Beim extrahieren des Images meldet der Bootmanager keinen Fehler, jedoch lese ich im Logfile, dass die cam-alpha beschädigt ist. Ich habe es x-mal probiert und bekomme immer wieder das gleiche Ergebnis. Ist die cam-alpha nun brauchbar weil Bootmanager ja keinen Fehler meldete oder ist sie defekt, wie im Logfile gemeldet ?
Was soll ich nun als richtig einstufen, die Meldung vom Bootmanager oder den Hinweis im Logfile ? Wie sieht das aus, wenn ich diese Datei nicht mehr extrahieren kann ? Ist es möglich, diese Datei von einer anderen Box (natürlich gleichen Typs) zu extrahieren und bei mir zu verwenden ?
Kann mir in diesen Fragen geholfen werden ? Danke für Eure Mühe.
Logfile vom extrahieren
---------------------------------
***Adapter Desc: Realtek RTL8029(AS) Ethernet Adapt
***MAC address: 00:00:B4:54:00:7A Local IP: 192.168.0.1 (via Packet-Driver #3)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:10:DE:25 (assuming that this is DBox).
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "G:\CARDSOFTPRG\4LINUX\DB2BOOTMANAGER\ppcboot_readflash"...
TFTP> Transfer finished, sent 405 blocks
BootP> Answer sent!
Versuche Image zu de-interleaven...
Image deinterleaving beendet...
Found Superblock v3.1
Extraction gestartet - Suche Dateien...
Datei "cam-alpha.bin" gefunden.
Datei "cam-alpha.bin" erfolgreich extrahiert!
MD5-Summe für "E:\DBox2orgImg\extrahiert4\cam-alpha.bin" nicht erkannt! Die Datei ist wahrscheinlich beschädigt!
Datei "dmx.so" gefunden.
Datei "dmx.so" erfolgreich extrahiert!
ucode.bin wurde erfolgreich aus dmx.so erstellt!
MD5-ID für "E:\DBox2orgImg\extrahiert4\ucode.bin" ist: ucode
Datei "500v" gefunden.
Datei "500v110.ux" erfolgreich extrahiert!
MD5-ID für "E:\DBox2orgImg\extrahiert4\avia500.ux" ist: avia500v110
Datei "600v" gefunden.
Datei "600vb022.ux" erfolgreich extrahiert!
MD5-ID für "E:\DBox2orgImg\extrahiert4\avia600.ux" ist: avia600vb022
Datei "os" gefunden.
Datei "os" erfolgreich extrahiert!
cam-alpha beschädigt oder nicht beschädigt ?
-
FlashNash
- Interessierter
- Beiträge: 29
- Registriert: Sonntag 26. Januar 2003, 04:31
cam-alpha beschädigt oder nicht beschädigt ?
Die Schlauheit des Fuchses besteht zu 99% aus der Dummheit der Hühner.
-
SoLaLa
- Tuxboxer
- Beiträge: 6119
- Registriert: Mittwoch 3. April 2002, 00:32
-
Dietmar
- Senior Member
- Beiträge: 8282
- Registriert: Mittwoch 10. Oktober 2001, 00:00
Die Meldung hat erstmal gar nix zu sagen.
Der Bootmanager kennt die cam-alpha aus der BN2.01 ganz einfach nicht.
Wichtig ist erstmal: Stimmt die Größe? (131.072 Byte)
Und unter Neutrino -> Service -> Ucodes überprüfen kannst dann nochmal ganz genau nachschauen (notfalls per yadd, wenn man noch nicht flashen will)
Der Bootmanager kennt die cam-alpha aus der BN2.01 ganz einfach nicht.
Wichtig ist erstmal: Stimmt die Größe? (131.072 Byte)
Und unter Neutrino -> Service -> Ucodes überprüfen kannst dann nochmal ganz genau nachschauen (notfalls per yadd, wenn man noch nicht flashen will)
-
FlashNash
- Interessierter
- Beiträge: 29
- Registriert: Sonntag 26. Januar 2003, 04:31
@SoLaLa & Dietmar
Um diese Uhrzeit eine Blitzantwort... ich fahr ja ab. Thx an Euch beiden. Dann kann ich nu ja weiterwurschteln. Ich habe mich bisher noch nicht getraut zu flashen da ich mir nicht sicher war ob mein Image bzw. die o.g. Datei okay ist. Die extrahierte Dateigröße stimmt ... 128KB. Nu werde ich es mal mit Yadd versuchen. Danke nochmal für die Hinweise.
Um diese Uhrzeit eine Blitzantwort... ich fahr ja ab. Thx an Euch beiden. Dann kann ich nu ja weiterwurschteln. Ich habe mich bisher noch nicht getraut zu flashen da ich mir nicht sicher war ob mein Image bzw. die o.g. Datei okay ist. Die extrahierte Dateigröße stimmt ... 128KB. Nu werde ich es mal mit Yadd versuchen. Danke nochmal für die Hinweise.
Die Schlauheit des Fuchses besteht zu 99% aus der Dummheit der Hühner.
-
FlashNash
- Interessierter
- Beiträge: 29
- Registriert: Sonntag 26. Januar 2003, 04:31
Ich schon wieder... das habt Ihr nun davon 
Leider muss ich noch einmal die Spezialisten hier bemühen. Also ich habe mal yadd (Rel. 27.01. 2003, 03:06) wie hier beschrieben angewendet. Die Box bootete auch (Display bleibt aber dunkel... it es normal ??), zeigt mir am TV-Screen das Neutrino Bild mit (Neutrino - next generat.on) und bleibt dann stehen. Nix weiter passiert.
