tuxmail bei cramfs vom 15.04

Habe jetzt mal wieder geupdated und folgendes Problem bei tuxmail:
wenn ich eine Nachricht bekomme, dass eine mail vorliegt und ich nicht mit OK bestätige (Status grün) und mit Home verlasse, wird bei der nächsten Benachrichtigung beim verlassen mit HOME die Box heruntergefahren. Hab ich was falsch konfiguriert?

hallo

ich habe das selbe problem mit image 1.6.9/cramfs vom 15.03

nach aufruf der email und benden mit home shutdown der box.

hier mal mein log von der prozedur.

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .

.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635882 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635818 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Apr 13 14:33:10 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:30:cb:20
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 9, console /dev/console: '/etc/init.d/rcS') multi-ca
Using /lib/modules/2.4.20-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20-dbox2/misc/info.o
ifup: Ignoring unknown interface net
ifup: Ignoring unknown interface loopback
i2c-core.o: driver FOR_PROBE_ONLY registered.
TuxMailD 0.53 started [16.11.1967 - 05:22:29]
TuxMailD <check 4 Accounts everyi2c-core.o: driver unregistered: FOR_PROBE_ONLY
5 min with Logging in Single-Mode>
Using /lib/modules/2.4.20-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.20-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20-dbox2/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.20-dbox2/misc/dvbdev.o
Using /lib/modules/2.4.20-dbox2/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.20-dbox2/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20-dbox2/misc/dmxdev.o
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.20-dbox2/misc/dvb_frontend.o
Using /lib/modules/2.4.20-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.2 2003/04/14 14:11:33 alexw Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
ENX-INITed -> 0
there MIGHT be no TS

avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.3 2003/04/10 14:54:22 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20-dbox2/misc/dvb.o
dvb.c: init_dvb
Init VES1993
Using /lib/modules/2.4.20-dbox2/misc/ves1993.o
i2c-core.o: driver VES1993 DVB DECODER registered.
i2c-core.o: client [VES1993] registered to adapter [](pos. 4).
i2c-core.o: driver sp5659/tsa5059 tuner driver registered.
i2c-core.o: client [DBox2 Tuner Driver] registered to adapter [](pos. 5).
VES1993: sp5659 tuner found
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.5 2003/03/05 09:00:31 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
Using /lib/modules/2.4.20-dbox2/misc/lcd.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.2.1 2003/03/13 15:11:22 alexW Exp $lcd.o: init lc
d driver module
lcd.o: found KS0713/SED153X lcd interface on 3

$Id: sectionsd.cpp,v 1.166 2003/03/14 04:27:55 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.18 2003/03/27 11:04:52 thegoodguy Exp $
[camd] ca system id: 1702
[camd] card_country: GER
[camd] card_number: 8000331554
[camd] card_version: 0384
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.104 2003/03/19 20:59:02 thegoodguy Exp $

[controld] Boxtype detected: (3)
set event: 00000009
[controld] Unknown aspectRatio: 0[controld] setting VideoFormat to auto
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
TuxMailD <Account 0: 000/000 Mail(s) for Claus>
TuxMailD <no Status for Account 1>
[camd] no card is in slot #2
[camd] a card is in slot #1
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.433 2003/04/01 17:30:24 thegoodguy E
xp $
TuxMailD <Account 1: 003/003 Mail(s) for Doris>

