Gleich lernt sie fliegen ...

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Flapsch
Interessierter
Interessierter
Beiträge: 40
Registriert: Samstag 30. März 2002, 21:58

Gleich lernt sie fliegen ...

Beitrag von Flapsch »

Hallo,

ich bin langsam am Verzweifeln. Hatte vor einiger Zeit Probleme mit meiner Box. Ist hängen gebleiben und nix ging mehr. Da ich schon lange (6 Monate) kein Image mehr upgedatet hatte dachte ich, machst gleich das aktuellste Image drauf (1.6.10). Lief auch alles ganz normal. Kiste an den Fernseher und 'Loading Kernel' ... Das war's dann ... Naja, mach ich halt das alte wieder drauf. Das selbe in grün :evil: . Ich hab mal die Logfiles vom Flashvorgang und vom Serial Bootlog drangehängt. Für mich sieht das so aus als will die Kiste auf einen falschen Adressbereich zugreifen. Was kann ich machen ????

Wäre Super wenn mir jemand Helfen könnte ...

Log vom Flashen:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-c4.cd.3c.07.00.00-90
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.23
debug: Sending TFTP-request for file C/PROGRAMME/DBOXBOOT/ppcboot_writeflash
will verify ELF image, start= 0x7ffd, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x3fff


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-42-fa-c6
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.23
Filename 'C/PROGRAMME/tftpboot/logo-lcd'.
Load address: 0x12fffg
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.23
Filename 'C/PROGRAMME/tftpboot/logo-fb'.
Load address: 0x11fffg
Loading: #########
done
FB logo at: 0x0 (0x1FBFCW bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /D/DBox_2/IMAGES/AlexW/Februar03/alexW2xBaseimageV1.
6.8/alexW2xBaseimageV1.6.8.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.23
Filename '/D/DBox_2/IMAGES/AlexW/Februar03/alexW2xBaseimageV1.6.8/alexW2xBaseima
geV1.6.8.img'.
Load address: 0x11fffg
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
#################################################
done

dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x1001dff0 to 0x107fffff
sector 66 .... done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash... done

Serielles Bootlog:
....................................................
debug: DDF: Calibrating delay loop... debug: DDF: 66.97 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-c4.cd.3c.07.00.00-90
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x7ffd, size= 203620
verify sig: 262
Branching to 0x3fff


PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 1
ÃŽdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-c4.cd.3c.07.00.00-90
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x7ffd, size= 203620
verify sig: 262
Branching to 0x3fff


PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0xfffew
### FS LOAD ERROR<ffffffff> for vmlinuz!
=>
---------------------------------------------------

Ich möchte an dieser Stelle mal all denen danken die sich seit langer Zeit so uneigennützig für dieses Hobby einsetzen und jedem versuchen weiterzuhelfen (sollte auch mal gesagt werden). :P
KeXXeN
Tuxboxer
Tuxboxer
Beiträge: 2634
Registriert: Samstag 15. November 2003, 09:00

Beitrag von KeXXeN »

Was war denn vorher für ein Image drauf? Doch kein AlexW oder?

1. würde ich mal die wirklich aktuelle Version, also die 1.7.1 Version versuchen und nicht die ältere 1.6...
Versuch das Image doch noch mal komplett per Bootmanager einzuspielen.

Anleitung: http://dboxupdate.berlios.de/install.php#basebm

2. scheint deine Box nicht vom Netzwerk starten zu können sonst würde sie doch nicht
debug: Given up BOOTP/TFTP boot
boot net failed
ausgeben, oder?

Vielleicht hilft die schon mal dieser Link híer:

http://www.dietmar-h.net/flashprob.html#boot_net_failed

Das Problem (2) würde ich auf jeden Fall erledigen Bevor du versuchst ein neues Image aufzuspielen.
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Load address: 0x12fffg
Load address: 0x11fffg
Load address: 0x11fffg
Branching to 0x3fff
### FS (cramfs) loading 'vmlinuz' to 0xfffew
Die Adressen sehen alle verdammt ungesund aus - die Box hats wohl hinter sich :-?
There are 10 types of people in the world: those who know binary and those who don't
Flapsch
Interessierter
Interessierter
Beiträge: 40
Registriert: Samstag 30. März 2002, 21:58

Beitrag von Flapsch »

vorher war das AlexW - Image 1.6.8 drauf. Das wollte ich dann ja auch wieder drauf machen. Die Tipps von Dietmar-h-Seite mit 'Boot net failed' habe ich auch schon ausprobiert. Leider ohne Erfolg. Hat jemand noch eine Idee was ich machen kann? Die Box ist erst 2 Jahre alt. Eigentlich wollte ich sie noch nicht wegschmeissen.

Hat jemand noch eine Idee ?????
Tom1069
Erleuchteter
Erleuchteter
Beiträge: 664
Registriert: Donnerstag 4. Juli 2002, 00:53

Beitrag von Tom1069 »

Flash doch dein (hoffentlich) ausgelesenes BN-Image.
Wenn das auch nicht geht, weißt du sicher das etwas defekt ist. :-?
Flapsch
Interessierter
Interessierter
Beiträge: 40
Registriert: Samstag 30. März 2002, 21:58

Beitrag von Flapsch »

ich werd's mal probieren. Vielleicht geht's ja. Ich melde mich wieder ...