Privat-Kabel mit Sateinspeisung

Beitrag von **Homar** » Samstag 22. März 2003, 13:17

Hi Folks,

Bitte mal testen:

HTTP://remote-admin.info

yadd-test.tar.gz

Beitrag von **Crusader67** » Samstag 22. März 2003, 19:06

BruteForce bricht ab

[frontend.cpp:getEvent:248] event after 1 milliseconds
[frontend.cpp:getEvent:248] event after 2099 milliseconds
[frontend.cpp:getEvent:263] FE_TIMEDOUT
[scan.cpp:start_scanthread:466] start_scanthread: add transponder
[scan.cpp:add_transponder:83] add_transponder
[frontend.cpp:setFrontend:196] feparams->frequency: 466000000
[frontend.cpp:setFrontend:197] feparams->inversion: h
[frontend.cpp:setFrontend:198] feparams->u.qam.symbol_rate: 6875000
[frontend.cpp:setFrontend:199] feparams->u.qam.fec_inner: 9
[frontend.cpp:setFrontend:200] feparams->u.qam.modulation: 6
[frontend.cpp:setFrontend:202] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid arg
ument
[frontend.cpp:getEvent:248] event after 9 milliseconds
[frontend.cpp:getEvent:248] event after 2098 milliseconds
[frontend.cpp:getEvent:263] FE_TIMEDOUT
[scan.cpp:start_scanthread:466] start_scanthread: add transponder
[scan.cpp:add_transponder:83] add_transponder
[frontend.cpp:setFrontend:196] feparams->frequency: 474000000
[frontend.cpp:setFrontend:197] feparams->inversion: h
[frontend.cpp:setFrontend:198] feparams->u.qam.symbol_rate: 6875000
[frontend.cpp:setFrontend:199] feparams->u.qam.fec_inner: 9
[frontend.cpp:setFrontend:200] feparams->u.qam.modulation: 6
[frontend.cpp:setFrontend:202] ioctl(fd, FE_SET_FRONTEND, feparams): Invalid arg
ument
[frontend.cpp:getEvent:248] event after 1 milliseconds
[frontend.cpp:getEvent:248] event after 2099 milliseconds
[frontend.cpp:getEvent:263] FE_TIMEDOUT
[scan.cpp:write_provider:326] write_provider
[bouquets.cpp:saveBouquets:182] creating new bouquets.xml
[scan.cpp:start_scanthread:532] found 1 transponders and 0 channels
[scan.cpp:stop_scan:64] stop_scan
[getservices.cpp:FindTransponder:160] going to parse dvb-c provider cable brutef
orce
[zapit.cpp:prepare_channels:539] LoadServices: success
[xmlinterface.cpp:parseXmlFile:176] Error parsing "/var/tuxbox/config/zapit/bouq
uets.xml": no element found at line 1
[sectionsd] getUTC: read: Connection timed out

DB2 Nokia Avia500 Kabel

Beitrag von **mehly** » Montag 31. März 2003, 22:18

Damit hat er die Sender bei mir gefunden. Ich hoffe es hilft.

<cable name="EWT" satfeed="true">
<transponder frequency="346000000" symbol_rate="6875000" fec_inner="0" modulation="3"/>
<transponder frequency="354000000" symbol_rate="6875000" fec_inner="0" modulation="3"/>
<transponder frequency="362000000" symbol_rate="6875000" fec_inner="0" modulation="3"/>
<transponder frequency="378000000" symbol_rate="6875000" fec_inner="0" modulation="3"/>
<transponder frequency="386000000" symbol_rate="6875000" fec_inner="0" modulation="3"/>
<transponder frequency="394000000" symbol_rate="6875000" fec_inner="0" modulation="3"/>
<transponder frequency="402000000" symbol_rate="6875000" fec_inner="0" modulation="3"/>
<transponder frequency="410000000" symbol_rate="6875000" fec_inner="0" modulation="3"/>
<transponder frequency="418000000" symbol_rate="6875000" fec_inner="0" modulation="3"/>
</cable>

Beitrag von **Homar** » Montag 31. März 2003, 22:21

@mehly: thx für das feedback...

btw. satfeed ist egal, weil nicht mehr ausgewertet wird

Beitrag von **mehly** » Montag 31. März 2003, 22:26

Kein Problem ;-)

Hab zwar keine Ahnung was die Sachen anstellen.

