Hallo liebe Gemeinde...
hier mein bootlog. Das Ende ist vor allem interessant.
Habe kommentare beginnend mit ------------- eingefuegt.
-------------------------- Start Bootlog ----------
Code: Alles auswählen
¸debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPSge, start= 0x800000, size= 146452
debug: BMon
(event.event == EVENT_ARATIO_CHAtatus: 1d1deID 7a
debug: BMon V1.0 mID 01fy sig: 262
debug: fpID 5a dsID 01-ce.5b.0
debug: feID 7a gtxID 0b
U-Bootebug:
debug: fpID 5a dsID 01-ce.5b.06.07.00.00-27debug: B/Ex/Fl(MB) 32/00/08
CPU: PTCHDOG r
debug: HWrev X5 SWrev 0.81 kB I-Cache 1 kB D-Cache:
BOOTP/TFTP bootstrap loader (v0
debug: B/Ex/Fl(MB) 32/00/08
debug:
debu
WATCHDOG reset enabledequest via broadcast
dbox2:root> debug:d
BOOTP/TFTP bootstrap loader (v0.3)M: 32 MB
boot net failed
FLASH: 8 MB
Flash-FS bo
debug: loade
debug: Transmitting BOOTP request via broadcastlash-FS superblock version 3.1
env: can't set "lcd_inverse"le /root/platform/nokia-dbox
debug: Given up BOOTP/TFTP
Board: DBOX2, Nokia
Watchdog enabled
I2C: readyled
DRAM: 32 MB
I2C: rea
FLASH: 8 MB
DRAM: 32
Scanning JFFS2 FS: . done.
Scanning JFFS
env: can't set "lcd_inverse"
env: can't set "l
env: can't set "lcd_contrast"
env: can't set "lcd
FB: ready
LCD: ready
FB: rea
In: serial
LCD: ready
Out: serialn: serial
Err: serialut: serial
Net: SCC ETHERNETserial
Options:C ETHERN
1: Console on null
Options:
2: Consolen null
3: Console on framonsole
¸debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
¸debug: DDF: Calibrating delay loop... debug: DDF: 67.79
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0bbug: BMon V1.0 mID 01
debug: fpID 5a dsID 01-ce.5b.06.07.00.00-27
debug: fpID 5a ds
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08rev X5 SWrev 0.81
WATCHDOG reset enabledg: B/Ex/Fl(MB) 32/00/0
dbox2:root> debug:
WATCHDOG
BOOTP/TFTP bootstrap loader (v0.3)
dbox2:root> debug:
debug:OTP/TF
debug: Transmitting BOOTP request via broadcast
debug:
debug: Transmitting B
debug: Given up BOOTP/TFTP boot
boot net failed: Given up BOOT
Flash-FS bootstrap loader (v1.5)
boot net failed
Found Flash-FS superblock version 3.15)
F
Found file /root/platform/nokia-dbox2/kernel/o
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache- 20:18:06)
C
Board: DBOX2, Nokiat 67.200 MHz: 2 kB
Watchdog enabled
I2C: ready
DRAM: 32 MBd: DBOX2, No
FLASH: 8 MB
Scanning JFFS2 FS: . done.
I2C: r
env: can't set "lcd_inverse"
FLASH: 8 MB
env: can't set "lcd_contrast" done.
FB: readyt set "lcd_i
LCD: ready
In: serial: can't set "
Out: serial
Err: serial
FB: read
Net: SCC ETHERNET ready
Options:ial
1: Console on nulll
Err:
2: Console
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)..
