Dbox2Router Image 2.3.0 zeigt ständig "BOOTING" an

[BlueAngel]

Hab e meine Sagem-Dbox2 mit dem Router Image 2.3.0. erfolgreich geflasht, sie routet auch wunderbar, aber bei Neutrino gibts Probleme:

1. Auf dem LC-Display verschwindet die Ausgabe "BOOTING" gar nicht und ( keine Ahnung, ob es damit zusammenhängt ), sobald ich neue "services.xml" und Co. aufspiele, fordert mich die Box einen neuen Sat-Scan durchzuführen, der dann überhaupt nicht klappt. Erst nach dem Aufspielen des originalen Router-Images 2.3.0 kann ich zwischen den Sendern schalten ( bin auf die dort enthaltene "services.xml" angewiesen ).

2. Auch wenn ich die Bouquets unter Neutrino bearbeite, verliert die Box alle Kanäle und fordert mich die Box neuen Sat-Scan durchzuführen. Aufspielen neuer "services.xml" und Co. bringt keine Abhilfe.

Kann mir einer helfen ? Gibt es Foren / Sites, die sich nur mit dem Dbox2Router befassen ?

HILFE !!!

[SoLaLa]

post mal das bootlog (siehe FAQbereich )

[BlueAngel]

O.K - hab e hier zwei BootLogs:

1. Mit dem original Router-Image 2.3.0, ( habe nur der "rc.conf" meine Zugangsdaten verpasst und die "Ucodes" hochgeladen - sonst nichts )

2. BootLog nach dem aufspielen der "services.xml" und der "bouquets.xml" ( beide Dateien sind aktuell - Quelle: dbox2.info )

Beim zweiten BootLog bleibt die Box an der Stelle stehen, wo das Log endet ( Router geht ! ).
Nebenbei: das aktuelle Image von alexW macht auf der Box keine Probleme !

Hier das 1. BootLog:

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-95.c2.ba.07.00.00-36
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 208788
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 30 2002 - 17:47:25)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .. .
LCD: ready
FB: find_inode failed for name=logo-fb
load: Failed to find inode
can't find logo in flash - no init
In: serial
Out: serial
Err: serial

Options:
1: kernelconsole on ttyS0
2: kernelconsole on fb0
3: kernelconsole on null
Select option (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 712216 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 712152 Bytes = 695 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (fbn@fblin1) (gcc version 2.95.3 20010315 (release))
#5 Fri Jan 24 16:34:24 CET 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30500k available (1332k kernel code, 468k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:31:b6:75
PPP generic driver version 2.4.2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
Creating 4 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "jffs2"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
ip_conntrack version 2.1 (256 buckets, 2048 max) - 292 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.2 (2002.04.27-13:50+0000) multi-call rcS starting.
Mounting filesystems
Loading kernel modules
Setting up ramfs
Setting hostname
Setting up Internet connection parameters
Setting up loopback device
Setting up eth0
Starting pppd
Setting up LAN domain
Starting imond
Setting up masquerading and firewall
Starting portmap
Starting inetd
Starting pure-ftpd
Starting sshd
Setting up samba client
Loading modules
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
event: init ...
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 0
).
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 3
Running /etc/init.d/rc.custom.postnetwork
DEMOD: VES1993
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 1).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 2).
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
avia_gt_core: $Id: avia_gt_core.c,v 1.20 2002/06/07 14:00:23 tmbinc Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.11 2002/06/07 17:53:45 Jolt Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.91 2002/07/08 15:12:47 wjoost Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: RISC mem map size: 2048
ENX-INITed -> 0
there MIGHT be no TS
avia_gt_gv: $Id: avia_gt_gv.c,v 1.21 2002/07/21 15:16:22 waldi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.14 2002/06/07 18:06:03 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.21 2002/08/06 13:06:30 wjoost Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.27 2002/08/06 13:06:30 wjoost Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.18 2002/06/07 18:06:03 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
i2c-core.o: driver VES1993 DVB DECODER registered.
i2c-core.o: client [VES1993] registered to adapter [](pos. 4).
i2c-core.o: driver sp5659/tsa5059 tuner driver registered.
i2c-core.o: client [DBox2 Tuner Driver] registered to adapter [](pos. 5).
VES1993: sp5659 tuner found
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.35 2002/08/11 13:07:34 waldi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.6 2002/05/06 02:18:18 obi Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.89 2002/06/11 20:35:43 Jolt Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.15 2002/07/02 09:31:22 LazyT Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
DVBTime 1.0
Trying 12343H SR 27500 FEC 3/4 diseqc 0 (ASTRA1 19.2E)
Tuning successful.
Waiting for date...Fri Feb 7 11:31:41 CET 2003
$Id: zapit.cpp,v 1.193 2002/07/22 01:57:19 Homar Exp $

