@Dev's: Details zum Haenger beim Zappen beim letzen AlexW..

[Zahni]

... Image:

Leider habe ich z.Z. kein langes serielles Kabel. Mir ist aber per Telnet was aufgefallen. Anscheinend haengt sich der Prozess "[keventd]" auf.
Ist das zufaellig ein Kernelprozess ? Ausserdem behauptet der Envirment ich haette einen Avia 600. Ich habe aber einen 500'er. Box: Nokia Kabel
mit Bmon 1.0 alte Version ohne Schreibschutz mit 16/16/08 Speicher:
Hier sind die logs:

Code: Alles auswählen

  PID  Uid     Stat Command
    1 root     S    init
    2 root     Z    [keventd]
    3 root     S    [ksoftirqd_CPU0]
    4 root     S    [kswapd]
    5 root     S    [bdflush]
    6 root     S    [kupdated]
    7 root     S    [mtdblockd]
    8 root     S    init
    9 root     S    /bin/sh /etc/init.d/rcS
   12 root     S    [jffs2_gcd_mtd2]
   26 root     S    /sbin/inetd
   55 root     S    [fe_thread]
   63 root     S    /bin/sh /var/tuxbox/start_neutrino
   66 root     S    /bin/lcdd
   68 root     S    /bin/lcdd
   69 root     S    /bin/lcdd
   70 root     S    /bin/timerd
   72 root     S    /bin/sectionsd
   74 root     S    /bin/sectionsd
   75 root     S    /bin/sectionsd
   76 root     S    /bin/sectionsd
   77 root     S    /bin/sectionsd
   78 root     S    /bin/sectionsd
   79 root     S    /bin/zapit
   81 root     S    /bin/controld
   82 root     S    /bin/controld
   84 root     S    /bin/controld
   85 root     S    /bin/nhttpd
   86 root     S    /bin/neutrino -flash -su
   89 root     S    /bin/neutrino -flash -su
   90 root     S    /bin/neutrino -flash -su
   91 root     S    /bin/timerd
   92 root     S    /bin/timerd
   93 root     S    /bin/zapit
  105 root     S    in.telnetd: 192.168.0.3
  106 root     S    -sh
  107 root     R    ps
~ >

~ > set
fe='0'
USER='root'
MAIL='/var/spool/mail/root'
mID='01'
dsID='01-3b.21.80.07.00.00-be'
DEMOD='VES1820'
HOME='/var'
PS1='\w > '
OPTIND='1'
PS2='> '
LOGNAME='root'
fpREV='81'
_='-h'
hwREV='05'
TERM='ansi'
avia='600'
enxID='ffffffff'
PPID='105'
PATH='/sbin:/bin'
gtxID='0b'
REMOTEHOST='192.168.0.3'
feID='7a'
SHELL='/bin/sh'
IFS='
'
PWD='/var'
TZ='CET-1CEST,M3.5.0/2,M10.5.0/3'
fpID='5a'
~ >

Beim nach einem reboot per Telnet mit "reboot" stand beim Avia mal "500" drinn. Der reboot-Befehl klappt aber auch nicht immer.

Waehre schoen, wenn Ihr das fixen koenntet. Sowas kann ich leider nicht .

-Zahni

[Zahni]

Noch was (flass es hilft):

Code: Alles auswählen

/sbin > lsmod
Module                  Size  Used by
avia_gt_fb              7136  64
avia_gt_vbi             2048   0  (unused)
avia_gt_napi           17596   0  (unused)
ves1820                 4464   0  (unused)
dvb                    10292   2  [avia_gt_napi ves1820]
avia_gt                36788   0  [avia_gt_fb avia_gt_vbi avia_gt_napi dvb]
dvb_frontend            3872   0  [dvb]
dmxdev                  8496   1  [dvb]
lcd                    14540   1
cam                     8680   0  [dvb]
avia                   11704   0  [dvb avia_gt]
dvbdev                  2104   1  [dvb]
demux                    768   1  [avia_gt_vbi avia_gt_napi]
fp                     13912   1  [ves1820 cam avia]
saa7126                 5264   0
avs                    16868   0
event                   2384   1  [avia fp avs]
info                    4784   0  [avia_gt lcd cam avia fp saa7126 avs]
i2c-8xx                 6316   0  (unused)