Ich weiß nur das die Inversion an sein muß.

mit flags=9 hat er nix gefunden.

Mußte aber einmal rebooten nachdem er die sender gefunden hatte sonst kein bild.

Ein Lob an deine Arbeit mit den Yadds, ich unterstütze da gerne ;-)

Beitrag von **Homar** » Montag 31. März 2003, 22:31

kannste mir dein log uploaden ??

Beitrag von **mehly** » Montag 31. März 2003, 22:43

----------------------------------------------------------------------
cut here
----------------------------------------------------------------------

Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2E80 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.6.66; our IP address is 192.168.6.42
Filename 'C/Programme/DBoxBoot/cdk/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #######

FB logo at: 0x0 (0x1FD2E80 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
nokia bmon 1.0
debug mode is enabled
BOOTP broadcast 1
TFTP from server 192.168.6.66; our IP address is 192.168.6.42
Filename 'C/Programme/DBoxBoot/cdk/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
#######################################################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 722649 Bytes = 705 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (Sinnlos98@athlon) (gcc version 3.2.2) #19 Sat Mar 22
02:07:23 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.6.66:C/Progr
amme/DBoxBoot/cdk/cdkroot/ ip=192.168.6.42:192.168.6.66:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30632k available (1256k kernel code, 404k data, 76k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:18:82:3f
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.6.42, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.6.42, domain=, nis-domain=(none),
bootserver=192.168.6.66, rootserver=192.168.6.66, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Looking up port of RPC 100003/2 on 192.168.6.66
Looking up port of RPC 100005/1 on 192.168.6.66
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 76k init
init started: BusyBox v0.61.pre (2003.03.20-23:42+0000) multi-caDetected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
event: init ...
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](pos
. 1).
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 2).
$Id: cam.c,v 1.22 2003/01/14 10:26:36 jolt Exp $
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [PowerPC 8xx I2C adapter](p
os. 3).
CAM: attached to adapter PowerPC 8xx I2C adapter
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_av: $Id: avia_av_core.c,v 1.60 2003/03/13 21:04:21 wjoost Exp $
avia_av_event: $Id: avia_av_event.c,v 1.5 2003/01/02 05:26:43 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.4 2003/01/02 05:26:43 obi Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.34 2003/03/08 09:16:41 waldi Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.19 2003/01/11 22:45:16 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.15 2003/01/14 23:59:32 jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
write 1 event's ...
write 1 event's ...
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.164 2003/03/09 17:47:34 wjoost Exp $
avia_gt_dmx: Successfully loaded ucode vB107
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.29 2003/03/03 20:52:45 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.22 2003/01/11 22:45:16 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.26 2003/01/11 22:45:16 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.34 2003/01/11 22:45:16 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.22 2003/01/11 22:45:16 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.21 2003/01/11 22:45:16 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.44 2003/03/05 03:38:45 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.6 2003/01/02 05:26:43 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.16 2003/01/11 22:45:16 obi Exp $
Linux video capture interface: v1.00
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.7 2003/01/11 22:45:16 obi Exp $
$Id: avia_napi.c,v 1.12 2003/01/18 00:52:35 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
i2c-core.o: driver DVB I2C bridge registered.
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
VES1x93 not found (identity 11)
i2c-core.o: client [dvb] registered to adapter [PowerPC 8xx I2C adapter](pos. 4)
.
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.5 2003/01/14 08:43:17 jolt Exp $
avia_av_napi: $Id: avia_av_napi.c,v 1.16 2003/02/28 14:17:35 wjoost Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.175 2003/03/03 17:56:06 wjoost Exp $
Loading /share/keymaps/i386/qwertz/de-latin1.kmap.gz
loadkeys: /share/keymaps/i386/qwertz/de-latin1.kmap.gz:8: cannot open include fi
le qwertz-layout

Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Bold)
$Id: sectionsd.cpp,v 1.166 2003/03/14 04:27:55 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] no card is in slot #2
[camd] no card is in slot #1
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.303 2003/03/14 07:31:51 obi Exp $
[getservices.cpp:FindTransponder:160] going to parse dvb-c provider EWT
[zapit.cpp:prepare_channels:539] LoadServices: success
[bouquets.cpp:parseBouquetsXml:231] reading bouquets
[bouquets.cpp:parseBouquetsXml:258] found 5 bouquets
[zapit.cpp:main:1649] channels have been loaded succesfully
[frontend.cpp:setDiseqcType:406] NO_DISEQC
$Id: controld.cpp,v 1.104 2003/03/19 20:59:02 thegoodguy Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.428 2003/03/19 20:59:02 thegoodguy E
xp $

