabled.
then the box is in debug-mode
Howto disable write protection look here.
http://www.noernet.de/dbox2/howto/nokia ... H4_XH6.jpg
or if you don`t this box look
here
http://www.noernet.de/dbox2/howto/nokia_2xAMD_XH3.jpg
if you don`t anything or anything will not work
post and i`will see how I can help you
Links you can read too (translate)
http://www.noernet.de/dbox2/howto/DBox2-HOWTO-2.html
look into the readme of the d-box Bootmanager
PS sorry for my bad english

-
- Neugieriger
- Beiträge: 13
- Registriert: Sonntag 17. Februar 2002, 16:29
-
- Erleuchteter
- Beiträge: 774
- Registriert: Donnerstag 31. Januar 2002, 16:25
-
- Neugieriger
- Beiträge: 13
- Registriert: Sonntag 17. Februar 2002, 16:29
-
- Beiträge: 1
- Registriert: Montag 15. April 2002, 13:57
This is a Dbox2 Forum not a Dbox1 Forum
If you have a bootloader with the Name 2.0UNS you have a Dbox1 in Use
Also ich denke mal der nette Mensch hat da eine Dbox1 am Wickel, oder habt Ihr einen neuen Bootloader entwickelt
?
So long
aera52
Also ich denke mal der nette Mensch hat da eine Dbox1 am Wickel, oder habt Ihr einen neuen Bootloader entwickelt

So long
aera52
Wer will denn schon wieder das Original zurück flashen???