Im Logfile (aus Bootmanager und auch aus dem COM-Terminal) werden nun einige ewarnings e und eFehler e angegeben, die ich leider nicht interpretieren kann. Help hatte ich mal eingetippt (siehe Ende des Logfiles) aber auch die darauf erfolge Meldung kann ich nicht interpretieren. Was mache ich falsch ? Kann mir noch einmal bitte auf edie Sprünge e geholfen werden ? Thx schon mal für Eure Mühe und Geduld.
Logfile Bootmanager
***Adapter Desc: Realtek RTL8029(AS) Ethernet Adapt
***MAC address: 00:00:B4:54:00:7A Local IP: 192.168.0.1 (via Packet-Driver #3)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:10:DE:25 (assuming that this is DBox).
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 392 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1265 blocks
1 - mountd: mount: path: C/yadd/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
Logfile COM-Terminal
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID __-__..__.__.__.__.__-__
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.2
debug: Sending TFTP-request for file C/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 200228
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 27 2003 - 01:44:30)
Initializing...
CPU: PPC823ZTnnA at 68 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-10-de-25
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FD2AD8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FD2AD8 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
########################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647341 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (Sinnlos98@ATHLON) (gcc version 3.2) #11 Mon Jan 27 01:44:4
6 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/yadd/c
dkroot/ ip=192.168.0.2:192.168.0.1:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 68 busfreq = 68
WARNING: NEW intfreq = 68000000 busfreq = 68000000
Decrementer Frequency = 255000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 67.58 BogoMIPS
Memory: 30788k available (1136k kernel code, 376k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:10
25
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.2, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.2, domain=, nis-domain=(none),
bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.4 (2003.01.27-00:45+0000) multi-call[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz
loadkeys: /share/keymaps/i386/qwertz/de-latin1.kmap.gz:8: cannot open include fi
le qwertz-layout
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).
mice: PS/2 mouse device common for all mice
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod dvb failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod tuner failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod avia_gt failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod avia_gt_fb failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod avia_gt_oss failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod avia_gt_napi failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod dvb_net failed
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
ln: /dev/dvb/card0/demux1: No such file or directory
ln: /dev/dvb/card0/dvr1: No such file or directory
Please press Enter to activate this console. /dev/dbox/rc0: No such file or dire
ctory
BusyBox v0.60.4 (2003.01.27-00:45+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
sh: can't access tty; job control turned off
~ # help
hier habe ich mal HELP eingetippt
Built-in commands:
-------------------
. : alias bg break builtin cd chdir continue eval exec exit export
false fc fg hash help jobs kill let local pwd read readonly return
set setvar shift times trap true type ulimit umask unalias unset
wait
~ #
Leider muss ich noch einmal die Spezialisten hier bemühen. Also ich habe mal yadd (Rel. 27.01. 2003, 03:06) wie hier beschrieben angewendet. Die Box bootete auch (Display bleibt aber dunkel... it es normal ??), zeigt mir am TV-Screen das Neutrino Bild mit (Neutrino - next generat.on) und bleibt dann stehen. Nix weiter passiert.
Im Logfile (aus Bootmanager und auch aus dem COM-Terminal) werden nun einige ewarnings e und eFehler e angegeben, die ich leider nicht interpretieren kann. Help hatte ich mal eingetippt (siehe Ende des Logfiles) aber auch die darauf erfolge Meldung kann ich nicht interpretieren. Was mache ich falsch ? Kann mir noch einmal bitte auf edie Sprünge e geholfen werden ? Thx schon mal für Eure Mühe und Geduld.
Logfile Bootmanager
***Adapter Desc: Realtek RTL8029(AS) Ethernet Adapt
***MAC address: 00:00:B4:54:00:7A Local IP: 192.168.0.1 (via Packet-Driver #3)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:10:DE:25 (assuming that this is DBox).
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 392 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1265 blocks
1 - mountd: mount: path: C/yadd/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
Logfile COM-Terminal
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID __-__..__.__.__.__.__-__
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.2
debug: Sending TFTP-request for file C/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 200228
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 27 2003 - 01:44:30)
Initializing...
CPU: PPC823ZTnnA at 68 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-10-de-25
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FD2AD8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FD2AD8 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
########################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647341 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (Sinnlos98@ATHLON) (gcc version 3.2) #11 Mon Jan 27 01:44:4
6 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/yadd/c
dkroot/ ip=192.168.0.2:192.168.0.1:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 68 busfreq = 68
WARNING: NEW intfreq = 68000000 busfreq = 68000000
Decrementer Frequency = 255000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 67.58 BogoMIPS
Memory: 30788k available (1136k kernel code, 376k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:10
25D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.2, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.2, domain=, nis-domain=(none),
bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.4 (2003.01.27-00:45+0000) multi-call[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz
loadkeys: /share/keymaps/i386/qwertz/de-latin1.kmap.gz:8: cannot open include fi
le qwertz-layout
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).