Image Name: dbox2
Data Size: 648829 Bytes = 633.6 kBPC Linux Kernel Image (gzip compressed)
Load Address: 00000000
Entry Point: 00000000 648829 Bytes = 633.6 kB
Verifying Checksum ... OK
Load Address:
debug: fpID 5a dsID 01-ce.5b.06.07.00.00-27
debug: feID 7a gtxID 0b
debug: HWrev X5 SWrev 0.81 dsID 01-ce.5b.06.07.00
debug: B/Ex/Fl(MB) 32/00/08
d
WATCHDOG reset enabled.81
dbox2:root> debug:x/Fl(MB) 32/00/08
BOOTP/TFTP bootstrap loader (v0.3) reset enabled
debug:2:root
debug: Transmitting BOOTP request via broadcastloader (v0.3)
debug: Given up BOOTP/TFTP bootg BOOTP request via broadcast
boot net failed
Flash-FS bootstrap loader (v1.5)TP/TFTP boot
Found Flash-FS superblock version 3.1
Flash-FS bootstrap loader
will verify ELF image, start
verify sig: 262= 146452
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Jul 21 2003 - 20:18:06)0x40000
U-Boot 0.4.0 (Tu
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Ca
Board: DBOX2, Nokia
Watchdog enabled
Board: DB
I2C: ready
DRAM: 32 MBatchdog enab
FLASH: 8 MB
Scanning JFFS2 FS: . done.DRAM: 32 MB
F
env: can't set "lcd_inverse"ing JFFS2 FS: . done.
env: can't set "lcd_contrast" set "lcd_inverse"
FB: ready
env: ca
LCD: readycontrast"
In: serial
Out: serial
LC
Err: serial
Select option (1-3), ot
...............................................................
.............................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000d 63 sectors
### FS (c
### FS load complete: 648893 bytes loaded to 0x100000
### FS load complete: 648
## Booting image at 00100000 ...
Image Name: dbox2ting image at 00100000
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Image Type: PowerPC Linux Kernel Ima
Data Size: 648829 Bytes = 633.6 kB
Load Address: 00
debug: B/Ex
Decrementer Frequency = 252000000/60
WATCHDOG reset enabled
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)OOTP/TFTP bootstrap loader (v0.3)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)quest via broadcast
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)Block #0032
will verify ELF image, sta
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
verify sig: 262
Branching t
Mount cache hash table entries: 512 (order: 0, 4096 bytes)21 2003 - 20:18:06)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) D-Cache
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)dog enabled
I2C: ready
POSIX conformance testing by UNIFIXMB
Scanning JFFS2 FS: .
Linux NET4.0 for Linux 2
1: Console on null
devfs: boot_options: 0x1Console on ttyS0
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communicationsn (1-3), other keys to stop autoboot: 0
AB.
i2c-core.o: i2c core module...........................
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMCected 63 sectors
ttyS01 at 0x0380 is a SMCmfs) loading 'vmlinuz' to
pty: 256 Unix98 ptys configured
### FS l
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:12:75:c2
## Booti
D-Box 2 flash driver (size->0x800000 mem->0x1000
Image Name: dbo
0x00000000-0x00020000 : "BR bootloader"S
0x00020000-0x00040000 : "flfs (ppcboot)"1.0 mID 01
debu
0x00040000-0x00720000 : "root (cramfs)"
debug: fpID 5a dsID 01-ce.
0x00720000-0x00800000 : "var (jffs2)"
debug: HWr
0x00020000-0x00800000 : "flash without bootloader" B/Ex/Fl(MB) 32/00/08
W
0x00000000-0x00800000 : "complete flash"
dbox2:root> debug:
Linux video capture interface: v1.
will verify ELF image,
VFS: Mounted root (cramfs filesystem) readonly.
verify sig:
Mounted devfs on /devnching to 0x40000
Freeing unused kernel memory: 60k init) (Jul 21 2003 - 20:18:06)
Starting pid 11, console /dev/co/bin/sh: run-parts: not foundti-cMHz: 2 kB I-Cache 1 kB D-Cache
Using /lib/modules/2.4.22-dbox2/misc/event.o
Watchdog enabled
event: $Id: event.c,v 1.11 20ready
Net: SCC E
Using /lib/modules/2.4.22-dbox2/misc/dbox2_i2c.o Console on null
2: Consol
[i2c-8xx]: mpc 8xx i2c init
3: Console on framebu
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.op autoboot: 0
[i2c-8xx]: adapter: 0.....................
