Völlig ratlos!!! Fläschen schlägt fehl

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Ducky
Beiträge: 2
Registriert: Samstag 8. März 2003, 13:07

Völlig ratlos!!! Fläschen schlägt fehl

Beitrag von Ducky »

Ich bekomme diese meldung immer wen ich das neue image flaschen will. das logo schaft er ja noch ins display aber dann......
Dbox nokia 2 / Kabel/ alexw2x1.6.3

_____________________________________________________________
Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\kernel-cdk"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
_____________________________________________________________

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID ++
debug: fpID 5a dsID 01-++++++++++++++++
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 1+++++++++.4, My IP +++++++136.3
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.136.4; our IP address is 192.168.136.3
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.136.4; our IP address is 192.168.136.3
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server +++++++6.4; our IP address is ++++++3ilename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T
da bleibt er hängen und versucht es immer wieder
Zuletzt geändert von Ducky am Montag 10. März 2003, 21:04, insgesamt 2-mal geändert.
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

There are 10 types of people in the world: those who know binary and those who don't