Snapshot 17.09. Sagem1x - Kanalsuche klappt

[torres]

Endlich klappt bei meiner Sagem1x auch der Kanalsuchlauf.

Basis 1.6.10 neu aufgespielt, Head vom 17.09.
avia600vb028, ucode_B107, cam_01_02_105D

Freue mich schon darauf, endlich den Movieplayer zu testen....

[Tramp88]

Hab es genauso gemacht wie du Leider fehlanzeige bei meiner Sagem.
Habe die gleichen ucodes drinn, außer avia600vb022

Hier ein Auszug der Log:

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.22-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.7 2003/09/11 23:22:47 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_napi.o
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Using /lib/modules/2.4.22-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.75 2003/09/12 04:46:54 obi Exp $
avia_av_event: $Id: avia_av_event.c,v 1.10 2003/07/24 01:59:21 homar Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.10 2003/07/24 01:59:21 homar Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.41 2003/09/12 04:41:15 obi Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.20 2003/08/01 17:31:22 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.18 2003/08/01 17:31:21 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.187 2003/09/12 02:46:30 obi Exp $
avia_gt_dmx: loaded ucode vB107
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.34 2003/08/01 17:31:22 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.27 2003/09/12 04:41:16 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.30 2003/08/01 17:31:21 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.39 2003/08/01 17:31:22 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.50 2003/09/13 02:45:12 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.13 2003/08/01 17:31:22 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.29 2003/09/12 04:41:16 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.22 2003/08/01 17:31:22 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.11 2003/08/01 17:31:22 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/ves1x93.o
VES1x93 not found (identity 00)
Using /lib/modules/2.4.22-dbox2/misc/at76c651.o
DVB: registering frontend 0:0 (Atmel AT76C651A with DAT7021)...
Using /lib/modules/2.4.22-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.25 2003/09/12 03:01:51 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.187 2003/09/11 23:22:48 obi Exp $
cdkVcInfo $Id: cdkVcInfo.c,v 1.5 2003/09/11 13:26:25 alexW Exp $

$Id: sectionsd.cpp,v 1.167 2003/06/18 12:19:23 alexw Exp $
caching 504 hours
events are old 60min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.329 2003/09/16 08:58:39 thegoodguy Exp $
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.108 2003/08/26 20:13:55 zwen Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[camd] no card is in slot #2
[camd] a card is in slot #1
[cdkVcInfo] Version (Image): 11610200309171158
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
Error -5 while decompressing!
c01637bc(16777596)->c1234000(4096)
[CBasicClient] receive failed: /tmp/zapit.sock
[neutrino] control event register


Stimmt irgendwas mit dem Zapit nicht.

Tramp88

[DieMade]

Error -5 while decompressing!
c01637bc(16777596)->c1234000(4096)

Das cramfs hat ne Macke, flash mal neu.

[Tramp88]

Das komische ist, jeden Tag lade ich mir den aktuellen Snapshot runter,
bei allen das gleiche Log.

Tramp88

[Gorcon]

Vieleicht treibt da ein Virenscaner sein "Unwesen" oder eine Firewall.
Gruß Gorcon

[Tramp88]

Ja Beides, können die meine Downloads zerstören?

Tramp88

[Gorcon]

Entweder den Download oder den Upload auf die Box.
Gruß Gorcon

[Tramp88]

Habe die Störenfriede ausgemacht, das Image neu gesaugt und den gleichen Fehler:

Odebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-57.ea.a5.07.00.00-a3
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 146452
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) (Jul 21 2003 - 20:19:22)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
env: can't set "lcd_inverse"
env: can't set "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 648893 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 648829 Bytes = 633.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Sep 7 12:04:47 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30800k available (1100k kernel code, 408k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:3a:b2:e9
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Intel/Sharp Extended Query Table at 0x0031
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 11, console /dev/coUsing /lib/modules/2.4.22-dbox2/misc/event.o
event: $Id: event.c,v 1.11 2003/09/08 22:38:56 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.22-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.22-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.22-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 1).
Using /lib/modules/2.4.22-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 2).
Using /lib/modules/2.4.22-dbox2/misc/lcd.o
Using /lib/modules/2.4.22-dbox2/misc/cam.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.24 2003/09/08 23:16:17 obi Exp $
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [PowerPC 8xx I2C adapter](p
os. 3).
CAM: attached to adapter PowerPC 8xx I2C adapter
Using /lib/modules/2.4.22-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.22-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.16 2003/07/24 01:59:22 homar Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
i2c-core.o: driver DVB I2C bridge registered.
i2c-core.o: client [dvb] registered to adapter [PowerPC 8xx I2C adapter](pos. 4)
.
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.22-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.7 2003/09/11 23:22:47 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_napi.o
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Using /lib/modules/2.4.22-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.75 2003/09/12 04:46:54 obi Exp $
avia_av_event: $Id: avia_av_event.c,v 1.10 2003/07/24 01:59:21 homar Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.10 2003/07/24 01:59:21 homar Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.41 2003/09/12 04:41:15 obi Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.20 2003/08/01 17:31:22 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.18 2003/08/01 17:31:21 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.187 2003/09/12 02:46:30 obi Exp $
avia_gt_dmx: loaded ucode vB107
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.34 2003/08/01 17:31:22 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.27 2003/09/12 04:41:16 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.30 2003/08/01 17:31:21 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.39 2003/08/01 17:31:22 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.50 2003/09/13 02:45:12 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.13 2003/08/01 17:31:22 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.29 2003/09/12 04:41:16 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.22 2003/08/01 17:31:22 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.11 2003/08/01 17:31:22 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/ves1x93.o
VES1x93 not found (identity 00)
Using /lib/modules/2.4.22-dbox2/misc/at76c651.o
DVB: registering frontend 0:0 (Atmel AT76C651A with DAT7021)...
Using /lib/modules/2.4.22-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.25 2003/09/12 03:01:51 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.187 2003/09/11 23:22:48 obi Exp $
cdkVcInfo $Id: cdkVcInfo.c,v 1.5 2003/09/11 13:26:25 alexW Exp $

$Id: sectionsd.cpp,v 1.167 2003/06/18 12:19:23 alexw Exp $
caching 504 hours
events are old 60min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.329 2003/09/16 08:58:39 thegoodguy Exp $
$Id: controld.cpp,v 1.108 2003/08/26 20:13:55 zwen Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[cdkVcInfo] Version (Image): 11610200309171158
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
Error -5 while decompressing!
c01637bc(16777596)->c123f000(4096)
[CBasicClient] receive failed: /tmp/zapit.sock
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[neutrino] initialized everything
zap failed!
[sectionsd] getUTC: read: Connection timed out


Wat nu....


Cu Tramp88

[alexW]

Entweder den Download oder den Upload auf die Box.

CRC wird auf der Box geprueft, also ist hier das Flash kaputt.

[Tramp88]

meinst du das Flash der Box?

Offizielle Images funzen wunderbar.

Cu.Tramp88

[jrl]

Bei mir klappt jetzt DIVX (Vom Vidomi generiert) ohne das vorherige Program unten zu sehen ist

Einzig ist jetzt eine bis zwei pixel hohe Zeilen zu sehen direkt unter dem Bild.

Philips SAT 1.6.10 HEAD 17.09