mice: PS/2 mouse device common for all mice
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod dvb failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod tuner failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod avia_gt failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod avia_gt_fb failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod avia_gt_oss failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod avia_gt_napi failed
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.19/misc/avia_av.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/avia_av.o: insmod /lib/modules/2.4.19/misc/avia_av.o fa
iled
i2c-core.o: client [DBox2 Frontprocessor client] unregistered.
i2c-core.o: driver unregistered: DBox2 Frontprocessor driver
/lib/modules/2.4.19/misc/avia_av.o: insmod dvb_net failed
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
ln: /dev/dvb/card0/demux1: No such file or directory
ln: /dev/dvb/card0/dvr1: No such file or directory
Please press Enter to activate this console. /dev/dbox/rc0: No such file or dire
ctory
BusyBox v0.60.4 (2003.01.27-00:45+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
sh: can't access tty; job control turned off
~ # help
hier habe ich mal HELP eingetippt
Built-in commands:
-------------------
. : alias bg break builtin cd chdir continue eval exec exit export
false fc fg hash help jobs kill let local pwd read readonly return
set setvar shift times trap true type ulimit umask unalias unset
wait
~ #
Zuletzt geändert von FlashNash am Samstag 1. November 2003, 19:31, insgesamt 1-mal geändert.
Die Schlauheit des Fuchses besteht zu 99% aus der Dummheit der Hühner.
-
FlashNash
- Interessierter
- Beiträge: 29
- Registriert: Sonntag 26. Januar 2003, 04:31
Richtig gesehen, schon wieder ich.......
Bin ja experimentierfreudig und versuche mitzudenken. Habe nun avia500 + avia600 + ca-alpha + ucode nach C:\yadd\cdkroot\var\tuxbox\ucodes kopiert und neu gestartet. Siehe da, es geht viel weiter. Bekomme nun folgende Ergebnisse:
Auf dem Box-Display zunächst Neutrino (auch auf TV), danach im Box-Display eTV Mode DVB e und erhalte dann auf dem Box-Display zur Auswahl: Enigma - Neutrino - LCARS - Maintenance. Habe alle Versionen ausprobiert, bekomme einfach keinen Empfang. Irgendein File fehlt wohl noch, aber welches ?
Wähle ich z.B. Enigma erhalte ich auf dem TV eFirst start of Enigma - Welcome to Enigma e sowie den Hinweis ePlease do a transponder scan ... usw.. Wenn ich auf OK drücke wird das Bild eschwarz e. Drücke ich noch einmal auf OK erhalte ich am unteren Bildschirmrand ein Enigma-Menü mit eEPG - Tonwahl - Tonwahl - Bildregie - Videotext e Egal welche Tasten ich nun drücke, ich bekomme nur ein Service-Menü angezeigt wo ich eDVB-TV Service - DVB Bouquets - Favourites e sehe, komme aber nicht weiter.
Wähle ich z.B. Neutrino so kann ich zwar die Kanalsuche starten, die box findet auch 72 Transponder und 872 Channels, gehe ich danach auf TV-Mode bekomme ich Es wurden keine kanäle gefunden angezeigt. Mit der D-Box-Taste kann ich durch alle Menüs jumpen, die werden alle angezeigt.
Auf die Gefahr, dass Ihr mich für zu blöde haltet muss ich noch einmal um Eure Hilfe bitten. Finde sonst keinen Hinweis (FAQ es + Links ... oder überlesen...) wie es weitergeht. Fehlt mir ev. noch irgendeine (wird im Log ja angemeckert) Datei im yadd-Verzeichnis ? Wenn ja, wo bekomme ich die her ? Google brachte keinen Erfolg
Logfile vom Bootmanager bei Enigma
***MAC address: 00:00:B4:54:00:7A Local IP: 192.168.0.1 (via Packet-Driver #3)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 392 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1265 blocks
1 - mountd: mount: path: C/yadd/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
Logfile aus COM-Terminal bei Enigma
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1025
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.2, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.2, domain=, nis-domain=(none),
bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.4 (2003.01.27-00:45+0000) multi-call[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz
loadkeys: /share/keymaps/i386/qwertz/de-latin1.kmap.gz:8: cannot open include fi
le qwertz-layout
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).
mice: PS/2 mouse device common for all mice
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_event: $Id: avia_av_event.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
write 1 event's ...
write 1 event's ...
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
avia_gt_core: masking unhandled irq reg 0 bit 6
dvb.c: init_dvb
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
VES1893: attaching VES1893 at 0x10 to adapter
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38 2002/10/10 14:49:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.12 2002/10/03 13:32:36 alexw Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_napi: hardware section filtering disabled.
dvb_net: $Id: dvb_net.c,v 1.6 2002/08/12 18:24:05 obi Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
Please press Enter to activate this console. [FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
enigma, Copyright (C) dbox-Project
enigma comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome
to redistribute it under certain conditions.