[getservices.cpp] going to parse satellite Astra 19.2E
[zapit] reading Bouquets .............................................
[zapit] Found 46 bouquets.
[zapit] channels have been loaded succesfully
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
[camd] ca system id: 1702
set event: 00000009
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[CFrontend::getEvent] FE_COMPLETION_EV
sid 31c4, vpid 004d, apid 004e, pcr 004d, pmt 0097
avia_core.c: avia_interrupt: Reserved 01.
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok
[cat.c] read: Connection timed out









Hier das 2. BootLog:

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-95.c2.ba.07.00.00-36
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 208788
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 30 2002 - 17:47:25)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .. .
LCD: ready
FB: find_inode failed for name=logo-fb
load: Failed to find inode
can't find logo in flash - no init
In: serial
Out: serial
Err: serial

Options:
1: kernelconsole on ttyS0
2: kernelconsole on fb0
3: kernelconsole on null
Select option (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 712216 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 712152 Bytes = 695 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (fbn@fblin1) (gcc version 2.95.3 20010315 (release))
#5 Fri Jan 24 16:34:24 CET 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30500k available (1332k kernel code, 468k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:31:b6:75
PPP generic driver version 2.4.2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
Creating 4 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "jffs2"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
ip_conntrack version 2.1 (256 buckets, 2048 max) - 292 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
init started: BusyBox v0.60.2 (2002.04.27-13:50+0000) multi-call rcS starting.
Mounting filesystems
Loading kernel modules
Setting up ramfs
Setting hostname
Setting up Internet connection parameters
Setting up loopback device
Setting up eth0
Starting pppd
Setting up LAN domain
Starting imond
Setting up masquerading and firewall
Starting portmap
Starting inetd
Starting pure-ftpd
Starting sshd
Setting up samba client
Loading modules
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
event: init ...
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 0
).
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 3
Running /etc/init.d/rc.custom.postnetwork
DEMOD: VES1993
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 1).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 2).
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
avia_gt_core: $Id: avia_gt_core.c,v 1.20 2002/06/07 14:00:23 tmbinc Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.11 2002/06/07 17:53:45 Jolt Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.91 2002/07/08 15:12:47 wjoost Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: RISC mem map size: 2048
ENX-INITed -> 0
there MIGHT be no TS
avia_gt_gv: $Id: avia_gt_gv.c,v 1.21 2002/07/21 15:16:22 waldi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.14 2002/06/07 18:06:03 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.21 2002/08/06 13:06:30 wjoost Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.27 2002/08/06 13:06:30 wjoost Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.18 2002/06/07 18:06:03 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
i2c-core.o: driver VES1993 DVB DECODER registered.
i2c-core.o: client [VES1993] registered to adapter [](pos. 4).
i2c-core.o: driver sp5659/tsa5059 tuner driver registered.
i2c-core.o: client [DBox2 Tuner Driver] registered to adapter [](pos. 5).
VES1993: sp5659 tuner found
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.35 2002/08/11 13:07:34 waldi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.6 2002/05/06 02:18:18 obi Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.89 2002/06/11 20:35:43 Jolt Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.15 2002/07/02 09:31:22 LazyT Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
DVBTime 1.0
Trying 12343H SR 27500 FEC 3/4 diseqc 0 (ASTRA1 19.2E)
Tuning successful.
Waiting for date...Fri Feb 7 11:35:11 CET 2003
$Id: zapit.cpp,v 1.193 2002/07/22 01:57:19 Homar Exp $

[getservices.cpp] going to parse satellite Astra 19.2E
Segmentation fault
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
[camd] no card is in slot #2
[camd] no card is in slot #1
[camd] ca system id: 1702
set event: 00000009
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)[/quote]

[Gliddie]

Habe das Problem auch.
Außerdem, wenn ich Sendersuchlauf mache, sucht sich meine Box tot.
(Habe vorher die serv*.xml, bouq*.xml, zap*.conf und scan*.conf) gelöscht.

Gruß
Gliddie