riesen Probleme nach update

[Tuxxen]

Hallo habe ein riesen Problem und weis auch nicht woran es liegen kann.
Also ich habe das neue image über internetupdate geflasht (17.6.)
Seit dem update laufen meine Premiere Programme nicht mehr.
Das Bild und der Ton brechen laufend zusammen. Auch direkt nach dem booten. Kommt immer nur alles stückchenweise.

Die free tv programme laufen normal.


Was soll ich machen?
Ich hoffe mir kann jemand helfen

[DieMade]

Bootlog?

[Tuxxen]

habe nochmal genau nachgesehen.
prem start und prem1-prem7 und musikkanäle laufen nicht sport krimi 13 th street usw. laufen.

Box: Sagem

[DieMade]

Tolles Bootlog

[Tuxxen]

könntest du bitte etwas konkreter sein?
bin noch newbe

was ist mit bootlog?????????

[Zahni]

-> FAQ-Bereich

-Zahni

[zexma]

könntest du bitte etwas konkreter sein?
bin noch newbe
was ist mit bootlog?????????

http://tuxbox.berlios.de/forum/viewforum.php?f=26

[Tuxxen]

Habe leider nix brauchbares im FAQ gefunden

[Zahni]

Bitte Brille aufsetzen unf 4. Artikel von oben lesen.

-Zahni

[zexma]

Habe leider nix brauchbares im FAQ gefunden

Respekt! Du hast Dir ganze 11 min. (max.) Zeit genommen.
Also zu einigen posts hier fällt mir echt nix mehr ein...
P.S.:
Seit "03 Dec 2002" dabei und kennt die FAQ nich.... *seufz*

[Tuxxen]

ja sorry übersehen

so jetzt hab ich hier mal die bootlog aber kann damit nichts groß anfangen
bin ja noch newbe.
Weis immer noch nicht warum die dummen programme nicht laufen.
Hoffe ihr könnt mir weiterhelfen

odebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.3 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-99.53.4b.08.00.00-90
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/o
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 21:12:06)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 641014 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640950 Bytes = 625 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

[DieMade]

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0

Bevor das da oben kommt, die 2 am PC drücken, da fehlt das Wichtigste.

[Tuxxen]

so folgendes jetzt

odebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPSge, start= 0x800000, size= 202740
debug: BMon V1.3 mID 03fy sig: 262
debug: feID 00 enxID 03


PPCBoot
debug: fpID 52 dsID 01-99.53.4b.08.00.00-90

CPU:
debug: HWrev 61 FPrev 0.23B I-Cache 1 kB D-Cache
debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled
B
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3) MB


debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/o
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 641014 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640950 Bytes = 625 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

[DieMade]

Nochmal ...

[Tuxxen]

warum denn noch mal das ganze?

[DieMade]

Steht da mehr wie vorher? Nein. Ein Bootlog ist "etwas" umfangreicher.

Also nochmal starten und die 2 am PC zur rechten Zeit drücken.

[Zahni]

Weil wir den Rest vom Bootlog sehen wollen.

-Zahni

[Tuxxen]

so ich habs

bei den letzten einträgen hab ich auf die sender geschaltet die nicht
gehen:

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 641014 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640950 Bytes = 625 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.21-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Jun 15 16:26:19 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30804k available (1128k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Co
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:3e:b0:04
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at locat
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 5
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'Using /lib/modules/2.4.2
1-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.21-dbox2/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.21-dbox2/misc/event.o
TuxMailD 1.4 started [23.12.1969 - 11:18:14]
TuxMailD <LOGMODE=L invalid, setevent: init ...
to "S">
TuxMailD <check 1 Accounts every 15 min without Logging>
TuxMailD <no Spamlist found, Filter disabled>
Using /lib/modules/2.4.21-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
Using /lib/modules/2.4.21-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered. debug: DDF: 66.76 BogoMIPS
i2c-core.o: client [saa7126] registered to adapter [](pos. 1).Mon V1.3 mID 03
debug: feID 00 enx
Using /lib/modules/2.4.21-dbox2/misc/fp.oD 52 dsID 01-99.53.4b.08.00.00-90
i2c-core.o: driver DBox2 Frontprocessor driver registered. FPrev 0.23
debug: B/Ex/Fl(MB)
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
).
Using /lib/modules/2.4.21-dbox2/misc/dvb_demux.otting BOOTP request via broadcast
Using /lib/modules/2.4.21-dbox2/misc/dvbdev.oup BOOTP/TFTP boot
Using /lib/modules/2.4.21-dbox2/misc/avia.oS bootstrap loader (v1.5)
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Found file /root/platform/sagem-dbox2/ke
write 1 event's ...