[neutrino] frameBuffer Instance created
[camd] no card is in slot #2
[camd] a card is in slot #1
TuxMailD <Account 2: 000/000 Mail(s) for EBay>
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
TuxMailD <Account 3: 000/000 Mail(s) for Musik>
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
* Empty reply from serverTuxMailD <HTTP-Command "http://127.0.0.1/cgi-bin/startP
lugin?name=tuxmail.cfg" failed (Empty reply from server)>
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[controld] setting VideoFormat to auto
video notify: videomenu.videoformat
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[basicsocket] send_data: Resource temporarily unavailable
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1197500
avia_gt_dmx: reloading stc
[camd] starting onid 0085 sid 0029
descramble onid: 0085 sid: 0029 status: 1d1d
avia_core.c: avia_interrupt: Reserved 01.
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok
[neutrino] initialized everything
[CPlugins] try exec...
TuxMail 0.52
TuxMail <Font "/share/fonts/pakenham.ttf" loaded>
TuxMail <no Status for Account 4>
TuxMail <no Status for Account 5>
TuxMail <no Status for Account 6>
TuxMail <no Status for Account 7>
TuxMail <no Status for Account 8>
TuxMail <no Status for Account 9>
TuxMailD <could not update Status for Account 4>
TuxMailD <could not update Status for Account 5>
TuxMailD <could not update Status for Account 6>
TuxMailD <could not update Status for Account 7>
TuxMailD <could not update Status for Account 8>
TuxMailD <could not update Status for Account 9>
[CPlugins] exec

...
avia_gt_dmx: reloading stcsid 0014

avia_gt_dmx: reloading stcOMPLETION_EV: freq 1158500

descramble onid: 0085 sid: 0014 status: 1d1d
avia_gt_dmx: reloading stc
[camd] starting onid 0085 sid 0024
descramble onid: 0085 sid: 0024 status: 1d1d
avia_gt_dmx: queue_data_move: -144 bytes requested, 4748 availible
avia_gt_dmx: queue_data_move: 1 bytes requested, 0 availible
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1197500
avia_gt_dmx: reloading stcsid 0014

Segmentation fault
descramble onid: 0085 sid: 0014 status: 1d1d
zapit shot down

Waiting for controld (max. 5 seconds)
Waiting for controld (max. 4 seconds)
Waiting for controld (max. 3 seconds)
Waiting for controld (max. 2 seconds)
Waiting for controld (max. 1 seconds)
Going to halt system now ...
Starting pid 133, console /dev/console: '/etc/init.d/halt'
CXA2126 found
: no process killed
Unmounting 'ramfs' on '/tmp'
umount: /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
Ready to shutdown system...
The system is going down NOW !!TuxMailD <shutdown>
[ConfigFile] Unable [ConfigFile] Unable to open file /var/tuxbox/config/controld
.conf for writing[nhttpd] stop requested......
to open file /var/tuxbox/config/controld.conf .
TuxMailD <shutdown>
TuxMailD 0.53 closed [17.04.2003 - 10:17:01]
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
System halt

ansonsten eine super sache.

Beitrag von **zexma** » Donnerstag 17. April 2003, 23:22

midreyer hat geschrieben:Habe jetzt mal wieder geupdated und folgendes Problem bei tuxmail:
wenn ich eine Nachricht bekomme, dass eine mail vorliegt und ich nicht mit OK bestätige (Status grün) und mit Home verlasse, wird bei der nächsten Benachrichtigung beim verlassen mit HOME die Box heruntergefahren. Hab ich was falsch konfiguriert?

Yepp; gibt 'nen Segfault; LOG hab ich zur Zeit nicht da;
aber warum postet ihr nicht in den vorhanden thread:

http://tuxbox.berlios.de/forum/viewtopi ... &start=120 nzw.
http://tuxbox.berlios.de/forum/viewtopi ... sc&start=0

Beitrag von **LazyT** » Freitag 18. April 2003, 10:45

Das scheint aber nur mit Neutrino Probleme zu geben. Nehmt mal bitte das HTTPCMD raus oder lasst mal nur eine Nachricht ausgeben anstatt das Plugin zu starten.

Beitrag von **Madwilli** » Samstag 19. April 2003, 10:07

@LassyT

also wenn nur eine nachricht ausgegeben wird und mann dann das plugin mit der hand startet läuft das ganze.

bin fast begeistert

Tuxbox-Board

tuxmail bei cramfs vom 15.04

tuxmail bei cramfs vom 15.04

Re: tuxmail bei cramfs vom 15.04