It is licensed under the GNU General Public License,
Version 2
+ (0) Configuration
+ (1) d-Box LCD Hardware
[LCD] set brightness 130, contrast 32
+ (1) gRC
RC thread createted successfully
+ (1) GFBDC
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
+ (1) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (1) eActionMapList
currentStyle=default
+ (1) RC Input layer
+ (2) skin subsystem
loading skin: /var/tuxbox/config/enigma/skins/default.esml
loading skin: /share/tuxbox/enigma/skins/default.esml
loading skin: stone.esml
failed to load user defined skin stone.esml, falling back to stone.esml
loading skin: /var/tuxbox/config/enigma/skins/stone.esml
loading skin: /share/tuxbox/enigma/skins/stone.esml
illegal color "" specified
[FONT] adding font /share/fonts/bluehigh.ttf...OK (Blue Highway Regular)
[FONT] adding font /share/fonts/bluebold.ttf...OK (Blue Highway Bold)
[FONT] adding font /share/fonts/v5loxicar.ttf...OK (V5 Loxica Robusta)
[FONT] adding font /share/fonts/v5loxical.ttf...OK (V5 Loxica Lixera)
[FONT] adding font /share/fonts/unmrs.pfa...OK (NimbusSansL-Regular Sans L Regul
ar)
fontalias eStatusBar does exist, skip make alias for font Nimbus
fontalias eWindow.TitleBar does exist, skip make alias for font Nimbus
fontalias eWindow.Childs does exist, skip make alias for font Nimbus
fontalias eListBox.EntryText.normal does exist, skip make alias for font Nimbus
fontalias eServiceSelector.Entry.Description does exist, skip make alias for fon
t Nimbus
fontalias eServiceSelector.singleColumn.Entry.Name does exist, skip make alias f
or font Nimbus
fontalias eEPGSelector.Entry.Description does exist, skip make alias for font Ni
mbus
fontalias eEPGSelector.Entry.DateTime does exist, skip make alias for font Nimbu
s
fontalias lcd.main.service_name does exist, skip make alias for font Nimbus
fontalias lcd.main.clock does exist, skip make alias for font Nimbus
fontalias lcd.menu.title does exist, skip make alias for font Nimbus
fontalias lcd.menu.element does exist, skip make alias for font Nimbus
fontalias eventview.description does exist, skip make alias for font Nimbus
fontalias eventview.date does exist, skip make alias for font Nimbus
fontalias eventview.time does exist, skip make alias for font Nimbus
fontalias eventview.channel does exist, skip make alias for font Nimbus
Image with name eCheckbox.checked already loaded, skip checked.png
Image with name eCheckbox.unchecked already loaded, skip unchecked.png
Image with name eComboBox.arrow already loaded, skip combo_arrow.png
Image with name lcd_enigma_logo already loaded, skip enigma2.png
Image with name lcd_menu already loaded, skip lcdmenu.png
Image with name lcd_scart already loaded, skip video.png
Image with name mainmenu.background already loaded, skip mainmenu/background-fs8
.png
Image with name sselect_folder already loaded, skip folder-fs8.png
image/img="shortcut.escape" - /enigma/pictures/shortcut/escape.png: file not fou
nd
+ (2) DreamBox RC Hardware 2
failed to open /dev/dbox/fpkeys0
failed to open /dev/rawir2
+ (2) DreamBox RC Hardware
failed to open /dev/rawir
+ (2) d-Box RC Hardware
+ (3) eSlider
+ (3) number actions
+ (3) eStatusBar
+ (3) cursor actions
+ (3) focus actions
+ (3) list actions
+ (3) shortcut actions
+ (3) eWindow
+ (3) eWidget
+ (3) eProgress
+ (3) eLabel
+ (3) eCheckbox
+ (3) eButton
+ (3) stream watchdog
set event: 00000008
+ (3) rotor menu actions
+ (3) eChannelInfo
+ (4) eDVB lib
[DVBCI] start
[DVBCI] error opening /dev/ci
[DVBCI] module removed
[DVBCI] start
[DVBCI] error opening /dev/ci1
cmdtype = e0, addr = 00, cmd = 00, numParams = 00, params=
[DVBCI] module removed
couldn't read satellite data.. use default
0 lnbs readed
add CAs
count for caids: 0
[eAVSwitch] loading scart-config (scart.conf)
[eAVSwitch] readed scart conf : 3 2 1 0 1 1
[eAVSwitch] readed dvb conf : 5 1 1 0 1 1
[eAVSwitch] setInput 0, avsfd=17
Aratio changed
eDVB::eDVB.
+ (5) eServiceInterface
+ (5) EPG cache
[EPGC] Initialized EPGCache
+ (5) enigma vcr actions
+ (5) timer view actions
+ (5) epg selector actions
+ (5) service selector actions
+ (5) enigma main actions
+ (5) enigma standby actions
+ (5) enigma event view actions
+ (6) eServiceFileHandler
+ (6) eServiceStructureHandler
+ (7) eServicePlaylistHandler
+ (7) eServiceHandlerMP3
+ (7) eServiceHandlerDVB
+ (8) Timer Manager
loading playlist... /var/tuxbox/config/enigma/timer.epl
failed to open.
[eTimerManager] wait for clock update
reached rl 8
[ENIGMA] loading default keymaps...
<-- network
eWindow.titleBar does not exist
<-- service selector
eWindow.titleBar does not exist
[FONT] FTC_Face_Requester (Blue Highway Regular)
eWindow.titleBar does not exist
eWindow.titleBar does not exist
lcdMain created: 0x10283df0
no sapi
loading playlist... /var/tuxbox/config/enigma/favourite.0.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/favourite.1.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/favourite.2.epl
failed to open.
loading playlist... /hdd/movie/recordings.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/playlist.epl
failed to open.
setting mode to 0
<-- eZapMain
<-- pLCD
..
