Probleme mit YADD

[Yellowfan]

Moin!

Habe jetzt schon eine ganze Weile probiert und viel gelesen,doch irgendwie komme ich nicht weiter.
Das Problem ist ich habe auf meiner Box das AlexW Image 1.5,wollte aber auch mal andere Sachen probieren,sprich Lcars usw..Ich wollte aber nicht jedesmal das Image flashen und dachte es mit Yadd vom PC aus zu starten.Habe mich auch genau an die Beschreibungen dazu gehalten,läuft auch alles super an jedoch wenn der DBoxBootmanager versucht das Verzeichnis zu mounten bekomme ich eine Fehler : "NFS not mount" oder so.Frage 1 wo liegt mein Fehler,Frage 2 ist es notwendig ein Nullmodemkabel angeschlossen zu haben oder genügt das Netzwerkkabel?

[Dietmar]

NFS not mount liegt wohl am nicht laufenden NFS-Server. Oder an der Firewall, oder...
Die Yadd startet auch ohne Nullmodem, aber es erleichter die Fehlersuche ungemein.

[Yellowfan]

Welche Gründe könne vorliegen,dass der NFS Server nicht läuft?
Also Firewall ist nicht vorhanden,jedoch ein Virenscanner.Ja und das Nullmodemkabel will ich sowieso noch verlegen.

[Dietmar]

Die Einstellungen für die Yadd stimmen?
Evtl. blockiert auch Dein Virenscanner was.

[Yellowfan]

Also hab eigentlich alles so gemacht,wie es in der Beschreibung steht.

Hier nochmal zum nachvollziehen:

1. Verzeichnis C:\dbox2 angelegt
2. aus dem Yadd.tar das ppcboot und kernel nach c:\dbox2\tftpboot kopiert
3. im Bootmanager bei BootP c:\dbox2\tftpboot\ppcboot ausgewählt
4. das komplette Verzeichnis cdkroot aus dem Yadd.tar nach c:\dbox2 kopiert
5 im Bootmanager bei NFS Server c:\dbox2\cdkroot eingetragen

Sollte doch alles soweit richtig sein?

[Dietmar]

Das sollte soweit passen. (Du hast schon mit den untar-utils entpackt?)
Wie sieht denn Dein Netzwerklog (grauer Kasten) aus?

[Yellowfan]

Entpackt habe ich das ganze natürlich mit den dazugehörigen Tools.
Der graue Kasten bringt folgendes:

***Adapter Desc: Realtek RTL8029(AS) Ethernet Adapt
***MAC address: 00:02:44:25:F1:96 Local IP: 192.168.115.1 (via Packet-Driver #2)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\dbox2\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 439 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\dbox2\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\dbox2\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1204 blocks
BootP> Answer sent!
1 - mountd: mount: path: C/dbox2/cdkroot/

Danach ist Schluss,die Box bleibt bei Neutrino im Display stehen und im Bootmanager steht uneten Started... ,dann laufen die RX und TX Zahlen und das Ping kommt auch.

[Dietmar]

Hm, dann hat das mit dem mounten auch geklappt.
Jetzt wär ein Nullmodem fein, dann sieht man eher wo es fehlt.
Den neuesten Bootmanager hast Du schon?

[Yellowfan]

Tja Nullmodemkabel muss ich wohl bis Montag warten,da ich ein etwas längeres benötige.Und emin Bootmanager hat die Version 3.2.0.354.

[SoLaLa]

sieht eigentlich gut aus aber bedenke:

auch eine YADD läuft ohne Ucodes nicht, sind die drin?

[Yellowfan]

Natürlich sind die Ucodes drin!

[SoLaLa]

heyhey, war ja jetzt nicht persönlich gemeint, ist nur halt so daß das auch oft vergessen wird.
da werden wir jetzt wohl bis montag auf das Nullmodemkabel warten müssen und dann mal ins Log schaun

[Yellowfan]

Habe ich auch nicht persönlich genommen,ist vielleicht von mir blöd rüber gekommen.Bin gerade dabei mein Nullmodemkabel zusammen zubasteln,also wirds vielleicht heute noch was.

