Meine D-Box startet nicht mehr

Anlaufschwierigkeiten? Was ist was? Worum geht's?
Nebukatnedzar
Neugieriger
Neugieriger
Beiträge: 9
Registriert: Montag 7. April 2003, 16:40

Meine D-Box startet nicht mehr

Beitrag von Nebukatnedzar »

Als auf einem Sender anfing, der Ton zu stottern, hab ich die Box in den Stand by Modus durch längeres drücken des Stand by Knopfs geschaltet. Als ich die Box wieder hoch fahren wollte, kam auch das Bild von Neutrino, aber dann kommt nur noch ein schwarzes Bild mit einem kleinen weißen Punkt oben links, welches immer blinkt! Wer kann mir helfen??? :cry: :cry:
Nebukatnedzar
Neugieriger
Neugieriger
Beiträge: 9
Registriert: Montag 7. April 2003, 16:40

Beitrag von Nebukatnedzar »

Ich hab es geschafft, sie wieder zum starten zu bringen, aber es kommt überall nur schwarzes Bild, sowohl bei free tv als auch bei pay tv programmen! Wer weiß Rat??
Nebukatnedzar
Neugieriger
Neugieriger
Beiträge: 9
Registriert: Montag 7. April 2003, 16:40

Beitrag von Nebukatnedzar »

Hat sich erledigt, weiß zwar nicht woran es lag, aber jetzt funktioniert wieder alles einwandfrei!
Brand
Interessierter
Interessierter
Beiträge: 24
Registriert: Dienstag 8. April 2003, 08:33

Beitrag von Brand »

Ich habe mit einer Box genau das gleich Problem?!

Was hast du gemacht, dass es wieder geht?

Grüße,
Brand
Brand
Interessierter
Interessierter
Beiträge: 24
Registriert: Dienstag 8. April 2003, 08:33

Beitrag von Brand »

Übrigens ist ne Nokia, 2x AMD Flash, Snapshot-Image vom 5.4. gestern eingespielt!

Hier noch mein Bootlog dazu:

tdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-99.f2.ca.05.00.00-28
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 641774 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 641710 Bytes = 626 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Sam Apr 5 14:13:25 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30796k available (1132k kernel code, 380k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:11:72:a8
Linux video capture interface: v1.00
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2003.03.20-13:59+0000) multi-caUsing /lib/modu
les/2.4.20-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.20-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.20-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.20-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20-dbox2/misc/dbox2_fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
Using /lib/modules/2.4.20-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.20-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](pos
. 1).
Using /lib/modules/2.4.20-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 2).
MTD do_erase_oneblock(): Internal flash device timeout occured.
Erase at 0x000c0000 failed immediately: errno -5
Node header CRC failed at 00027a64. But it must have been OK earlier.
Node was: { 1985, 204c, 0000000c, a4ef004c }
Error -3 while decompressing!
c0167424(1539638818)->c1ce6000(4096)
/bin/tuxinfojffs2_do_read_inode(): No data nodes found for ino #51
: error while loading shared libraries: /lib/libtuxbox.so.0: invalid ELF header
[: 2: unknown operand
Using /lib/modules/2.4.20-dbox2/misc/cam.o
$Id: cam.c,v 1.22 2003/01/14 10:26:36 jolt Exp $
Using /lib/modules/2.4.20-dbox2/misc/lcd.o
MTD do_erase_oneblock(): Internal flash device timeout occured.
Erase at 0x000a0000 failed immediately: errno -5
Node header CRC failed at 00015c08. But it must have been OK earlier.
Node was: { 1985, 205c, 0000001c, 5d44005c }
Node totlen on flash (0x0000001c) != totlen in node ref (0x00000038)
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [PowerPC 8xx I2C adapter](p
os. 3).
CAM: attached to adapter PowerPC 8xx I2C adapter
Using /lib/modules/2.4.20-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.20-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.12 2003/01/18 00:52:35 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
i2c-core.o: driver DVB I2C bridge registered.
i2c-core.o: client [dvb] registered to adapter [PowerPC 8xx I2C adapter](pos. 4)
.
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.20-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.5 2003/01/14 08:43:17 jolt Exp $
Using /lib/modules/2.4.20-dbox2/misc/dbox2_fp_napi.o
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Using /lib/modules/2.4.20-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.60 2003/03/13 21:04:21 wjoost Exp $
avia_av_event: $Id: avia_av_event.c,v 1.5 2003/01/02 05:26:43 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.4 2003/01/02 05:26:43 obi Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.34 2003/03/08 09:16:41 waldi Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.19 2003/01/11 22:45:16 obi Exp $
write 1 event's ...
write 1 event's ...
avia_gt_accel: $Id: avia_gt_accel.c,v 1.15 2003/01/14 23:59:32 jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.164 2003/03/09 17:47:34 wjoost Exp $
avia_gt_dmx: Successfully loaded ucode vB107
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.29 2003/03/03 20:52:45 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.22 2003/01/11 22:45:16 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.26 2003/01/11 22:45:16 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.34 2003/01/11 22:45:16 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.22 2003/01/11 22:45:16 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.21 2003/01/11 22:45:16 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.44 2003/03/05 03:38:45 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.6 2003/01/02 05:26:43 obi Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.16 2003/01/11 22:45:16 obi Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.7 2003/01/11 22:45:16 obi Exp $
/bin/tuxinfo: error while loading shared libraries: /lib/libtuxbox.so.0: invalid
ELF header
[: 1: unknown operand
[: 2: unknown operand
[: 3: unknown operand
Hersteller unbekannt
Using /lib/modules/2.4.20-dbox2/misc/avia_av_napi.o
CXA2092 found
avia_av_napi: $Id: avia_av_napi.c,v 1.16 2003/02/28 14:17:35 wjoost Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_napi.o
Unmounting 'ramfs' on '/tmp'
avia_gt_napi: $Id: avia_gt_napi.c,v 1.175 2003/03/03 17:56:06 wjoost Exp $
/etc/init.d/rcS: /var/tuxbox/start_neutrino: No such file or directory
Unmounting 'jffs2' on '/var'
Ready to shutdown system...
The system is going down NOW !!
Sending SIGTERM to all processes.
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
System halt
Nebukatnedzar
Neugieriger
Neugieriger
Beiträge: 9
Registriert: Montag 7. April 2003, 16:40

Beitrag von Nebukatnedzar »

Also ich hab ne Philips Box, von daher weiß ich nicht ob es bei dir genaus funktioniert. Ich hab einfach den Stromstecker raus und wieder reingezogen, als im Display Neutrino stand (stand zweimal av und nc oder so) hab ich auf ok gedrückt und er hat Neutrino geladen. Wenn ich nicht auf ok gedrückt habe, dann ging nach 5 Sekunden oder so auf dem Display das Neutrino weg, und dann hatte ich das Problem das er nichts lud.
Brand
Interessierter
Interessierter
Beiträge: 24
Registriert: Dienstag 8. April 2003, 08:33

Beitrag von Brand »

Komisch, das Menü habe ich gar nicht, habe das Linux Boot-Logo, dann wird das Display "schwarz", genauso, wie der Bildschirm, allerdings blinkt da oben links der Cursor.