[ENIGMA] starting httpd
[NET] httpd server started on port 80
[ENIGMA] ok, beginning mainloop
eWindow.titleBar does not exist
text is higher
[FONT] FTC_Face_Requester (Blue Highway Bold)
[FONT] creating new font color cache entry ff000000 .. 00ffffff
[eTimerManager] wait for clock update
[FONT] creating new font color cache entry 33294a6b .. 00ffffff
[FONT] creating new font color cache entry 225b7395 .. 00ffffff
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
wait für clock update geht bei Enigma immer so weiter....
Logfile von Neutrino
***Adapter Desc: Realtek RTL8029(AS) Ethernet Adapt
***MAC address: 00:00:B4:54:00:7A Local IP: 192.168.0.1 (via Packet-Driver #3)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:10:DE:25 (assuming that this is DBox).
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 392 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1265 blocks
1 - mountd: mount: path: C/yadd/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
Logfile von Neutrino COM-Terminal
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-cf.4f.d1.06.00.00-5f
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.2
debug: Sending TFTP-request for file C/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 200228
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 27 2003 - 01:44:30)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-10-de-25
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FD2AD8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FD2AD8 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
########################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647341 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (Sinnlos98@ATHLON) (gcc version 3.2) #11 Mon Jan 27 01:44:4
6 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/yadd/c
dkroot/ ip=192.168.0.2:192.168.0.1:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30788k available (1136k kernel code, 376k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1025
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.2, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.2, domain=, nis-domain=(none),
bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.4 (2003.01.27-00:45+0000) multi-callNote: /etc/modu
les.conf is more recent than /lib/modules/2.4.19/modules.dep
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz
loadkeys: /share/keymaps/i386/qwertz/de-latin1.kmap.gz:8: cannot open include fi
le qwertz-layout
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
mice: PS/2 mouse device common for all mice
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_event: $Id: avia_av_event.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
write 1 event's ...
write 1 event's ...
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
dvb.c: init_dvb
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
avia_gt_core: masking unhandled irq reg 0 bit 6
VES1893: attaching VES1893 at 0x10 to adapter
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38 2002/10/10 14:49:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
avia_oss: $Id: avia_gt_oss.c,v 1.12 2002/10/03 13:32:36 alexw Exp $
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_napi: hardware section filtering disabled.
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
dvb_net: $Id: dvb_net.c,v 1.6 2002/08/12 18:24:05 obi Exp $
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
Please press Enter to activate this console. [FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
$Id: sectionsd.cpp,v 1.139 2002/10/15 20:39:47 woglinde Exp $
caching 504 hours
events are old 60min after their end time
[camd] Unknown 1.CMD-Class 03
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.266.2.2 2002/10/28 22:57:18 thegoodguy Exp $
/var/tuxbox/config/zapit/zapit.conf: No such file or directory
[zapit] /var/tuxbox/config/zapit/zapit.conf not found
[getservices.cpp] going to parse satellite Astra 19.2E
[camd] no card is in slot #2
[camd] a card is in slot #1
[zapit] LoadServices: success
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
[zapit] channels have been loaded succesfully
Network LCD-Driver $Id: lcdd.cpp,v 1.57 2002/10/17 10:16:35 thegoodguy Exp $
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
[camd] no card is in slot #2
[camd] a card is in slot #1
Controld $Id: controld.cpp,v 1.76.2.1 2002/10/24 20:34:32 thegoodguy Exp $
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.344 2002/10/16 16:25:24 dirch Exp $
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[CFrontend::setFrontend] freq 1685000
[CPlugins] Dir: /lib/tuxbox/plugins/
[CPlugins] 9 plugins found...
[CFrontend::getEvent] FE_FAILURE_EV
zap failed!
initial zap failed - rezap
[CFrontend::setFrontend] freq 1685000
[CFrontend::getEvent] FE_FAILURE_EV
zap failed!
UND.... ein dickes SORRY an die SQL-datenbank
Bin ja experimentierfreudig und versuche mitzudenken. Habe nun avia500 + avia600 + ca-alpha + ucode nach C:\yadd\cdkroot\var\tuxbox\ucodes kopiert und neu gestartet. Siehe da, es geht viel weiter. Bekomme nun folgende Ergebnisse:
Auf dem Box-Display zunächst Neutrino (auch auf TV), danach im Box-Display eTV Mode DVB e und erhalte dann auf dem Box-Display zur Auswahl: Enigma - Neutrino - LCARS - Maintenance. Habe alle Versionen ausprobiert, bekomme einfach keinen Empfang. Irgendein File fehlt wohl noch, aber welches ?
Wähle ich z.B. Enigma erhalte ich auf dem TV eFirst start of Enigma - Welcome to Enigma e sowie den Hinweis ePlease do a transponder scan ... usw.. Wenn ich auf OK drücke wird das Bild eschwarz e. Drücke ich noch einmal auf OK erhalte ich am unteren Bildschirmrand ein Enigma-Menü mit eEPG - Tonwahl - Tonwahl - Bildregie - Videotext e Egal welche Tasten ich nun drücke, ich bekomme nur ein Service-Menü angezeigt wo ich eDVB-TV Service - DVB Bouquets - Favourites e sehe, komme aber nicht weiter.