-Zahni

[Zahni]

Noch was:

/proc > cat kmsg

Code: Alles auswählen

<4>Linux version 2.4.19-pre8-dbox2 (von alexW) (gcc version 3.0.4) #16 Son Mai 1
9 19:32:22 UTC 2002
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: ro root=1f03 console=null
<4>WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
<4>WARNING: OLD intfreq = 67 busfreq = 67
<4>WARNING: NEW intfreq = 67000000 busfreq = 67000000
<4>Decrementer Frequency = 251250000/60
<4>mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
<4>mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 66.56 BogoMIPS
<6>Memory: 30920k available (1032k kernel code, 352k data, 64k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>devfs: v1.12 (20020219) Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<5>JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communicati
ons AB.
<4>i2c-core.o: i2c core module
<6>CPM UART driver version 0.03
<6>ttyS00 at 0x0280 is a SMC
<6>ttyS01 at 0x0380 is a SMC
<4>pty: 256 Unix98 ptys configured
<4>eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:xx:xx:xx (edit)
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<5>D-Box 2 flash driver (size->0x800000 mem->0x10000000)
<7>0: offset=0x0,size=0x4000,blocks=8
<7>1: offset=0x20000,size=0x20000,blocks=63
<4>Using word write method
<5>Creating 7 MTD partitions on "D-Box 2 flash memory":
<5>0x00000000-0x00020000 : "BR bootloader"
<5>0x00020000-0x000c0000 : "idxfs (kernel, logos)"
<5>0x000c0000-0x00160000 : "var (jffs2)"
<5>0x00160000-0x00760000 : "root (cramfs)"
<5>0x00760000-0x00800000 : "flfs (ppcboot)"
<5>0x00020000-0x00800000 : "flash without bootloader"
<5>0x00000000-0x00800000 : "complete flash"
<6>mice: PS/2 mouse device common for all mice
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (cramfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 64k init
<4>Warning: unable to open an initial console.
<5>jffs2_scan_inode_node(): Data CRC failed on node at 0x00036eec: Read 0xabca04
20, calculated 0x6c0cb5fe
<5>jffs2_scan_inode_node(): Data CRC failed on node at 0x00062f5c: Read 0x6010c5
8a, calculated 0x7da6a195
<5>jffs2_scan_inode_node(): Data CRC failed on node at 0x0007f910: Read 0xf2dca7
f4, calculated 0x9251de4b
<5>jffs2_scan_inode_node(): Data CRC failed on node at 0x00091404: Read 0xdbc4ad
56, calculated 0xffa8d6c2
<4>[i2c-8xx]: mpc 8xx i2c init
<4>i2c-core.o: adapter  registered as adapter 0.
<4>[i2c-8xx]: adapter: 0
<4>i2c-core.o: driver FOR_PROBE_ONLY registered.
<4>i2c-core.o: driver unregistered: FOR_PROBE_ONLY
<7>mID: 01 feID: 7a fpID: 5a enxID: ffffffff gtxID: 0b hwREV: 05 fpREV: 81
<4>event: init ...
<4>i2c-core.o: driver i2c audio/video switch driver registered.
<4>i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
<4>i2c-core.o: driver i2c saa7126 driver registered.
<4>i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
<4>i2c-core.o: driver DBox2 Frontprocessor driver registered.
<4>i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos
. 2).
<4>AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
<4>der moment ist gekommen...
<4>lcd.o: init lcd driver module
<4>lcd.o: found KS0713/SED153X lcd interface on 1
<4>i2c-core.o: driver DBox2-CAM registered.
<4>CAM: attaching CAM at 0x6e
<4>i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
<4>CAM: attached to adapter
