Image einspielen auf D-Box 2

Hi
Habe jetzt schon alle Anleitungen ausprobiert, um ein Image auf meiner Box einzuspielen.
Es funktioniert einfach nicht.
Hat jemand einen Rat ?
Hier mal die Fehlermeldung auf dem LCD:

***Adapter Desc: Realtek 8139-series PCI NIC (Microsoft's Packet Scheduler)
***MAC address: 00:06:4F:02:A5:26 Local IP: 192.168.30.3 (via Packet-Driver #0)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\box\ppcboot"...
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\box\ppcboot"...
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\box\ppcboot"...
TFTP> Transfer finished, sent 435 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\13.img"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\13.img"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\13.img"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\13.img"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\13.img"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\13.img"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "\tftpboot\13.img"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)

Ich komme ja soweit das auf dem LCD FLASHING erscheint.
Aber er sagt immer das er ein File nicht findet.
Hier das LOG:

BOOTP broadcast 2
TFTP from server 192.168.30.3; our IP address is 192.168.30.5
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 3
TFTP from server 192.168.30.3; our IP address is 192.168.30.5
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 4
TFTP from server 192.168.30.3; our IP address is 192.168.30.5
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 5
TFTP from server 192.168.30.3; our IP address is 192.168.30.5
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 6
TFTP from server 192.168.30.3; our IP address is 192.168.30.5
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 7
TFTP from server 192.168.30.3; our IP address is 192.168.30.5
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: Mdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-b2.08.46.07.00.00-f9
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.30.3, My IP 192.168.30.5
debug: Sending TFTP-request for file C/box/ppcboot
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

ppcboot 0.6.4 (Jul 12 2001 - 02:51:28)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1f-61-c1
FLASH: 8 MB
FB logo at: none
Input: serial
Output: serial

Any key druecken um das Flashing abzubrechen.. : 0
LCD driver (KS0713) initialized
Logo FlashingBOOTP broadcast 1
TFTP from server 192.168.30.3; our IP address is 192.168.30.5
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.30.3; our IP address is 192.168.30.5
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: T

Dein Netzwerk lahmt. Neuer Treiber für die Realdreck installiert?

Hi

Nein es liegt nicht am Netzwerk.
Es kommt immer possible File not.
Was könnte noch der Fehler sein ?

Gruß

Image in 13.img imbenennen und in den gleichen Pfad wie die verwendete ppcboot legen.

Hi
Habe ich auch schon gemacht.
Es kommt immer die gleiche Meldung : possible File not found

hier nochmal ein LOG:

Mdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-b2.08.46.07.00.00-f9
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root> Mdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-b2.08.46.07.00.00-f9
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.30.3, My IP 192.168.30.4
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1f-61-c1
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.30.3; our IP address is 192.168.30.4
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.30.3; our IP address is 192.168.30.4
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.30.3; our IP address is 192.168.30.4
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.30.3; our IP address is 192.168.30.4
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T
Abort

Gibt es eine Datei "C:\Programme\DBoxBoot\13.img"?

Groß-/Kleinschreibung sind hierbei auch wichtig!

Hi
Ja die gibt es.
In diesem Ordner ist auch das ppcboot.

Gruß

Dann weiss ich's nicht (bestimmt heisst die 13.img.txt).

nein heißt sie nicht.
Habe das alles überprüft.

Merci für deinen Rat

Hmpf, mal nimmst Du "Flashen ohne Nullmodem", mal die "normale" Methode.

Beschränk Dich doch mal auf eine Version.

Leg die 13.img nach C:\box und wähle dort die ppcboot aus.