Hurra ich glaub es hat geklappt mit DEBUG wie jetzt weiter ?

Beitrag von **DrStoned** » Samstag 1. Juni 2002, 15:37

Hallo mitnander
so wies aussieht habe ich den Debug hingekriegt mit meiner Nokia 2x Intel Kabel

Ich habs folgendermaßen gemacht.
Inzwischen hatte ich nen HUB dazwischen, Ausgabe lief danach deutlich langsamer

D-Box ausgesteckt
Kurzschlußschalter offen
Bootmanager gestartet
Box eingesteckt
Kurzschlußmeldung kam
Kurzschlußschalter geschlossen
Jumper XH 4 und XH 6 gesetzt
enable debug mit minflsh.txt ausgeführt
keine Reaktion im COM Terminal
dann Kurzschlußschalter wieder geöffnet
nochmal enable debug mit minflsh.txt ausgeführt
und siehe da es ging plötzlich

und was muß ich jetzt machen bin ganz aufgeregt

will nix verkehrt machen thanks

Greetz von DrStoned

und jetzt kommts auch im COM-Terninal

DebugEnabler (c) tmbinc, gillem +(sagem/13,amd,philips) 1.8beta
bl-version : 1.0
product? at : 10000944
current state : locked
flashrom type : 2x16 bit? yes. vendor: INTEL
unprotecting : OK!
flashing NOW : Done!

Please reset now!

DebugEnabler (c) tmbinc, gillem +(sagem/13,amd,philips) 1.8beta
bl-version : 1.0
product? at : 10000944
current state : unlocked
Please reset now!

DebugEnabler (c) tmbinc, gillem +(sagem/13,amd,philips) 1.8beta
bl-version : 1.0
product? at : 10000944
current state : unlocked
Please reset now!

oberes Fenster

***Adapter Desc: Winbond W89C940 PCI Network Adapter.
***MAC address: 48:54:E8:2A:12:ED Local IP: 192.168.0.1 (via Packet-Driver #1)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\minflsh\kernel\os"...
TFTP> Transfer finished, sent 2444 blocks
RARP> Answer sent to 00:50:9C:1F:58:29 with DBox-IP: 192.168.0.23
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\minflsh\kernel\os"...
TFTP> Transfer finished, sent 2444 blocks
RARP> Ignored, because requested MAC is 00:00:0C:14:60:00, expected MAC 00:50:9C:1F:58:29 (DBox-IP: 192.168.0.23)
RARP> Wenn die expected MAC mit C0:.... beginnt, ist das HÃ–CHSTWAHRSCHEINLICH ein 10/100MBit Problem! - Lest das Readme dazu!
RARP> Ignored, because requested MAC is 00:00:0C:14:60:00, expected MAC 00:50:9C:1F:58:29 (DBox-IP: 192.168.0.23)
RARP> Wenn die expected MAC mit C0:.... beginnt, ist das HÃ–CHSTWAHRSCHEINLICH ein 10/100MBit Problem! - Lest das Readme dazu!
RARP> Ignored, because requested MAC is 00:00:0C:14:60:00, expected MAC 00:50:9C:1F:58:29 (DBox-IP: 192.168.0.23)
RARP> Wenn die expected MAC mit C0:.... beginnt, ist das HÃ–CHSTWAHRSCHEINLICH ein 10/100MBit Problem! - Lest das Readme dazu!
RARP> Ignored, because requested MAC is 00:00:0C:14:60:00, expected MAC 00:50:9C:1F:58:29 (DBox-IP: 192.168.0.23)
RARP> Wenn die expected MAC mit C0:.... beginnt, ist das HÃ–CHSTWAHRSCHEINLICH ein 10/100MBit Problem! - Lest das Readme dazu!
RARP> Ignored, because requested MAC is 00:00:0C:14:60:00, expected MAC 00:50:9C:1F:58:29 (DBox-IP: 192.168.0.23)
RARP> Wenn die expected MAC mit C0:.... beginnt, ist das HÃ–CHSTWAHRSCHEINLICH ein 10/100MBit Problem! - Lest das Readme dazu!
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\minflsh\kernel\os"...
TFTP> Transfer finished, sent 2444 blocks
RARP> Answer sent to 00:50:9C:1F:58:29 with DBox-IP: 192.168.0.23
1 - mountd: mount: path: C/minflsh/
1 - mountd: mount: path: C/minflsh/
1 - mountd: mount: path: C/minflsh/
1 - mountd: mount: path: C/minflsh/