<4>write 1 event's ...
<4>write 1 event's ...
<4>avia_gt_core: $Id: avia_gt_core.c,v 1.19 2002/05/09 19:54:19 obi Exp $
<4>avia_gt_core: autodetecting chip type... AViA GTX found
<4>avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.13 2002/05/09 22:25:23 obi Exp $
<4>avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.86 2002/05/09 07:29:21 waldi Exp $
<4>avia_gt_gv: $Id: avia_gt_gv.c,v 1.17 2002/05/09 22:23:30 obi Exp $
<4>avia_gt_gv: set_input_size (width=720, height=576)
<4>avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.12 2002/05/08 12:56:41 obi Exp $
<4>avia_gt_capture: $Id: avia_gt_capture.c,v 1.18 2002/05/01 21:51:35 Jolt Exp $
<4>avia_gt_core: masking unhandled irq reg 0 bit 6
<4>avia_gt_pig: $Id: avia_gt_pig.c,v 1.18 2002/05/07 16:59:19 Jolt Exp $
<4>avia_gt_ir: $Id: avia_gt_ir.c,v 1.15 2002/05/13 22:38:36 Jolt Exp $
<5>avia_gt_core: Loaded AViA eNX/GTX driver
<4>avia_gt_core: masking unhandled irq reg 1 bit 13
<4>avia_gt_core: masking unhandled irq reg 1 bit 11
<4>i2c-core.o: driver VES1820 DVB demodulator registered.
<4>attach_adapter
<4>VES1820: attaching VES1820 at 0x10
<4>i2c-core.o: client [VES1820] registered to adapter [](pos. 4).
<4>VES1820: attached to adapter
<4>avia_gt_napi: $Id: avia_gt_napi.c,v 1.88 2002/05/07 16:59:19 Jolt Exp $
<4>avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
<4>avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.10 2002/05/06 02:18:18 obi Exp $
<4>avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
<4>avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.30 2002/05/03 16:47:35 obi Exp $
<4>avia_gt_gv: set_input_mode (mode=3)
<4>avia_gt_gv: set_input_size (width=720, height=576)
<4>avia_gt_gv: set_input_mode (mode=3)
<4>avia_gt_gv: set_input_size (width=720, height=576)
<4>avia_gt_gv: set_input_mode (mode=3)
<4>avia_gt_gv: set_input_size (width=720, height=576)
<4>Console: switching to colour frame buffer device 90x36
<6>avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
<4>dmxdev: set buffer size 40000 -> 60000
<4>dmxdev: set buffer size 40000 -> 60000
<4>set event: 00000009
<4>dmxdev: set buffer size 40000 -> 60000
<4>avia_gt_gv: set_input_mode (mode=2)
<4>avia_gt_gv: set_input_size (width=720, height=576)
<3>fbcon_setup: No support for fontwidth 8
<4>fbcon_setup: type 0 (aux 0, depth 8) not supported
<4>avia_gt_gv: set_input_mode (mode=2)
<4>avia_gt_gv: set_input_size (width=720, height=576)
<4>dmxdev: set buffer size 40000 -> 60000
<4>CAM: unsure length, reading again.
<4>i2c-CAM read error.
<6>avia_core.c: avia_interrupt: Reserved 01.
<4>write 1 event's ...
<4>write event ... free found
<4>write 1 event's ...
<4>write event ... free found
<4>write event ... filter ok
<4>avia_gt_core: masking unhandled irq reg 1 bit 15
<4>write 1 event's ...
<4>write event ... free found
<4>write 1 event's ...
<4>write event ... free found
<4>write 1 event's ...
<4>write event ... free found
<4>write event ... filter ok
<4>write 1 event's ...
<4>write event ... free found
<4>write event ... filter ok
<4>write 1 event's ...
<4>write event ... free found
<4>write event ... filter ok
<4>write 1 event's ...

Natuerlich (wie sollte es auch anders dein ) ist der Fehler bis jetzt nicht wieder aufgetreten. Ich werde mir mal das Proc-Verzeichnis genauer anschauen, wenn es wieder auftritt.