Wähle ich z.B. Neutrino so kann ich zwar die Kanalsuche starten, die box findet auch 72 Transponder und 872 Channels, gehe ich danach auf TV-Mode bekomme ich Es wurden keine kanäle gefunden angezeigt. Mit der D-Box-Taste kann ich durch alle Menüs jumpen, die werden alle angezeigt.
Auf die Gefahr, dass Ihr mich für zu blöde haltet muss ich noch einmal um Eure Hilfe bitten. Finde sonst keinen Hinweis (FAQ es + Links ... oder überlesen...) wie es weitergeht. Fehlt mir ev. noch irgendeine (wird im Log ja angemeckert) Datei im yadd-Verzeichnis ? Wenn ja, wo bekomme ich die her ? Google brachte keinen Erfolg
Logfile vom Bootmanager bei Enigma
***MAC address: 00:00:B4:54:00:7A Local IP: 192.168.0.1 (via Packet-Driver #3)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 392 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1265 blocks
1 - mountd: mount: path: C/yadd/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
Logfile aus COM-Terminal bei Enigma
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:10
25D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.2, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.2, domain=, nis-domain=(none),
bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.4 (2003.01.27-00:45+0000) multi-call[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz
loadkeys: /share/keymaps/i386/qwertz/de-latin1.kmap.gz:8: cannot open include fi
le qwertz-layout
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).
mice: PS/2 mouse device common for all mice
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_event: $Id: avia_av_event.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
write 1 event's ...
write 1 event's ...
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
avia_gt_core: masking unhandled irq reg 0 bit 6
dvb.c: init_dvb
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
VES1893: attaching VES1893 at 0x10 to adapter
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38 2002/10/10 14:49:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.12 2002/10/03 13:32:36 alexw Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_napi: hardware section filtering disabled.
dvb_net: $Id: dvb_net.c,v 1.6 2002/08/12 18:24:05 obi Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
Please press Enter to activate this console. [FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
enigma, Copyright (C) dbox-Project
enigma comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome
to redistribute it under certain conditions.
It is licensed under the GNU General Public License,
Version 2
+ (0) Configuration
+ (1) d-Box LCD Hardware
[LCD] set brightness 130, contrast 32
+ (1) gRC
RC thread createted successfully
+ (1) GFBDC
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
+ (1) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (1) eActionMapList
currentStyle=default
+ (1) RC Input layer
+ (2) skin subsystem
loading skin: /var/tuxbox/config/enigma/skins/default.esml
loading skin: /share/tuxbox/enigma/skins/default.esml
loading skin: stone.esml
failed to load user defined skin stone.esml, falling back to stone.esml
loading skin: /var/tuxbox/config/enigma/skins/stone.esml
loading skin: /share/tuxbox/enigma/skins/stone.esml
illegal color "" specified
[FONT] adding font /share/fonts/bluehigh.ttf...OK (Blue Highway Regular)
[FONT] adding font /share/fonts/bluebold.ttf...OK (Blue Highway Bold)
[FONT] adding font /share/fonts/v5loxicar.ttf...OK (V5 Loxica Robusta)
[FONT] adding font /share/fonts/v5loxical.ttf...OK (V5 Loxica Lixera)
[FONT] adding font /share/fonts/unmrs.pfa...OK (NimbusSansL-Regular Sans L Regul
ar)
fontalias eStatusBar does exist, skip make alias for font Nimbus
fontalias eWindow.TitleBar does exist, skip make alias for font Nimbus
fontalias eWindow.Childs does exist, skip make alias for font Nimbus
fontalias eListBox.EntryText.normal does exist, skip make alias for font Nimbus
fontalias eServiceSelector.Entry.Description does exist, skip make alias for fon
t Nimbus
fontalias eServiceSelector.singleColumn.Entry.Name does exist, skip make alias f
or font Nimbus
fontalias eEPGSelector.Entry.Description does exist, skip make alias for font Ni
mbus
fontalias eEPGSelector.Entry.DateTime does exist, skip make alias for font Nimbu
s
fontalias lcd.main.service_name does exist, skip make alias for font Nimbus
fontalias lcd.main.clock does exist, skip make alias for font Nimbus
fontalias lcd.menu.title does exist, skip make alias for font Nimbus
fontalias lcd.menu.element does exist, skip make alias for font Nimbus
fontalias eventview.description does exist, skip make alias for font Nimbus
fontalias eventview.date does exist, skip make alias for font Nimbus
fontalias eventview.time does exist, skip make alias for font Nimbus
fontalias eventview.channel does exist, skip make alias for font Nimbus
Image with name eCheckbox.checked already loaded, skip checked.png
Image with name eCheckbox.unchecked already loaded, skip unchecked.png
Image with name eComboBox.arrow already loaded, skip combo_arrow.png
Image with name lcd_enigma_logo already loaded, skip enigma2.png
Image with name lcd_menu already loaded, skip lcdmenu.png
Image with name lcd_scart already loaded, skip video.png
Image with name mainmenu.background already loaded, skip mainmenu/background-fs8
.png
Image with name sselect_folder already loaded, skip folder-fs8.png
image/img="shortcut.escape" - /enigma/pictures/shortcut/escape.png: file not fou
nd
+ (2) DreamBox RC Hardware 2
failed to open /dev/dbox/fpkeys0
failed to open /dev/rawir2
+ (2) DreamBox RC Hardware
failed to open /dev/rawir