Fenster RSH-Client

> help
! Couldn't connect to DBOX! (Timeout..?)
> help
! Couldn't connect to DBOX! (Timeout..?)
> help
! Couldn't connect to DBOX! (Timeout..?)
> ping
! Couldn't connect to DBOX! (Timeout..?)
> ping
! Couldn't connect to DBOX! (Timeout..?)
> ping
! Couldn't connect to DBOX! (Timeout..?)
> ping
C_INIT: usage: ping host
> ping
C_INIT: usage: ping host
> ping 192.168.0.23
192.168.0.23 is alive
> help
ChorusOS r3 rsh daemon - valid commands are:

mount [hostaddr:filesystem|special_file [mount_point]]
umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
swapon mount_point
arun [-s site] [-S | -U] [-k] [-T] [-d] [-q] [-D] [-Z] actor_name [actor arguments]
akill [-s site] [-c] aid
aps [-s site]
reboot
route [add | delete [net | host] args]
ping host
echo string
setenv var value
unsetenv var
source filename
env
memstat
sleep [time in seconds, default=1s]
help
> help
ChorusOS r3 rsh daemon - valid commands are:

mount [hostaddr:filesystem|special_file [mount_point]]
umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
swapon mount_point
arun [-s site] [-S | -U] [-k] [-T] [-d] [-q] [-D] [-Z] actor_name [actor arguments]
akill [-s site] [-c] aid
aps [-s site]
reboot
route [add | delete [net | host] args]
ping host
echo string
setenv var value
unsetenv var
source filename
env
memstat
sleep [time in seconds, default=1s]
help
> help
ChorusOS r3 rsh daemon - valid commands are:

mount [hostaddr:filesystem|special_file [mount_point]]
umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
swapon mount_point
arun [-s site] [-S | -U] [-k] [-T] [-d] [-q] [-D] [-Z] actor_name [actor arguments]
akill [-s site] [-c] aid
aps [-s site]
reboot
route [add | delete [net | host] args]
ping host
echo string
setenv var value
unsetenv var
source filename
env
memstat
sleep [time in seconds, default=1s]
help
> help
ChorusOS r3 rsh daemon - valid commands are:

mount [hostaddr:filesystem|special_file [mount_point]]
umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
swapon mount_point
arun [-s site] [-S | -U] [-k] [-T] [-d] [-q] [-D] [-Z] actor_name [actor arguments]
akill [-s site] [-c] aid
aps [-s site]
reboot
route [add | delete [net | host] args]
ping host
echo string
setenv var value
unsetenv var
source filename
env
memstat
sleep [time in seconds, default=1s]
help
> help
ChorusOS r3 rsh daemon - valid commands are:

mount [hostaddr:filesystem|special_file [mount_point]]
umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
swapon mount_point
arun [-s site] [-S | -U] [-k] [-T] [-d] [-q] [-D] [-Z] actor_name [actor arguments]
akill [-s site] [-c] aid
aps [-s site]
reboot
route [add | delete [net | host] args]
ping host
echo string
setenv var value
unsetenv var
source filename
env
memstat
sleep [time in seconds, default=1s]
help
> ping 192.168.0.23
192.168.0.23 is alive
> echo Test
Test
> setenv PATH /root/platform/bin:/root/bin:/usr/bin:/usr/siege/bin:/mnt/bin
> setenv TZ MET-01METDST-02,J84,J302
> setenv LD_LIBRARY_PATH /root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib
> setenv SIEGEHOME /usr/siege
> setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:.
> umount /lost+found
/lost+found: not currently mounted
C_INIT: usage: umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
> umount /
> mount 192.168.0.1:C/minflsh/ /
C_INIT: mount 192.168.0.1:C/minflsh/ on /
;
;
;
;
; Und nun ins Terminalfenster (vorherige Seite) kucken!
;
;
;
;
> arun initactor -v -V -i 4
started aid = 10
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/unknown-unknown/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 187 sec, 20000000 nsec
INIT: started aid = 11
INIT: execute "upgrade"
INIT: time: 190 sec, 680000000 nsec
INIT: afexec of upgrade failed - No such file or directory
INIT: start run level 3
INIT: execute "wsysserver"
INIT: time: 190 sec, 730000000 nsec
INIT: afexec of wsysserver failed - No such file or directory
INIT: execute "dooractor"
INIT: time: 190 sec, 770000000 nsec
INIT: afexec of dooractor failed - No such file or directory
INIT: execute "nameserver"
INIT: time: 190 sec, 810000000 nsec
INIT: afexec of nameserver failed - No such file or directory
INIT: execute "pppd"
INIT: time: 190 sec, 860000000 nsec
INIT: afexec of pppd failed - No such file or directory
INIT: execute "inetNSdns -env"
INIT: time: 190 sec, 900000000 nsec
INIT: afexec of inetNSdns failed - No such file or directory
INIT: execute "bcsubsystem"
INIT: time: 190 sec, 940000000 nsec
INIT: afexec of bcsubsystem failed - No such file or directory
INIT: execute "casubsystem"
INIT: time: 190 sec, 980000000 nsec
INIT: afexec of casubsystem failed - No such file or directory
INIT: execute "dvbsubsystem"
INIT: time: 191 sec, 20000000 nsec
INIT: afexec of dvbsubsystem failed - No such file or directory
INIT: start run level 4
INIT: execute "setenv SIEGEHOME /usr/siege"
INIT: execute "setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:."
INIT: execute "siegep junior.finder.StartUp"
INIT: time: 191 sec, 70000000 nsec
INIT: afexec of siegep failed - No such file or directory
! Execution stopped!
> echo Test
Test
> setenv PATH /root/platform/bin:/root/bin:/usr/bin:/usr/siege/bin:/mnt/bin
> setenv TZ MET-01METDST-02,J84,J302
> setenv LD_LIBRARY_PATH /root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib
> setenv SIEGEHOME /usr/siege
> setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:.
> umount /lost+found
/lost+found: not currently mounted
C_INIT: usage: umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
> umount /
/: Device busy
C_INIT: usage: umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
> mount 192.168.0.1:C/minflsh/ /
C_INIT: mount 192.168.0.1:C/minflsh/ on /
;
;
;
;
; Und nun ins Terminalfenster (vorherige Seite) kucken!
;
;
;
;
> arun initactor -v -V -i 4
started aid = 11
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/nokia-dbox2/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 254 sec, 70000000 nsec
INIT: started aid = 12
INIT: execute "upgrade"
INIT: time: 257 sec, 770000000 nsec
INIT: afexec of upgrade failed - No such file or directory
INIT: start run level 3
INIT: execute "wsysserver"
INIT: time: 259 sec, 770000000 nsec
INIT: afexec of wsysserver failed - No such file or directory
INIT: execute "dooractor"
INIT: time: 261 sec, 270000000 nsec
INIT: afexec of dooractor failed - No such file or directory
INIT: execute "nameserver"
INIT: time: 262 sec, 770000000 nsec
INIT: afexec of nameserver failed - No such file or directory
INIT: execute "pppd"
INIT: time: 264 sec, 770000000 nsec
INIT: afexec of pppd failed - No such file or directory
INIT: execute "inetNSdns -env"
INIT: time: 266 sec, 280000000 nsec
INIT: afexec of inetNSdns failed - No such file or directory
INIT: execute "bcsubsystem"
INIT: time: 267 sec, 790000000 nsec
INIT: afexec of bcsubsystem failed - No such file or directory
INIT: execute "casubsystem"
INIT: time: 269 sec, 800000000 nsec
INIT: afexec of casubsystem failed - No such file or directory
INIT: execute "dvbsubsystem"
INIT: time: 271 sec, 300000000 nsec
INIT: afexec of dvbsubsystem failed - No such file or directory
