tuxbox-cvs/apps/tuxbox/enigma/Makefile] Fehler 1

[Natascha]

cd /root/tuxbox-cvs/apps/tuxbox/enigma && ./autogen.sh && CC=powerpc-tuxbox-linux-gnu-gcc CXX=powerpc-tuxbox-linux-gnu-g++ CFLAGS="-Wall -O3 -mcpu=823 -msoft-float -mmultiple -mstring -g -ggdb -pipe" CXXFLAGS="-Wall -O3 -mcpu=823 -msoft-float -mmultiple -mstring -g -ggdb -pipe" ./configure --build=i686-pc-linux-gnu --host=powerpc-tuxbox-linux-gnu --prefix=/dbox2/cdkroot --with-driver=/root/tuxbox-cvs/driver --with-dvbincludes=/root/tuxbox-cvs/driver/include --with-target=cdk --enable-maintainer-mode
Generating configuration files for tuxbox-enigma, please wait....
aclocal
libtoolize --automake
autoconf
configure.ac:4: warning: do not use m4_patsubst: use patsubst or m4_bpatsubst
configure.ac:63: warning: do not use m4_regexp: use regexp or m4_bregexp
autoheader
automake --add-missing
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for powerpc-tuxbox-linux-gnu-gcc... powerpc-tuxbox-linux-gnu-gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... yes
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether powerpc-tuxbox-linux-gnu-gcc accepts -g... yes
checking for powerpc-tuxbox-linux-gnu-gcc option to accept ANSI C... none needed
checking dependency style of powerpc-tuxbox-linux-gnu-gcc... gcc3
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking for _LARGE_FILES value needed for large files... no
checking build system type... i686-pc-linux-gnu
checking host system type... powerpc-tuxbox-linux-gnu
checking for powerpc-tuxbox-linux-gnu-gcc... (cached) powerpc-tuxbox-linux-gnu-gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether powerpc-tuxbox-linux-gnu-gcc accepts -g... (cached) yes
checking for powerpc-tuxbox-linux-gnu-gcc option to accept ANSI C... (cached) none needed
checking dependency style of powerpc-tuxbox-linux-gnu-gcc... (cached) gcc3
checking for powerpc-tuxbox-linux-gnu-g++... powerpc-tuxbox-linux-gnu-g++
checking whether we are using the GNU C++ compiler... yes
checking whether powerpc-tuxbox-linux-gnu-g++ accepts -g... yes
checking dependency style of powerpc-tuxbox-linux-gnu-g++... gcc3
checking for ld used by GCC... /dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld
checking if the linker (/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) is GNU ld... yes
checking for /dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /dbox2/cdk/bin/powerpc-tuxbox-linux-gnu-nm -B
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking command to parse /dbox2/cdk/bin/powerpc-tuxbox-linux-gnu-nm -B output... ok
checking how to run the C preprocessor... powerpc-tuxbox-linux-gnu-gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for powerpc-tuxbox-linux-gnu-ranlib... powerpc-tuxbox-linux-gnu-ranlib
checking for powerpc-tuxbox-linux-gnu-strip... powerpc-tuxbox-linux-gnu-strip
checking for objdir... .libs
checking for powerpc-tuxbox-linux-gnu-gcc option to produce PIC... -fPIC
checking if powerpc-tuxbox-linux-gnu-gcc PIC flag -fPIC works... yes
checking if powerpc-tuxbox-linux-gnu-gcc static flag -static works... yes
checking if powerpc-tuxbox-linux-gnu-gcc supports -c -o file.o... yes
checking if powerpc-tuxbox-linux-gnu-gcc supports -c -o file.lo... yes
checking if powerpc-tuxbox-linux-gnu-gcc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether -lc should be explicitly linked in... no
creating libtool
checking dvb/version.h usability... no
checking dvb/version.h presence... no
checking for dvb/version.h... no
checking ost/dmx.h usability... yes
checking ost/dmx.h presence... yes
checking for ost/dmx.h... yes
configure: found dvb version 1
checking for freetype-config... /dbox2/cdk/bin/freetype-config
checking for pkg-config... no
configure: error: could not find pkg-config
make: *** [/root/tuxbox-cvs/apps/tuxbox/enigma/Makefile] Fehler 1

neuer Fehler wer kennt sich den damit aus??

Was kann ich da machen?

Danke

[TheDOC]

Du musst pkg-config installieren.