PPCBoot
debug: fpID 52 dsID
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).he
debug: B/Ex/Fl(MB) 32/00/08

W
CAM: attached to adapter
B
dbox2
Using /lib/modules/2.4.21-dbox2/misc/dmxdev.otstrap loader (v0.3) MB


Using /lib/modules/2.4.21-dbox2/misc/dvb_frontend.ouest via broadcast
Using /lib/modules/2.4.21-dbox2/misc/avia_gt.o
boot net failed
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $

Found Flash-FS superblock version 3.1
avia_gt_core: autodetecting chip type... AViA eN/o
DRAM: 32 MB
FLASH:
avia_gt_core: Loaded AViA eNX/GTX driverne.
LCD: rea
Using /lib/modules/2.4.21-dbox2/misc/dvb.o
In: serial
dvb.c: init_dvb
Er
Init AT76C651

O
Using /lib/modules/2.4.21-dbox2/misc/at76c651.o
2: Console on ttyS0
$Id: at76c651.c,v 1.31 2002/09/09 18:45:53 obi Exp $
Select (1-3), other keys to stop a
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_fb.o
debug: B/Ex/Fl(MB) 32/00/08
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.5 2003/03/05 09:00:31 zwen Exp $bug:
BOOTP/TFTP bootstrap loader (v0.3)
avia_gt_gv: set_input_mode (mode=2)Transmitting BOOTP request via broa
avia_gt_gv: set_input_size (width=720, height=576)
debug: Given up BOOTP/TFTP boot
avia_gt_gv: set_input_mode (mode=2)

Flash-FS bootstrap loade
avia_gt_gv: set_input_size (width=720, height=576)sh-FS superblock version 3.1
avia_gt_gv: set_input_mode (mode=2)tform/sagem-dbox2/kernel/os in Flas
avia_gt_gv: set_input_size (width=720, height=576)
debug: Got Block #0052
Console: switching to colour frame buffer device 82x32202740
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_lirc.o
LCD: ready
FB: loading - re
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
Err: serial

Options:
1: Console on
Using /lib/modules/2.4.21-dbox2/misc/lcd.oyS0
3: Console on f
cdkVcInfo $Id: cdkVcInfo.c,v 1.3 2003/05/24 22:04:36 alexW Exp $ stop autoboot: 0

lcd.o: init lcd driver moduleuz' to 0x100000
lcd.o: found KS0713/SED153X lcd interface on 3pleate: 641014 bytes loaded to 0x100000

[camd] a card is in slot #1
BOOTP/TFTP bootst
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.470 2003/06/13 12:45:52 digi_casi Exing BOOTP request via broadcast
d
p $: G

[neutrino] frameBuffer Instance created
boot net failed
1024k video membootstrap loade
avia_gt_gv: set_input_mode (mode=2)

Found Flash-FS superblock ver
avia_gt_gv: set_input_size (width=720, height=576) file /root/platform/sagem-dbox2/kernel/os in Flas
[neutrino] enable flash
[neutrino] Software update enabled0052

will v
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...0x40000


PPCBoot 1.1.6 (TuxB
[lcdd] date-skin not found -> using default...

CPU: PPC823ZTn
[lcdd] month-skin not found -> using default...
loading locales: scandir: No such file or directory
Load Add
[camd] no card is in slot #2
Entry Point:
[camd] a card is in slot #1
Verifying Checksum
[controld] setting VideoFormat to autoUncompressing Kernel Image ... OK
video notify: videomenu.videoformatug: DDF: Calibrating delay loop...
[neutrino] control event register
[neutrino] sectionsd event register V1.3 mID 03
[neutrino] zapit event register
[neutrino] initialized everything
TuxMailD <Account 0: 000/000 Mail(s) for 1&1>
descramble onid: 0085 sid: 0011 status: 1d1d
avia_core.c: avia_interrupt: Reserved 01.
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok
[CFrontend::getEvent] FE_COMPLETION_EV: freq 378000
[camd] starting onid 0085 sid 001b
descramble onid: 0085 sid: 001b status: 1d1d
[CFrontend::getEvent] FE_COMPLETION_EV: freq 362000
[camd] starting onid 0085 sid 0011
[sectionsd] filter 0x4e mask 0xfe -> skip sections for table 0x73
descramble onid: 0085 sid: 0011 status: 1d1d
[CFrontend::getEvent] FE_COMPLETION_EV: freq 370000
[camd] starting onid 0085 sid 0014
descramble onid: 0085 sid: 0014 status: 1d1d
write 1 event's ...
write event ... free found
[camd] starting onid 0085 sid 0029
descramble onid: 0085 sid: 0029 status: 1d1d

[Tuxxen]

hat die ganze sache vielleicht etwas mit den ucodes zu tun?

[DieMade]

Das Bootlog ist total durcheinander

Am besten die Box komplett neu flashen (an die uCodes denken!).