Ps..: Muss ich mir hierbei irgendwelche Sorgen machen (Flash kaputt, oder so ?):

<5>jffs2_scan_inode_node(): Data CRC failed on node at 0x00036eec: Read 0xabca04
20, calculated 0x6c0cb5fe
<5>jffs2_scan_inode_node(): Data CRC failed on node at 0x00062f5c: Read 0x6010c5
8a, calculated 0x7da6a195
<5>jffs2_scan_inode_node(): Data CRC failed on node at 0x0007f910: Read 0xf2dca7
f4, calculated 0x9251de4b
<5>jffs2_scan_inode_node(): Data CRC failed on node at 0x00091404: Read 0xdbc4ad
56, calculated 0xffa8d6c2


-Zahni

[humi]

hast du dir das mal angeschaut?

http://tuxbox.berlios.de/forum/viewtopic.php?t=8105

[Zahni]

Nein, Danke.

Wie gesagt, wenn der Fehler wieder auftritt, werde ich sofort Telnet anwerfen, und den Status von [keventd] und die KMsg's anschauen und posten. Das geht ja mit Linux recht gut

PS. Im Kabel gibt es kein digitales Viva !!

-Zahni

[derget]

hm :(

[Space_2063]

@zahni, bzgl. des CRC error im jffs2 schau dir mal den Thread an. Ich verwende bei meinen Boxen nur den alten Kernel und habe seitdem keine Probleme mehr (damit). Es gab schonmal einen Thread dazu im neutrino Forum, gerade wiedergefunden

[Zahni]

Probiere ich natuerlich mal (wenn der Kernel auch mit dem neusten AlexW-Image geht). Zunaechst moechte aber erstmal noch so viel wie moeglich posten, um die Fehlersuche zu erleichtern.

-Zahni

[Zahni]

So, nun hat es "geklappt". Es folgt Alles was ich fuer sinnvoll halte:

Code: Alles auswählen

/proc/2 > cat stat
2 (keventd) Z 1 1 1 0 -1 324 0 0 0 0 0 10309 0 0 9 0 0 0 34 0 0 4294967295 0 0 0
 0 0 0 2147418111 0 0 3221311112 0 0 0 0
/proc/2 >  

/proc/2 > cat statm
0 0 0 0 0 0 0 

/proc/2 > cat status
Name:   keventd
State:  Z (zombie)
Tgid:   2
Pid:    2
PPid:   1
TracerPid:      0
Uid:    0       0       0       0
Gid:    0       0       0       0
FDSize: 0
Groups:
SigPnd: 0000000000000000
SigBlk: fffffffffffeffff
SigIgn: 0000000000000000
SigCgt: 0000000000000000
CapInh: 0000000000000000
CapPrm: 00000000ffffffff
CapEff: 00000000fffffeff


/proc > cat kmsg    

[schnip]

<4>write 1 event's ...
<4>write event ... free found
<4>write 1 event's ...
<4>write event ... free found
<4>Oops: kernel access of bad area, sig: 11
<4>NIP: C3907DA8 XER: 20000000 LR: C3922708 SP: C01EDEF0 REGS: c01ede40 TRAP: 03
00    Not tainted
<4>MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
<4>DAR: 00000059, DSISR: 0000033B
<4>TASK = c01ec000[2] 'keventd' Last syscall: -1
<4>last math 00000000 last altivec 00000000
<4>GPR00: C3922708 C01EDEF0 C01EC000 C398B140 000000BC 00000000 00000000 C39248F
C
<4>GPR08: 00000000 00000000 C3907D94 00000001 24422044 10053BFC 01FE7600 01F9FB8
8
<4>GPR16: FFFFFFFF 00000000 007FFF00 00000002 01FE0914 00000000 C39245BC C39245C
8
<4>GPR24: 00000000 C398B140 000000BC 00000001 C39245C4 C392471C 00000007 000002D
0
<4>Call backtrace:
<4>C011D694 C3922708 C0016C5C C001E4C8 C0006A04
<4>dmxdev: set buffer size 40000 -> 60000
<4>dmxdev: set buffer size 40000 -> 60000
<4>dmxdev: set buffer size 40000 -> 60000
<4>dmxdev: set buffer size 40000 -> 60000
<4>dmxdev: set buffer size 40000 -> 60000
<4>dmxdev: set buffer size 40000 -> 60000
<4>dmxdev: set buffer size 40000 -> 60000
<4>dmxdev: set buffer size 40000 -> 60000
<4>dmxdev: set buffer size 40000 -> 60000
<4>dmxdev: set buffer size 40000 -> 60000   

