Habe versucht mit Bootmanager, 0Modem und Crossover Patchkabel
die neuen Images draufzuspielen....
Bootmanager meldet immer Erfolg, aber wenn ich das neue Image starte, bleibt die box beim BOOTING.... stehen
Was könnte hier die Ursache sein?
Hilfe plz, bin verzweifelt. Schon 6 Images nacheinander geflasht.
Es sieht immer so aus:
qdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-dc.6a.d1.06.00.00-77
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.100
debug: Sending TFTP-request for file C/PROGRAMME/DBOXBOOT/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-10-6b-f9
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.100
Filename 'C/PROGRAMME/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.100
Filename 'C/PROGRAMME/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /D/Downloads/.xvpics/flashim
age.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.100
Filename '/D/Downloads/.xvpics/flashimage.img'.
Load address: 0x120000
Loading: #################
######################
dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors
dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
.......................................
Erased 63 sectors
dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash...