+ (2) d-Box RC Hardware
+ (3) eSlider
+ (3) number actions
+ (3) eStatusBar
+ (3) cursor actions
+ (3) focus actions
+ (3) list actions
+ (3) shortcut actions
+ (3) eWindow
+ (3) eWidget
+ (3) eProgress
+ (3) eLabel
+ (3) eCheckbox
+ (3) eButton
+ (3) stream watchdog
set event: 00000008
+ (3) rotor menu actions
+ (3) eChannelInfo
+ (4) eDVB lib
[DVBCI] start
[DVBCI] error opening /dev/ci
[DVBCI] module removed
[DVBCI] start
[DVBCI] error opening /dev/ci1
cmdtype = e0, addr = 00, cmd = 00, numParams = 00, params=
[DVBCI] module removed
couldn't read satellite data.. use default
0 lnbs readed
add CAs
count for caids: 0
[eAVSwitch] loading scart-config (scart.conf)
[eAVSwitch] readed scart conf : 3 2 1 0 1 1
[eAVSwitch] readed dvb conf : 5 1 1 0 1 1
[eAVSwitch] setInput 0, avsfd=17
Aratio changed
eDVB::eDVB
.+ (5) eServiceInterface
+ (5) EPG cache
[EPGC] Initialized EPGCache
+ (5) enigma vcr actions
+ (5) timer view actions
+ (5) epg selector actions
+ (5) service selector actions
+ (5) enigma main actions
+ (5) enigma standby actions
+ (5) enigma event view actions
+ (6) eServiceFileHandler
+ (6) eServiceStructureHandler
+ (7) eServicePlaylistHandler
+ (7) eServiceHandlerMP3
+ (7) eServiceHandlerDVB
+ (8) Timer Manager
loading playlist... /var/tuxbox/config/enigma/timer.epl
failed to open.
[eTimerManager] wait for clock update
reached rl 8
[ENIGMA] loading default keymaps...
<-- network
eWindow.titleBar does not exist
<-- service selector
eWindow.titleBar does not exist
[FONT] FTC_Face_Requester (Blue Highway Regular)
eWindow.titleBar does not exist
eWindow.titleBar does not exist
lcdMain created: 0x10283df0
no sapi
loading playlist... /var/tuxbox/config/enigma/favourite.0.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/favourite.1.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/favourite.2.epl
failed to open.
loading playlist... /hdd/movie/recordings.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/playlist.epl
failed to open.
setting mode to 0
<-- eZapMain
<-- pLCD
..
[ENIGMA] starting httpd
[NET] httpd server started on port 80
[ENIGMA] ok, beginning mainloop
eWindow.titleBar does not exist
text is higher
[FONT] FTC_Face_Requester (Blue Highway Bold)
[FONT] creating new font color cache entry ff000000 .. 00ffffff
[eTimerManager] wait for clock update
[FONT] creating new font color cache entry 33294a6b .. 00ffffff
[FONT] creating new font color cache entry 225b7395 .. 00ffffff
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
[eTimerManager] wait for clock update
wait für clock update geht bei Enigma immer so weiter....
Logfile von Neutrino
***Adapter Desc: Realtek RTL8029(AS) Ethernet Adapt
***MAC address: 00:00:B4:54:00:7A Local IP: 192.168.0.1 (via Packet-Driver #3)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:10:DE:25 (assuming that this is DBox).
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 392 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\yadd\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\yadd\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1265 blocks
1 - mountd: mount: path: C/yadd/cdkroot/
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
Logfile von Neutrino COM-Terminal
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-cf.4f.d1.06.00.00-5f
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.2
debug: Sending TFTP-request for file C/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 200228
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 27 2003 - 01:44:30)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-10-de-25
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FD2AD8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FD2AD8 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.2
Filename 'C/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
########################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647341 Bytes = 632 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19 (Sinnlos98@ATHLON) (gcc version 3.2) #11 Mon Jan 27 01:44:4
6 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:C/yadd/c
dkroot/ ip=192.168.0.2:192.168.0.1:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30788k available (1136k kernel code, 376k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:10
25D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.2, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.2, domain=, nis-domain=(none),
bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.4 (2003.01.27-00:45+0000) multi-callNote: /etc/modu
les.conf is more recent than /lib/modules/2.4.19/modules.dep
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz
loadkeys: /share/keymaps/i386/qwertz/de-latin1.kmap.gz:8: cannot open include fi
le qwertz-layout
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 1).
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
mice: PS/2 mouse device common for all mice
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
avia_av_event: $Id: avia_av_event.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
write 1 event's ...
write 1 event's ...
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
dvb.c: init_dvb
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
avia_gt_core: masking unhandled irq reg 0 bit 6
VES1893: attaching VES1893 at 0x10 to adapter
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38 2002/10/10 14:49:33 Jolt Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
avia_oss: $Id: avia_gt_oss.c,v 1.12 2002/10/03 13:32:36 alexw Exp $
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_napi: hardware section filtering disabled.
