Hallo,brauche dringend Hilfe! Habe meine Philips Sat Box 2 versucht zu flashen!
Dabei ist anscheinend was schief gelaufen!
Habe das über Netzwerk versucht!
Ich habe die cdk.cramfs (v. 18.02.03) sowie das AlexW 1.6.8 Image zur Box gesendet und dann manuell geupdatet!
Sah auch ganz gut aus!
Dann kam reboot, die Box kommt noch bis zum Linux Schriftzug im Display, dann wird es dunkel und es leuchtet nur noch ganz schwach im Hintergrund!
Hier mal das serielle Log! Ich hoffe ich hab das richtig gemacht!
- ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Die Dez 31 18:36:38 CET 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30816k available (1120k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2b:49:6c
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUpdate altes Ba
seimage...
Update auf Baseimage V1.6.2...
rm: cannot remove `/var/tuxbox/config/lcdmenu.conf': No such file or directory
rm: cannot remove `/var/tuxbox/start_neutrino': No such file or directory
cp: unable to open `/var/tuxbox/config/lcdmenu.conf': No space left on device
touch: /var/etc/.v1.6.2: No space left on device
touch: /var/etc/.v1.6.3: No space left on device
rm: cannot remove `/var/tuxbox/start_neutrino': No such file or directory
rm: cannot remove `/var/tuxbox/start_enigma': No such file or directory
rm: cannot remove `/var/tuxbox/start_lcars': No such file or directory
ln: /var/tuxbox/start_neutrino: No space left on device
ln: /var/tuxbox/start_enigma: No space left on device
ln: /var/tuxbox/start_lcars: No space left on device
touch: /var/etc/.v1.6.4: No space left on device
rm: cannot remove `/var/tuxbox/config/cables.xml': No such file or directory
rm: cannot remove `/var/tuxbox/config/satellites.xml': No such file or directory
mkdir: Cannot create directory /var/tuxbox/config/tuxnews: No space left on devi
ce
cp: unable to open `/var/tuxbox/config/tuxnews': No space left on device
touch: /var/etc/.v1.6.5: No space left on device
rm: cannot remove `/var/tuxbox/start_neutrino': No such file or directory
rm: cannot remove `/var/tuxbox/start_enigma': No such file or directory
rm: cannot remove `/var/tuxbox/start_lcars': No such file or directory
ln: /var/tuxbox/start_neutrino: No space left on device
ln: /var/tuxbox/start_enigma: No space left on device
ln: /var/tuxbox/start_lcars: No space left on device
touch: /var/etc/.v1.6.6: No space left on device
ln: /var/tmp: No space left on device
touch: /var/etc/.v1.6.7: No space left on device
touch: /var/etc/.v1.6.8: No space left on device
Using /lib/modules/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20/misc/dmxdev.o
write 1 event's ...2.4.20/misc/dvb_frontend.o
write 1 event's ...
via_gt.o
Using /lib/modules/2.4.20/misc/aav
a$iacot_: red:$Ivi agta_or_cc,e.1.v 2222/00/109223 3::5 J55t olp Ex
a_vi_cgte:orut aetodtiec cngp hipety. ..iAAVNX eou f
a$iaavt__gx:enId $av: _giaent_c,x.1.v 2132/00/009192 5::2 J37t olp Ex
a_vi_agtelcc$I: ad:a_vi_agtelcc,v.c.6 100 2092/9 /1:021209:ol JExt $
agta_mx_d$I: ad:a_vi_dgt.cmx 1,v34.100 2092/1 /2:000080:ol JExt $ p vi
E7ta_mx_dSu: escculsf llydeoaucd e od1.VB p vi
-INXTeNI->d
0erthMIe T GH nbeTSo (
agta_mx_dwa: inrn mg,alisneigqud e eu(i0 0xs A032 s0,e iz5365, 6)igalngni.
agta_v:_gId $av: _giagvt_,v.c.2 1202 /002228/3: 1:339Jo3 Elt $xpav ..vi
_giagvt_se: int_t_puzesiwi (h=dt0,72ei ht=gh6)57av
_giapct_ $m:: Idiaavt__gm.pcv c,181.00 2092/5 /2:518520:ol JExt $
agta_ap_cretu$I: ad:a_vi_cgttuap.cre 1,v2 .202208//0 122393:3 :3ltJoxp E
a$iaavt__gg:piId $av: _giapit_c,g.1.v 2282/00/208132 9::3 J33t olp Ex
a_vi_igt $r:: Idiaavt__g.cir 1,v9 .102208//0 122393:3 :3ltJoxp E
$iaavt__grecoLo: edadVi AeNA GTX/drX erivUsing /lib/modules/2.4.20/misc/dv
.cvbin: _dit
vb
Using /lib/modules/2.4.20/misc/tInit TDA8044H
-c2ce.or do:veriTDr 04A8 D4H DVBODEC rERisegrete
d.a8td4h04: .ctaatinchTDg 04A8 a4H0xt
d0c-i2reco: .oiecl [ntA8TD4H04re] stgiedero tapadr te(p[]. os.
Using /lib/modules/2.4.20/misc/aav 4)via_gt_napi.o
_gianat_: pid:$Ivi agta_ap_nc,i.1.v 0 1302209//0 118575:4 :2ltJoxp E
$iaavt__gpinaha: ward sretiec fonteilngriis dleab
Using /lib/modules/2.4.20/misc/avvi
agta_bi_v$I: ad:a_vi_vgt.cbi 1,v6 .102208//0
122393:3 :3ltJoxp E
$iaavt__gi:vbot gem d Cuxub-C- e iAAVNX eTX/GUsing /lib/modules/2.4.20/misc/av
a_vi_fgt $b:: Idiaavt__g_cfbe.orv c,361.00 2082/2 /2:313339:ol JExt $
agta_v:_get snp_i_mute odod(m2)e=av p vi
_giagvt_se: int_t_puzesiwi (h=dt0,72ei ht=gh6)57av
a)iagvt_se: int_t_pudemomo (=2de
a)a_vi_ggt sv:_ietutnpiz_s(we thid20=7he, htig76=5
a_vi_ggt sv:_ietutnpod_m(me e=od
2)iaavt__g: gvt_sepuinsit_ (zedtwi72h= h0,ghei57t=
6)nsCoe:olwi shitc tngcoo urlora f bmefeufder cevi2x 8
Using /lib/modules/2.4.20/misc/ae ebamfeuffrr e amffbu dericev
Using /lib/modules/2.4.20/misc/a$2112/00/209185 0::5 J52t olp Ex
Using /lib/modules/2.4.20/misc/l$1,v 2.42/00/208132 9::3 J33t olp Ex
lelc io:t nid lcivdr merulod /etc/init.d/rcS: cd.o
/var/tuxbox/start_neutrino: No s2derntcefan o
his console. irectory
Please press Enter to activate t
Was muß ich tun????
Scree