hab meine Nokia Kabel Box in den Debug Mode nach Dietmars Anleitung versetzt.
Leider kann ich nun aber kein Image flashen.
Mein Log:
Ndebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
Board_EventWait: timed out
debug: unknown demodulatordebug: BMon V1.0 mID 01
debug: feID 00 gtxID 0b
debug: fpID 5a dsID 01-95.59.26.07.00.00-02
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.3, My IP 192.168.1.5
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-18-8d-fc
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.3; our IP address is 192.168.1.5
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.3; our IP address is 192.168.1.5
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
Kann mir einer weiterhelfen?
Gruß
MOSS