INIT: start run level 4
INIT: execute "setenv SIEGEHOME /usr/siege"
INIT: execute "setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:."
INIT: execute "siegep junior.finder.StartUp"
INIT: time: 272 sec, 800000000 nsec
INIT: afexec of siegep failed - No such file or directory
! Execution stopped!
> ping 192.168.0.23
192.168.0.23 is alive
> ping 192.168.0.23
192.168.0.23 is alive
> ping 192.168.0.23
192.168.0.23 is alive
> ping 192.168.0.23
192.168.0.23 is alive
> ping 192.168.0.23
192.168.0.23 is alive
> ping 192.168.0.23
192.168.0.23 is alive
> arun initactor -v -V -i 4
started aid = 13
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/nokia-dbox2/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 313 sec, 260000000 nsec
INIT: started aid = 14
INIT: execute "upgrade"
INIT: time: 321 sec, 640000000 nsec
INIT: afexec of upgrade failed - No such file or directory
INIT: start run level 3
INIT: execute "wsysserver"
INIT: time: 328 sec, 350000000 nsec
INIT: afexec of wsysserver failed - No such file or directory
INIT: execute "dooractor"
INIT: time: 331 sec, 750000000 nsec
INIT: afexec of dooractor failed - No such file or directory
INIT: execute "nameserver"
INIT: time: 335 sec, 550000000 nsec
INIT: afexec of nameserver failed - No such file or directory
INIT: execute "pppd"
INIT: time: 338 sec, 960000000 nsec
INIT: afexec of pppd failed - No such file or directory
INIT: execute "inetNSdns -env"
INIT: time: 342 sec, 560000000 nsec
INIT: afexec of inetNSdns failed - No such file or directory
INIT: execute "bcsubsystem"
INIT: time: 345 sec, 960000000 nsec
INIT: afexec of bcsubsystem failed - No such file or directory
INIT: execute "casubsystem"
INIT: time: 349 sec, 560000000 nsec
INIT: afexec of casubsystem failed - No such file or directory
INIT: execute "dvbsubsystem"
INIT: time: 352 sec, 960000000 nsec
INIT: afexec of dvbsubsystem failed - No such file or directory
INIT: start run level 4
INIT: execute "setenv SIEGEHOME /usr/siege"
INIT: execute "setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:."
INIT: execute "siegep junior.finder.StartUp"
INIT: time: 356 sec, 560000000 nsec
INIT: afexec of siegep failed - No such file or directory
> mount 192.168.0.1:C/minflsh/ /
C_INIT: mount 192.168.0.1:C/minflsh/ on /
> echo Test
Test
> setenv PATH /root/platform/bin:/root/bin:/usr/bin:/usr/siege/bin:/mnt/bin
> setenv TZ MET-01METDST-02,J84,J302
> setenv LD_LIBRARY_PATH /root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib
> setenv SIEGEHOME /usr/siege
> setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:.
> umount /lost+found
/lost+found: not currently mounted
C_INIT: usage: umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
> umount /
/: Device busy
C_INIT: usage: umount [-v|-F|-f|-a|-t [ufs|nfs]] [special_file]
> mount 192.168.0.1:C/minflsh/ /
C_INIT: mount 192.168.0.1:C/minflsh/ on /
;
;
;
;
; Und nun ins Terminalfenster (vorherige Seite) kucken!
;
;
;
;
> arun initactor -v -V -i 4
started aid = 15
INIT Version 0.9 loaded
INIT: library path: "LD_LIBRARY_PATH=/root/platform/nokia-dbox2/lib:/root/platform/lib:/root/lib:/usr/lib:/root/platform/mpc8xx-dbox2/lib:/root/platform/nokia-dbox2/lib"
INIT: start run level 2
INIT: execute "ddf"
INIT: time: 403 sec, 560000000 nsec
INIT: started aid = 16
INIT: execute "upgrade"
INIT: time: 418 sec, 450000000 nsec
INIT: afexec of upgrade failed - No such file or directory
INIT: start run level 3
INIT: execute "wsysserver"
INIT: time: 435 sec, 160000000 nsec
INIT: afexec of wsysserver failed - No such file or directory
INIT: execute "dooractor"
INIT: time: 441 sec, 160000000 nsec
INIT: afexec of dooractor failed - No such file or directory
INIT: execute "nameserver"
INIT: time: 447 sec, 160000000 nsec
INIT: afexec of nameserver failed - No such file or directory
INIT: execute "pppd"
INIT: time: 453 sec, 160000000 nsec
INIT: afexec of pppd failed - No such file or directory
INIT: execute "inetNSdns -env"
INIT: time: 459 sec, 160000000 nsec
INIT: afexec of inetNSdns failed - No such file or directory
INIT: execute "bcsubsystem"
INIT: time: 465 sec, 160000000 nsec
INIT: afexec of bcsubsystem failed - No such file or directory
INIT: execute "casubsystem"
INIT: time: 471 sec, 160000000 nsec
INIT: afexec of casubsystem failed - No such file or directory
INIT: execute "dvbsubsystem"
INIT: time: 477 sec, 160000000 nsec
INIT: afexec of dvbsubsystem failed - No such file or directory
INIT: start run level 4
INIT: execute "setenv SIEGEHOME /usr/siege"
INIT: execute "setenv CLASSPATH /usr/siege/lib/siege.jar:/usr/siege/lib/junior.jar:."
INIT: execute "siegep junior.finder.StartUp"
INIT: time: 483 sec, 200000000 nsec
INIT: afexec of siegep failed - No such file or directory