Und mein Bootlog sieht jetzt immer so aus:

tdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-99.f2.ca.05.00.00-28
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 641774 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 641710 Bytes = 626 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Sam Apr 5 14:13:25 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30796k available (1132k kernel code, 380k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:11:72:a8
Linux video capture interface: v1.00
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2003.03.20-13:59+0000) multi-caEep. Child ".ne
utrino" (ino #51) of dir ino #2 doesn't exist!
Using /lib/modules/2.4.20-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.20-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.20-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.20-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20-dbox2/misc/dbox2_fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
Using /lib/modules/2.4.20-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.20-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](pos
. 1).
Using /lib/modules/2.4.20-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 2).
jffs2_do_read_inode() on nonexistent ino 51
MTD do_erase_oneblock(): Internal flash device timeout occured.
Erase at 0x000c0000 failed immediately: errno -5
Using /lib/modules/2.4.20-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.20-dbox2/misc/cam.o
MTD do_erase_oneblock(): Internal flash device timeout occured.
Erase at 0x000a0000 failed immediately: errno -5
Error -3 while decompressing!
c0167e10(1540556200)->c1b8e000(4096)
lcdmenu$Id: cam.c,v 1.22 2003/01/14 10:26:36 jolt Exp $
: error while loading shared libraries: i2c-core.o: driver DBox2-CAM registered.

CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [PowerPC 8xx I2C adapter](p
os. 3).
CAM: attached to adapter PowerPC 8xx I2C adapter
/lib/liblcddisplay.so.0: invalid ELF header
Using /lib/modules/2.4.20-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.20-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.12 2003/01/18 00:52:35 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
i2c-core.o: driver DVB I2C bridge registered.
i2c-core.o: client [dvb] registered to adapter [PowerPC 8xx I2C adapter](pos. 4)
.
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.20-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.5 2003/01/14 08:43:17 jolt Exp $
Using /lib/modules/2.4.20-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.20-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.60 2003/03/13 21:04:21 wjoost Exp $
avia_av_event: $Id: avia_av_event.c,v 1.5 2003/01/02 05:26:43 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.4 2003/01/02 05:26:43 obi Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.34 2003/03/08 09:16:41 waldi Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.19 2003/01/11 22:45:16 obi Exp $
write 1 event's ...
write 1 event's ...
avia_gt_accel: $Id: avia_gt_accel.c,v 1.15 2003/01/14 23:59:32 jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.164 2003/03/09 17:47:34 wjoost Exp $
avia_gt_dmx: Successfully loaded ucode vB107
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.29 2003/03/03 20:52:45 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.22 2003/01/11 22:45:16 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.26 2003/01/11 22:45:16 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.34 2003/01/11 22:45:16 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.22 2003/01/11 22:45:16 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.21 2003/01/11 22:45:16 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.44 2003/03/05 03:38:45 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.6 2003/01/02 05:26:43 obi Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.16 2003/01/11 22:45:16 obi Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.7 2003/01/11 22:45:16 obi Exp $
Using /lib/modules/2.4.20-dbox2/misc/ves1820.o
Using /lib/modules/2.4.20-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.20-dbox2/misc/avia_av_napi.o
avia_av_napi: $Id: avia_av_napi.c,v 1.16 2003/02/28 14:17:35 wjoost Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.175 2003/03/03 17:56:06 wjoost Exp $

Please press Enter to activate this console.

Hoffentlich kann mir jemand schnell helfen!

Brand
Nebukatnedzar
Neugieriger
Neugieriger
Beiträge: 9
Registriert: Montag 7. April 2003, 16:40

Beitrag von Nebukatnedzar »

Tut mir leid, da kann ich dir auch nicht helfen. Bei mir steht nach dem Logo von Linux nochmal Neutrino wo ich dann auf ok klicken kann und er ganz normal weiter läd
Brand
Interessierter
Interessierter
Beiträge: 24
Registriert: Dienstag 8. April 2003, 08:33

Beitrag von Brand »

Yup!

Super!

Geht wieder! :D

Warum, weiss ich auch nicht. Hatte eingestellt, dass Neutrino per default geladen wird und deshalb kam das Menü bei mir nicht!

Dann Autoboot deaktiviert, und Neutrino von Hand gestartet und siehe da, alles geht wieder (ALLE KANÄLE)! SELTSAM!

Wenn mir einer sagen könnte, wo da das Problem lag, wäre ich trotzdem dankbar!

Yours, Brand 8)