Grosse Prob beim Image Flashen "Dietmar´s Probs" g

Anlaufschwierigkeiten? Was ist was? Worum geht's?
ika23
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Mittwoch 18. Dezember 2002, 21:02

Grosse Prob beim Image Flashen "Dietmar´s Probs" g

Beitrag von ika23 »

Schönen guten Abend,

Hab schon lange immer hilfreiche Tipps hier gefunden.Nun aber hab ich ne Box hier die mich in den Wahnsinn treibt.


debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-69.3d.81.07.00.00-2c
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
=> bootp 120000 /D/dbox2/dbox/alex1.6.3/alexW2xBaseimageV1.6.3.img
BOOTP broadcast 1
=>
“SO HIER HAB ICH DEN RESET AN DER BOX GEMACHT”

<debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-69.3d.81.07.00.00-2c
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
=>
=> bootp 120000 /D/dbox2/dbox/alex1.6.3/alexW2xBaseimageV1.6.3.img
BOOTP broadcast 1
=> boot end
Usage:
bootd - boot default, i.e., run 'bootcmd'

=> bootend
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 582941 bytes loaded to 0x100000
## Booting image at 00120000 ...
Bad Magic Number
=> bootcmd
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 582941 bytes loaded to 0x100000
## Booting image at 00120000 ...
Bad Magic Number
=>

Was will mir die Werbung sagen??
Hab die Box bei Ebay ersteigert und ist irgendson müll drauf .Meine andere Nokia angeschlossen ohne Probleme.Gleiche Rechner.(XP Switch 10/100)
Wenn ich das Flasch mit der Expertenfunktion ändern will steht da "kann Datei nicht öffnen"
Habe auch schon von Dietmar-H die How To Do gelesen aber das klappt alles nicht.Die ganzen Meldungen sagen mir auch nicht wirklich viel.Danke für eure hilfe.
ika23
Zahni
Tuxboxer
Tuxboxer
Beiträge: 2227
Registriert: Freitag 24. Mai 2002, 10:38

Beitrag von Zahni »

Ich nehme mal an, dass Du ein Image flashen willst.
Zu diesem Theme bitte in der Suchfunktion "boot net failed" eingeben.

-Zahni
ika23
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Mittwoch 18. Dezember 2002, 21:02

Beitrag von ika23 »

@Zahni

ja hab ich schon .bevor ich mich angemeldet hab so seid cirka 2 stunden gelsen und getestet.Kein erfolg.
Ich weiss "boot net failed" hab ja auch schon die Howtodo von Dietmar h gelesen auch alles ausprobiert oder hab ich was übersehen.
Bei meiner andern Nokia klappt ja alles !!Nur die Box will nicht.

Danke für die hilfe .
Zahni
Tuxboxer
Tuxboxer
Beiträge: 2227
Registriert: Freitag 24. Mai 2002, 10:38

Beitrag von Zahni »

Das steht soch zig-mal im Board !!

Linke (?) Taste beim Einschlaten gedrueckt halten. Dann im COM-Terminal "boot net" eingeben.

-Zahni
ika23
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Mittwoch 18. Dezember 2002, 21:02

Beitrag von ika23 »

gemacht getan>

<debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-69.3d.81.07.00.00-2c
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
=> bootp 120000 /D/dbox2/dbox/alex1.6.3/alexW2xBaseimageV1.6.3.img
BOOTP broadcast 1
=> <debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-69.3d.81.07.00.00-2c
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
debug: &_end 0x34894, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.X, My IP 192.168.0.XX
debug: Sending TFTP-request for file D/dbox2/dboxboot/ppcboot_writeflash

So hab ich .Und das was oben steht kommt bei rumm.Da steht noch "Boot vorgang erkannt - warte auf ppcboot"

Oben steht noch :
***Adapter Desc: SiS NIC SISNIC (Microsoft's Packet Scheduler)
***MAC address: 00:07:95:27:1C:45 Local IP: 192.168.0.xx (via Packet-Driver #0)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:43:FC:CB (assuming that this is DBox).
BootP> Answer sent!
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "D:\dbox2\dboxboot\ppcboot_writeflash"...


So was nun ?
Ich weiss ich bin nervig.Verschenke auch zur Weihnachten Baldrian und Schokolade :D
Zahni
Tuxboxer
Tuxboxer
Beiträge: 2227
Registriert: Freitag 24. Mai 2002, 10:38

Beitrag von Zahni »

Crossoverkabel nehmen, Mediasensing in XP ausstellen, die Xe aus den IP-Adressen rausnehemen (die guckt Dir keiner weg; sind private).
Saemtliche Firewalls und andere IP-Software deinstallieren. Netzwerkkartentreiber aktualisieren. Die Netzwerkkarte ist etwas selten.

-Zahni
Zahni
Tuxboxer
Tuxboxer
Beiträge: 2227
Registriert: Freitag 24. Mai 2002, 10:38

Beitrag von Zahni »

PS. Was steht denn dann im COM-Log ?
ika23
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Mittwoch 18. Dezember 2002, 21:02

Beitrag von ika23 »

@Zahni
Danke- das nächste Meerschweinchen was meine Freundin sich holt bekommt deinen NAMEN :lol: :lol: .

Ne im ernst läuft jetzt alles .Hab meine Treiber von der Netzwerkkarte gelöscht und neu installiert(onboard sis)nen crossover kabel genommen und es lief!
Komisch ist nur das ich mit der alten konfig (Switch) meine alte Box ohne Probs flaschen konnte.(Wo soll das dran liegen??) Na egal die Box kommt eh ins Schlafzimmer und gut ist.

Danke nochmal.

ika23(alias tvmann)

Sag mal zhani bist du auch bei Digitv aktiv??Hab da glaub deinen nick schonmal gesehen?