Cable channelscan no go on Sagem 1xI

[JOCKYW2001]

Cable channelscan doesn't work with latest HEAD on my Sagem 1xI
Tried both Telekom/ISH and bruteforce. The GUI shows that 14 transponders are found, one by one the GUI shows a frequency, but no services are scanned. Bootlog returns timeouts. Ca. 1 year old images work fine. The same HEAD on my Philips satbox works fine.

Are there other Sagem1xI users with this problem? Any solutions known?

ciao, JockyW

[obi]

try a different dmx ucode version (i.e. one without hw section filters support in the driver)

[JOCKYW2001]

@obi: great! that did it, both ucode_b107 and ucode_1A work fine

Btw, with ucode_1A the "no video after zapping" bug seems to be gone in latest HEAD

thx, JockyW

[JOCKYW2001]

Btw, with ucode_1A the "no video after zapping" bug seems to be gone in latest HEAD

No it's still there

@obi: is there really no workaround? I can imagine zapit checking whether it's safe before doing the actual zapping

JockyW

[obi]

i don't know. maybe the avia_av driver needs some delays here and there
from zapit's point of view zapping must always be possible. it's a driver issue.

[lawww]

hi,

does your sagem 1xi cable box crash after recording via rc (streaming initialized via the features menu) and zapping afterwards? this is the major "bug" im experiencing while using the head-images.

if this works for you, would you be so nice and post your ucode versions etc?

thanks in advance

lawww

[kerlimann]

i don't know. maybe the avia_av driver needs some delays here and there

meinst du udelay(1500) bei NewChannel? die funktion tauchte (so wie ich das sehe: http://cvs.tuxbox-cvs.sourceforge.net/c ... f_format=s

erst ab v1.74 auf. jetzt weiss ich natuerlich nicht mehr, wann das mit dem blackscreen losging vielleicht sollte da garkein delay hin, wie frueher?

ps: nur so ne wirre idee von mir, falls das die publikumsfrage war

//edit: moin,
also, ich hab das jetzt mal weggelassen, keine aenderung. dann hab ich den wert auf 3000 geaendert, bringt auch nix. auch 10*1000 nicht.

nochwas: wenn ich so durchzappe, von SAT1 angefangen:

<channel serviceID="002e" name="SAT1 [G]" tsid="0021" onid="0085" sat_position="192"/>
<channel serviceID="2ee3" name="RTL [G]" tsid="0441" onid="0001" sat_position="192"/>
<channel serviceID="1f41" name="RTL NRW [G]" tsid="319c" onid="013e" sat_position="130"/>
<channel serviceID="1f72" name="RTL 5E [G]" tsid="000a" onid="0056" sat_position="50"/>
<channel serviceID="2ef4" name="RTL2 [G]" tsid="0441" onid="0001" sat_position="192"/>

kommt IMMER bei RTL2 der blackscreen, nach einem kaltstart der box.

fazit: also diese ucode 001 scheint generell bei mir ein problem zu haben. da kann ich modifizieren was ich will, immer blackscreens.