Tach Zusammen, meine DBox2 mit 2Intel ist bereits im Debug, soweit kein Problem
Doch nach Neustart kommt folgendes :
***Adapter Desc: Intel DC21143 PCI Fast Ethernet Adapter
***MAC address: 00:40:F6:XX:XX:XX Local IP: 192.168.2.12 (via Packet-Driver #1)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:43:DC:52 (assuming that this is DBox).
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:DBox2YADDTFTPBOOTPpcboot"...
TFTP> Transfer finished, sent 434 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "CDBox2YADDtftpbootlogo-lcd"
TFTP> Started TFTP-Transfer for "C:DBox2YADDTFTPBOOTlogo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "CDBox2YADDtftpbootlogo-fb"
TFTP> Started TFTP-Transfer for "C:DBox2YADDTFTPBOOTlogo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "CDBox2YADDtftpbootkernel-cdk"
TFTP> Started TFTP-Transfer for "C:DBox2YADDTFTPBOOTkernel-cdk"...
TFTP> Transfer finished, sent 1063 blocks
BootP> Answer sent!
1 - mountd: mount: path: C/DBox2/YADD/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - inode: ReadLinkTarget traverses root-level: slSource.Count (6)> Owner.MntLevel (3), (for C:DBox2YADDCDKROOTlibmodules2.4.2BUILD.lnk)!
0 - nfsd: NFS_READ: cannot send reply
und keine Ausgabe im Terminal Fenster
Any Idea ???
Problem !
-
Stefanie
- Interessierter
- Beiträge: 66
- Registriert: Montag 3. September 2001, 00:00