[Natascha]

hm.......welche version brauche ich
hab nach gesehen ist aber irgendwie nicht zu finden mit

apt-cache search pkg-config

[TheDOC]

http://www.freedesktop.org/software/pkgconfig/

[obi]

pkg-config - program and autoconf macro to gather compile/link flags

apt-get install pkg-config

[Natascha]

ja klasse ,das wäre gelöst!!!!

so nun hab ich noch 2 Fehler,......

der erste

powerpc-tuxbox-linux-gnu-g++ -Wall -O3 -mcpu=823 -msoft-float -mmultiple -mstring -g -ggdb -pipe -o .libs/neutrino neutrino.o daemonc/libneutrino_daemonc.a driver/libneutrino_driver.a gui/bedit/libneutrino_gui_bedit.a gui/widget/libneutrino_gui_widget.a gui/libtimerlist.a gui/libneutrino_gui.a gui/widget/libneutrino_gui_widget2.a gui/widget/libneutrino_gui_widget_basic.a system/libneutrino_system.a gui/libneutrino_gui2.a ../lib/controldclient/.libs/libcontroldclient.so ../lib/lcddclient/.libs/liblcddclient.so ../lib/sectionsdclient/.libs/libsectionsdclient.so ../lib/timerdclient/.libs/libtimerdclient.so -L/dbox2/cdkroot/lib /dbox2/cdkroot/lib/libconfigfile.so /dbox2/cdkroot/lib/libcramfs.so /dbox2/cdkroot/lib/libcurl.so -lssl -lcrypto -ldl /dbox2/cdkroot/lib/libfreetype.so /dbox2/cdkroot/lib/libmd5sum.so /dbox2/cdkroot/lib/libnet.so /dbox2/cdkroot/lib/libucodes.so /dbox2/cdkroot/lib/libzapitclient.so /dbox2/cdkroot/lib/libeventserver.so -lpthread -lz -Wl,--rpath -Wl,/dbox2/cdkroot/lib
daemonc/libneutrino_daemonc.a: could not read symbols: Archive has no index; run ranlib to add one
collect2: ld returned 1 exit status
make[4]: *** [neutrino] Fehler 1
make[4]: Leaving directory `/root/tuxbox-cvs/apps/tuxbox/neutrino/src'
make[3]: *** [all-recursive] Fehler 1
make[3]: Leaving directory `/root/tuxbox-cvs/apps/tuxbox/neutrino/src'
make[2]: *** [all-recursive] Fehler 1
make[2]: Leaving directory `/root/tuxbox-cvs/apps/tuxbox/neutrino'
make[1]: *** [all] Fehler 2
make[1]: Leaving directory `/root/tuxbox-cvs/apps/tuxbox/neutrino'
make: *** [.neutrino] Fehler 2


der zweite

make[2]: Leaving directory `/root/tuxbox-cvs/cdk/linux-2.4.19/arch/ppc/lib'
make -C arch/ppc/math-emu modules_install
make[2]: Entering directory `/root/tuxbox-cvs/cdk/linux-2.4.19/arch/ppc/math-emu'
make[2]: Für das Target »modules_install« gibt es nichts zu tun.
make[2]: Leaving directory `/root/tuxbox-cvs/cdk/linux-2.4.19/arch/ppc/math-emu'
make -C arch/ppc/8xx_io modules_install
make[2]: Entering directory `/root/tuxbox-cvs/cdk/linux-2.4.19/arch/ppc/8xx_io'
make[2]: Für das Target »modules_install« gibt es nichts zu tun.
make[2]: Leaving directory `/root/tuxbox-cvs/cdk/linux-2.4.19/arch/ppc/8xx_io'
cd /dbox2/cdkroot/lib/modules/2.4.19; \
mkdir -p pcmcia; \
find kernel -path '*/pcmcia/*' -name '*.o' | xargs -i -r ln -sf ../{} pcmcia
make[1]: Leaving directory `/root/tuxbox-cvs/cdk/linux-2.4.19'
/dbox2/cdk/bin/mkimage \
-n 'dbox2' -A ppc -O linux -T kernel -C gzip \
-a 00000000 -e 00000000 \
-d `if [ -f linux-2.4.19/arch/ppc/coffboot/vmlinux.gz ]; then echo linux-2.4.19/arch/ppc/coffboot/vmlinux.gz;
else echo linux-2.4.19/arch/ppc/boot/images/vmlinux.gz; fi` \
/dbox2/tftpboot/kernel-cdk;
/bin/sh: /dbox2/cdk/bin/mkimage: Datei oder Verzeichnis nicht gefunden
make: *** [.linuxkernel] Fehler 127
debian:~/tuxbox-cvs/cdk#

hatte die pakete getoucht , aber jetz wieder aufgerufen........nur noch die 2 Sachen und es wäre durchgelaufen.....

wer kann mir da helfen??

Danke

[woglinde]

Hi,

bentutzt du den release branch oder head?
Weil in HEAD haben wir kernel-2.4.20

Gruss Woglinde