[Yellowfan]

So nun habe ich mein Nullmodemkabel fertig und funktioniert auch,also nun bekomme ich folgende Meldungen:

Data Size: 616299 Bytes = 601 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (steffen@sr01.sth-serv.de) (gcc version 3.0.3) #1 Fri Jan 11
00:16:01 CET 2002
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.115.1:C/dbox2/cdk
root/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.115.1:C/dbox
2/cdkroot/
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30584k available (1116k kernel code, 432k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20218kB/6739kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:15:e9:da
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.115.1, my address is 192.168.115.5
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.115.1
Looking up port of RPC 100005/2 on 192.168.115.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k it
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errnkmod: failed to exec
/sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0bin/modprobe -s -k binfmt-0000
, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to ex = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod:

[Dietmar]

hm, Du hast die Yadd schon mit den untar-utils entpackt?

[Yellowfan]

ja bin ich mir eigentlich ziemlich sicher,aber ich werde es nun nochmal tun und schauen.

[Yellowfan]

Bitte nicht hauen,aber es war anscheinend doch nicht richtig entpackt gewesen.Nun startet die Box,jedoch bekomme ich immer noch eine Fehlermeldung:

dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUg tap 4 (pid: 12)
NeutrinoNG $Id: neutrino.cpp,v 1.128 2002/01/11 00:09:10 McClean Exp $

1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth not supported
error while loading settings: /var/tuxbox/config/neutrino.conf
using defaults...

[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial Black/Regular)
That was returned: 00t

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! !!
!! ATTENTION, YOUR CARD DOES NOT MATCH CAMALPHA.BIN!!
!! !!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[zapit] fopen: /tmp/zapit_last_chan: No such file or directory
Changed to TV-mode
tv_channellist is empty
Wrong Command was send for channelsInit(). Exiting.
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12 set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 3 -> queue 3, pid 11
update pid 11: 0 times used.
disabling tap 3 (pid: 11)
set_pid_control_table, index 3 -> queue 3, pid 11
set_pid_control_table, index 3 -> queue 3, pid 11
CHCH [DEMUX] START 3
update pid 11: 1 times used.
enabling tap 3 (pid: 11)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 5 -> queue 5, pid 14
update pid 14: 0 times used.
disabling tap 5 (pid: 14)
set_pid_control_table, index 5 -> queue 5, pid 14
set_pid_control_table, index 5 -> queue 5, pid 14
CHCH [DEMUX] START 5
update pid 14: 1 times used.
enabling tap 5 (pid: 14)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_ndex 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 3 -> queue 3, pid 11
update pid 11: 0 times used.
disabling tap 3 (pid: 11)
set_pid_control_table, index 3 -> queue 3, pid 11
set_pid_control_table, index 3 -> queue 3, pid 11
CHCH [DEMUX] START 3
update pid 11: 1 times used.
enabling tap 3 (pid: 11)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
set_pid_control_table, index 3 -> queue 3, pid 11
update pid 11: 0 times used.
disabling tap 3 (pid: 11)
set_pid_control_table, index 3 -> queue 3, pid 11
set_pid_control_table, index 3 -> queue 3, pid 11
CHCH [DEMUX] START 3
update pid 11: 1 times used.
enabling tap 3 (pid: 11)
set_pid_control_table, index 4 -> queue ng tap 4 (pid: 12)
dmxdev: set buffer size 40000 -> 60000
set_pid_control_table, index 4 -> queue 4, pid 12
set_pid_control_table, index 4 -> queue 4, pid 12
CHCH [DEMUX] START 4
update pid 12: 1 times used.
enabling tap 4 (pid: 12)
neutrino exit
error while loading settings: /var/tuxbox/config/neutrino.conf
[neutrino] settings saved
lcddclient: connect: Connection refused

The system is going down NOW !!
Sending SIGTERM to all processesstop requested......
stop requested......
closed server-con
cp: /tmp/zapit_last_chan: No such file or directory
Sending SIGKILL to all processes.
set_pid_control_table, index 3 -> queue 3, pid 11
update pid 11: 0 times used.
disabling tap 3 (pid: 11)
set_pid_control_table, index 4 -> queue 4, pid 12
update pid 12: 0 times used.
disabling tap 4 (pid: 12)
set_pid_control_table, index 5 -> queue 5, pid 14
update pid 14: 0 times used.
disabling tap 5 (pid: 14)
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt

[Yellowfan]

So ich glaub das Problem hat sich erledigt,da ich ebend lcars gestartet habe und das läuft ohne probs.Schätze mal liegt an der Yadd Version.
Aber nochmals Danke.