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp.o
Un-Protecte
i2c-core.o: driver DBox2 Frontprocessor driver registered. 'vmlinuz' to 0x100000
i2c-core.o: client [DBox2 Frontprocessor client] registered000
Using /lib/modules/2.4.22-dbox2/misc/saa7126.oW) Wer Kernels nachmacht, oder faelscht, wir
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
On node 0 totalpages: 8192
zone(0): 8192
. 2)..
Using /lib/modules/2.4.22-dbox2/misc/cam.o
zone(2): 0 pages.
$Id: cam.c,v 1.24 2003/09/08 23
Calibrating delay loop... 66.96 BogoMIPS
Using /lib/modules/2.4.22-dbox2/misc/dvb_i2c_bridge.olable (1100k kernel code, 408k data, 60k init, 0k hig
Using /lib/modules/2.4.22-dbox2/misc/avia_napi.o
Dentry cache h
$Id: avia_napi.c,v 1.16 2003/07/24 01:59:22 homar Exp $
In
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
Mount cache hash tab
i2c-core.o: driver DVB I2C bridge registered.
Initializing RT netlink socket
$Id: cam_napi.c,v 1.7 2003/09/11 23:22:47 obi Exp $
devfs: v1.12c (20020818) Richard Gooch (rgooch
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_napi.o
devfs: boot_options: 0x1
Using /lib/modules/2.4.22-dbox2/misc/avia_av.o1, 2002 Red Hat, Inc., designed by Axis Commun
avia_av: $Id: avia_av_core.c,v 1.75 2003/09/12 04:46:54 obi Exp $
AB.
i2c-core.o: i2c core module
avia_av_event: $Id: avia_av_event.c,v 1.10 2003/07/24 01:59:21 homar Exp $
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is
avia_gt_dmx: loaded ucode vB107without bootloader"
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
Linux video capture interface: v1.00
avia_gt_core: masking unhandled irq reg 0 bit 6ouse device common for all mice
avia_gt_gv: $Id: avia_gt_gv.c,v 1.34 2003/08/01 17:31:22 obi Exp $
IP Protocols: ICMP, UDP, TCP
avia_gt_gv: set_input_size (width=720, height=576)512 buckets, 4Kbytes
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.27 2003/09/12 04:41:16 obi Exp $bind 4096)
N
avia_gt_capture: $Id: avia_gt_capture.c,v 1.30 2003/08/01 17:31:21 obi Exp $
VFS: Mounted root (cramfs filesystem) readonly.
avia_gt_pig: $Id: avia_gt_pig.c,v 1.39 2003/08/01 17:31:22 obi Exp $
Freeing unused kernel memory: 60k init
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.50 2003/09/13 02:45:12 obi Exp $ Exp $
Using /l
avia_gt_gv: set_input_mode (mode=2)o
avia_gt_gv: set_input_size (width=720, height=576)b-core.o
avia_gt_gv: set_input_mode (mode=2)
Using
avia_gt_gv: set_input_size (width=720, height=576)
[i2c-8xx]:
avia_gt_gv: set_input_mode (mode=2)
i2c-core.o: adapter PowerP
avia_gt_gv: set_input_size (width=720, height=576)
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_input.o
avia_gt_ir: $Id: avia_gt_ir.c,v 1.29 2003/09/12 04:41:16 obi Exp $dules/2.4.22-dbox2/misc/avs.o
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_oss.over registered.
avia_oss: $Id: avia_gt_oss.c,v 1.22 2003/08/01 17:31:22 obi Exp $to adapter [PowerPC 8xx I2C adapter](pos
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_v4l2.o
. 1).