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
dvb_net: $Id: dvb_net.c,v 1.6 2002/08/12 18:24:05 obi Exp $
Note: /etc/modules.conf is more recent than /lib/modules/2.4.19/modules.dep
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
Please press Enter to activate this console. [FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
$Id: sectionsd.cpp,v 1.139 2002/10/15 20:39:47 woglinde Exp $
caching 504 hours
events are old 60min after their end time
[camd] Unknown 1.CMD-Class 03
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.266.2.2 2002/10/28 22:57:18 thegoodguy Exp $
/var/tuxbox/config/zapit/zapit.conf: No such file or directory
[zapit] /var/tuxbox/config/zapit/zapit.conf not found
[getservices.cpp] going to parse satellite Astra 19.2E
[camd] no card is in slot #2
[camd] a card is in slot #1
[zapit] LoadServices: success
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
[zapit] channels have been loaded succesfully
Network LCD-Driver $Id: lcdd.cpp,v 1.57 2002/10/17 10:16:35 thegoodguy Exp $
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
/var/tuxbox/config/lcdd.conf: No such file or directory
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
[camd] no card is in slot #2
[camd] a card is in slot #1
Controld $Id: controld.cpp,v 1.76.2.1 2002/10/24 20:34:32 thegoodguy Exp $
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.344 2002/10/16 16:25:24 dirch Exp $
[neutrino] frameBuffer Instance created
[neutrino] vcrControl Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[CFrontend::setFrontend] freq 1685000
[CPlugins] Dir: /lib/tuxbox/plugins/
[CPlugins] 9 plugins found...
[CFrontend::getEvent] FE_FAILURE_EV
zap failed!
initial zap failed - rezap
[CFrontend::setFrontend] freq 1685000
[CFrontend::getEvent] FE_FAILURE_EV
zap failed!
UND.... ein dickes SORRY an die SQL-datenbank
Zuletzt geändert von FlashNash am Dienstag 28. Januar 2003, 09:21, insgesamt 1-mal geändert.
Die Schlauheit des Fuchses besteht zu 99% aus der Dummheit der Hühner.
-
FlashNash
- Interessierter
- Beiträge: 29
- Registriert: Sonntag 26. Januar 2003, 04:31
Wer wohl, noch immer ich....
SORRY für das vollpumpen der SQL ... nach einem kompletten reboot des PC und der Box habe ich plötzlich unter Neutrino eBilder e
Seltsamerweise kein Empfang von Premiere obwohl ich die Kanäle in der Kanalliste sehe und anwählen kann. Habs mit meiner Abokarte und mit der des Nachbarn ausprobiert. Nix wird angezeigt. Wahrscheinlich bin ich nur zu blöde und sollte mir ein anderes Hobby wie z.B. Angeln suchen. kann mir bitte weitergeholfen werden ? Die Kanäle habe ich von der Box suchen lassen, nur zur Information.
SORRY für das vollpumpen der SQL ... nach einem kompletten reboot des PC und der Box habe ich plötzlich unter Neutrino eBilder e
Seltsamerweise kein Empfang von Premiere obwohl ich die Kanäle in der Kanalliste sehe und anwählen kann. Habs mit meiner Abokarte und mit der des Nachbarn ausprobiert. Nix wird angezeigt. Wahrscheinlich bin ich nur zu blöde und sollte mir ein anderes Hobby wie z.B. Angeln suchen. kann mir bitte weitergeholfen werden ? Die Kanäle habe ich von der Box suchen lassen, nur zur Information.
Die Schlauheit des Fuchses besteht zu 99% aus der Dummheit der Hühner.
-
FlashNash
- Interessierter
- Beiträge: 29
- Registriert: Sonntag 26. Januar 2003, 04:31
Wer wohl sonst... natürlich ich
habe grad selber mal meine Signatur gelesen .... gehöre wohl eher zu den Hühnern.
Nun habe ich auf allen FTA Kanälen ein Bild. Bei Premiere erhalte ich auf den Kanälen EPG es aber kein Bild/Ton. Wat nu ? Ich habe fertig ...
habe grad selber mal meine Signatur gelesen .... gehöre wohl eher zu den Hühnern.
Nun habe ich auf allen FTA Kanälen ein Bild. Bei Premiere erhalte ich auf den Kanälen EPG es aber kein Bild/Ton. Wat nu ? Ich habe fertig ...
Die Schlauheit des Fuchses besteht zu 99% aus der Dummheit der Hühner.
-
FlashNash
- Interessierter
- Beiträge: 29
- Registriert: Sonntag 26. Januar 2003, 04:31
Ehrlich... das letzte Posting zu dem Problem
Nu habe ich via yadd alles runnen. Zu blöde aber auch, die Karte hatte wohl keinen richtigen Kontakt im Schacht gehabt. Oder der Reboot (PC+Box) hat es gebracht... offen gestanden ... kein Schimmer.
Nu habe ich ein Bild und ev. mich bis auf die Knochen blamiert. Macht aber nix, mich kennt ja keiner.
Komme wieder, wenn ich geflasht habe und das Elend von neuen los geht
So... ich habe endgültig fertig ... wie Flasche leer
Nu habe ich via yadd alles runnen. Zu blöde aber auch, die Karte hatte wohl keinen richtigen Kontakt im Schacht gehabt. Oder der Reboot (PC+Box) hat es gebracht... offen gestanden ... kein Schimmer.
Nu habe ich ein Bild und ev. mich bis auf die Knochen blamiert. Macht aber nix, mich kennt ja keiner.
Komme wieder, wenn ich geflasht habe und das Elend von neuen los geht
So... ich habe endgültig fertig ... wie Flasche leer
Die Schlauheit des Fuchses besteht zu 99% aus der Dummheit der Hühner.