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[neutrino] menue setup
[scan.cpp:get_transponder:119] get_transponder
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[zapit.cpp:zapit:169] tuned_transponder_id: 00000000
[zapit.cpp:zapit:170] tuned_transponder_frequency: 0
[zapit.cpp:zapit:192] channel_id 00016dcf not found
[zapit.cpp:zapit:248] new_transponder_id: ff17f608
[zapit.cpp:zapit:249] new_transponder_frequency: 401999872
[zapit.cpp:zapit:261] found_transponder_ix: ff17f608
[zapit.cpp:zapit:262] found_transponder_id: ff17f608
[zapit.cpp:zapit:263] switch to frequency: 402000000
[frontend.cpp:setFrontend:196] feparams->frequency: 402000000
[frontend.cpp:setFrontend:197] feparams->inversion: h
[frontend.cpp:setFrontend:198] feparams->u.qam.symbol_rate: 6875000
[frontend.cpp:setFrontend:199] feparams->u.qam.fec_inner: 0
[frontend.cpp:setFrontend:200] feparams->u.qam.modulation: 3
[frontend.cpp:getEvent:248] event after 252 milliseconds
[frontend.cpp:getEvent:269] FE_HAS_SIGNAL
[frontend.cpp:getEvent:271] FE_HAS_CARRIER
[frontend.cpp:getEvent:273] FE_HAS_VITERBI
[frontend.cpp:getEvent:248] event after 899 milliseconds
[frontend.cpp:getEvent:257] FE_HAS_LOCK: freq 402000000
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 0000
[pat.cpp:parse_pat:66] current_pmt_pid: 0000, read_pmt_pid: 0010
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dca
[pat.cpp:parse_pat:66] current_pmt_pid: 0000, read_pmt_pid: 0064
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dcb
[pat.cpp:parse_pat:66] current_pmt_pid: 0000, read_pmt_pid: 00c8
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dcc
[pat.cpp:parse_pat:66] current_pmt_pid: 0000, read_pmt_pid: 012c
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dcd
[pat.cpp:parse_pat:66] current_pmt_pid: 0000, read_pmt_pid: 0190
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dce
[pat.cpp:parse_pat:66] current_pmt_pid: 0000, read_pmt_pid: 01f4
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dcf
[pat.cpp:parse_pat:66] current_pmt_pid: 0000, read_pmt_pid: 0258
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dd0
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 02bc
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dd1
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0320
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dd2
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0384
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dd8
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0bb8
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dd9
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0c1c
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dda
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0c80
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6ddb
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0ce4
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6ddc
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0d48
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6ddd
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0dac
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6dde
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0e10
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6ddf
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0e74
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6de0
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0ed8
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6de1
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0f3c
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: 6de2
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 07d0
[pat.cpp:parse_pat:65] current_service_id: 6dcf, read_service_id: bec6
[pat.cpp:parse_pat:66] current_pmt_pid: 0258, read_pmt_pid: 0b52
[pmt.cpp:parse_pmt:267] current_service_id: 6dcf
[pmt.cpp:parse_pmt:268] current_pmt_pid: 0258
avia_gt_dmx: reloading stc
avia_av: video play (vpid=0x0259)
avia_gt_core: masking unhandled irq reg 1 bit 15
avia_av: audio play (apid=0x025A)
avia_av_core.c: avia_interrupt: Reserved 01.
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok

----------------------------------------------------------------------
cut here
----------------------------------------------------------------------

Beitrag von **Homar** » Montag 31. März 2003, 22:51

- Box über yadd booten...
- Sendersuchlauf starten;
- wenn ende über Telnet folgendes eingeben:
cat /proc/kmsg > /var/tmp/log.txt

- windows-explorer starten, in die Adressleiste folgendes eingeben:
ftp://root@<HierKommtDeineDboxIP>

- im tmp-Ordner findest du die log.txt;
- log.txt nach http://remote-admin.info/upload/dbox2 uploaden;

thx

Beitrag von **mehly** » Montag 31. März 2003, 23:10

mit

cat /proc/kmsg

passiert nix, hat keine Ausgabe mhhhh es wird mit >/var/tmp/log.txt dadurch auch nix erzeugt.

Gibts noch ne andere Möglichkeit ???