Using /lib/modules/2.4.22-dbox2/misc
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.11
Using /lib/modules/2.4.22-dbox2/misc/avia_av_napi.o
i2c-core.o: driver DBox2-CAM registered.
avia_av_napi.c: $Id: avia_av_napi.c,v 1.25 2003/09/12 03:01:51 obi Exp $.3)
i2c-core.o: client [DBOX2-CAM] registered to adapter [PowerP
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_napi.o
debug: Given up BOOTP/TFTP
os
avia_gt_napi: $Id: avia_gt_napi.c,v 1.187 2003/09/11 23:22:48 obi Exp $FS bootstrap loader (v1.5)
Using /lib/modules/2.4.22-dbox2/m
Using /lib/modules/2.4.22-dbox2/misc/lcd.o
Found fil
Using /lib/
cdkVcInfo $Id: cdkVcInfo.c,v 1.5 20
i2c-core.
caching 504 hoursbridge registered
events are old 60min after their end timeWrev
i2c-core.o: client [dvb] registered
[camd] ca system id: 1722C adapter](pos. 4)
$Id: zapit.cpp,v 1.330 2003/09/17 16:12:01 thegoodguy Exp $:root> debug:
.
dvb_i2c_bridge: enabled DVB i2c bridge to
avia_gt_core: masking unhandled irq reg 0 bit 7
debug: Transmitting BOOTP request
Using
$Id: controld.cpp,v 1.108 2003/08/26 20:13:55 zwen Exp $bug: Given up BOOTP/TFTP bootcd
$Id: cam_napi.c,v 1.7 20
[controld] Boxtype detected: (1, Nokia D-BOX2)otstrap loader (v1.5)
Using /lib/modu
[nhttpd] Neutrino HTTP-Server starting..n 3.1
[camd] no card is in slot #2.4.22-dbox2/misc/avia_a
[camd] a card is i
[cdkVcInfo] Version (Image): 11610200309191036
avia_gt_core: masking unhandled irq re
[camd] no card is in slot #2...........
[camd] a card is in slot #1ndled irq reg 1 bit 13Prote
[neutrino] vcrControl Instance created###
avia_gt_dmx: $Id: avia_gt_dmx.c,v
CVCRControl registered new serverdevice: ngrab
### FS load complete: 648893 bytes loade
[neutrino] menue setupx: loaded ucode vB107
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/ue 0 (is 0x32A00, size 65536), aligning...
[camd] no card is in slot #2 Kernel Image (gzip compr
av
[camd] a card is in slot #1d irq reg 0 bit 6
[CHTTPUpdater] Image-Filename: cdk.cramfs_gt_gv: $Id: avia_gt_gv.c,v 1.34 2003/08/
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
Entry Point: 00000000
avia_gt_gv: set
loading locales: scandir: No such file or
500
[camd] set emm caid 1722 capid 1descramble onid: 0085 sid: 0008 s
(event.event == EVENT_ARATIO_CHAtatus: 1d1d
-------------------------- Bootvorgang abgeschlossen habe Bild ----------
-------------------------- Druck auf Feature Taste (blaue Taste auf FB) -
-------------------------- Druck auf Home Taste auf FB ------------------
-------------------------- Ergebnis im Bootlog --------------------------
Code: Alles auswählen
zapit shot down :)
onds)
Waiting for controld (max. 5 secWaiting for controld (max. 4 seco
[eventserver]: connect (/tmp/neunds)
Waiting for controld (max. 3 sectrino.sock): Connection refused
Waiting for controld (max. 2 seconds)
Waiting for controld (max. 1 seconds)
Starting pid 130, console /dev/c)
Unmounting 'ramfs' on '/tmp'
/tmp: Device or resource busy
umount: Unmounting 'jffs2' on '/var'
The system is going down NOW !![ignfleFiUn] Coa[ignfleFiUn] leabo tenopil f/ve
riinbouxcox/ignfon/coltrcod. fnf wor[nhttpd] stop requested......
t
Sending SIGKILL to all processesstSy hemteal
-------------------------- Box ausgeschaltet -------------------------------
Irgendne Ahnung was da ist? Oder ist das eine "neue Belegung" der
Home-Taste
Man sieht, das Linux brav heruntergahren wird
Gruesse
MausFan
--
'Heute ist nicht alle Tage, ich komm wieder keine Frage..'