[schnap]

/proc/bus > cat dbox
mID=01
feID=7a
fpID=5a
enxID=ffffffff
gtxID=0b
hwREV=05
fpREV=81
DEMOD=VES1820
fe=0
avia=600  DAS STIMMT NICHT !!
dsID=01-3b.21.80.07.00.00-be

/proc/bus > cat gtx-reg
GTX-Control-Register:
RR0:  0000
RR1:  0000
CR0:  B058
CR1:  FF00
COCR: 0000
C1CR: 0000
GTX-Clock-Register:
STC:  2DBC9FB6:0088
LSTC: 2B6D4234:8050
PCR:  2B6D4225:0060
GTX-Teletext-Register:
PTS0: E70B
PTS1: CDEB
TTCR: 0200
TTSR: 4012
GTX-Queue-Register:
TQP(R/W): 0005:95B0 0245:95B0
AQP(R/W): 0005:341E 0245:341E
VQP(R/W): 0004:6A86 0284:6A86   

/proc > cat meminfo
        total:    used:    free:  shared: buffers:  cached:
Mem:  31727616 20434944 11292672        0  3194880  6361088
Swap:        0        0        0
MemTotal:        30984 kB
MemFree:         11028 kB
MemShared:           0 kB
Buffers:          3120 kB
Cached:           6212 kB
SwapCached:          0 kB
Active:           2700 kB
Inactive:        13636 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        30984 kB
LowFree:         11028 kB
SwapTotal:           0 kB
SwapFree:            0 kB

/proc > cat ppc_htab
Non-error misses: 31963
Error misses    : 1    

-Zahni

[Zahni]

Nur eine Idee: koennte das damit was zu tun haben :

http://groups.google.de/groups?q=2.4.19 ... com&rnum=1


???

-Zahni

[Zahni]

( http://tuxbox.berlios.de/forum/viewtopi ... crc+kernel )

Schade, der alte Kernel geht mit dem neuen Image nicht mehr...

Code: Alles auswählen

ppcboot 0.6.4 (Mar  2 2002 - 20:44:32)

Initializing...
  CPU:   PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
  Board: ### No HW ID - assuming TQM8xxL
  DRAM:  (faked) 32 MB
  Ethernet: 00-50-9c-43-da-9c
  FLASH:  8 MB
  LCD driver (KS0713) initialized
  LCD logo at: 0x80832 (0x1E00 bytes)
  FB logo at: 0x8265A (0x31C1 bytes)
  AVIA Frambuffer
  Input:  serial
  Output: serial


 1: Console on null
 2: Console on ttyS0
 3: Console on framebuffer
Select (1-3), other keys to stop autoboot:  0 
...............................................................
Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x807D6 bytes)
## Booting Linux kernel at 10020034 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    526230 Bytes = 513 kB = 0 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #97 Mon Aug 27 17:52:09 CEST 2001
Boot arguments: ro root=1f03 console=ttyS0           
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=1f03 console=ttyS0           
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30792k available (960k kernel code, 392k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20376kB/6792kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:xx:xx:xx (edit)
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var"
0x00160000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
wrong magic
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x453d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x00f0 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0x0300 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x436f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0x7265 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0x6564 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0x4f4d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x7e4b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000028: 0x980d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000002c: 0x3b02 in
stead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x000182a8
You cannot use older JFFS2 filesystems with newer kernels

Uebrigens soll der Kernel 2.4.19-pre9 raus sein. Vielleciht geht es ja damit wieder.

-Zahni