Beitrag von **sloop** » Samstag 1. Juni 2002, 15:41

na also jetzt erst mal Image auslesen und Ucodes auslesen. sonst noch nichts, ach ja alle Brücken raus und Box zuschrauben.

Beitrag von **Dietmar** » Samstag 1. Juni 2002, 15:41

flashing NOW : Done!

Herzlichen Glückwunsch.

Minflsh in die Rumpelkammer, alle Brücken, Schalter usw. raus aus der Box.

Jetzt ein Image auslesen (Image auslesen Button des Bootmanagers)
Daraus die Ucodes gewinnen (Dateien extrahieren Button, gleiches Programm)

und dann kannst Du ein Linux-Image flashen

Beitrag von **DrStoned** » Samstag 1. Juni 2002, 15:47

Hallo Dietmar und Sloop
danke erstmal für alles,

kann ich den Stecker ziehen oder nur Reset

Greetz von DrStoned

Beitrag von **sloop** » Samstag 1. Juni 2002, 15:50

eigentlich egal

Beitrag von **Dietmar** » Samstag 1. Juni 2002, 15:51

Stecker raus, Bootmanager aus und die Box entrümpeln.

Beitrag von **DrStoned** » Samstag 1. Juni 2002, 16:04

Hallo mitnander,
vielen Dank noch mal besonders an Dietmar, Du scheinst ja hier 25 Std.

am Tag im Forum aktiv zu sein,

schich mir mal ne PM mit Deiner Adresse, dann schick ich Dir nen Gutschein für nen Kasten Bier.

Greetz von DrStoned

Beitrag von **Hupe1** » Donnerstag 6. Juni 2002, 22:45

Hi zusammen !

Hab ein kleines Problem, mit dem Image auslesen, wenn ich alles starte, dann kommen im Com-Fenster die ganzen Meldungen, bis zum dauernt wiederkehrenden Fehler "nochmal".

ppcboot 0.6.4 (Sep 19 2001 - 20:10:10)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-10-d1-61
FLASH: 8 MB
Input: serial
Output: serial

anykey druecken um flash auslesen abzubrech 0
BOOTP broadcast 1
Bootp from server 0.0.0.0; our IP address is 0.0.0.0
Sending Flash over UDP
nochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnoc
hmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochma
lnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalno
chmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochm
alnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmaln
ochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnoch
malnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmal
nochmalnochmalnochmalnochmal

Ich habe eine Nokia 2xI
Bei meiner Sagem 1xI hat alles wie von selbst geklappt. Da kam ein Menü im Com z.bsp. Drücke 1 für Image auslesen o.ä. und dann wurde das Flash.img erzeugt.

Hat jemand eine Idee wie ich doch noch die BN kopiert bekomme ? Hänge schon gut 3h dran.

Ciao Hupe

Such mal nach DBOX2.RAR

Beitrag von **Hupe1** » Donnerstag 6. Juni 2002, 23:06

Cool, es hat funktioniert !!!!!
Jetzt kann ich Neutrino aufspielen.
Ich danke dir vielmals !!!!

Ciao Hupe

Null Problemo !

Tuxbox-Board

Hurra ich glaub es hat geklappt mit DEBUG wie jetzt weiter ?

Hurra ich glaub es hat geklappt mit DEBUG wie jetzt weiter ?

Thanks und noch ne kleine Frage

Vielen Dank noch mal