grosse problem

Anlaufschwierigkeiten? Was ist was? Worum geht's?
NickDick
Beiträge: 2
Registriert: Donnerstag 18. Dezember 2003, 15:34

grosse problem

Beitrag von NickDick »

ich wollte meine dbox 2 sagem ein chip was gutes tun und wollte neutrino 1.7 oder so druff machen
hatte es per ftp gemacht also das image ind der odner /var/tmp getan
wo ich dann unter sotfware aktuli.......... mein image sah und ausführte.so die dbox hatz neu gebootet und danach kam nix mehr. nur noch loading kernel

dann hab ich ein image über bootmanager auf zu spielen geht auch net

das kommt hier

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-3d.ad.b9.07.00.00-3d
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Sagem -- Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
LCD: ready
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: .. done.

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'
### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>

ich glaube ich schmeisse die bald aus dem fenster

vielleicht kann trotzdem jemand helfen

MFG NICK
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Einfach über den Bootmanager neu flashen, wo ist das Problem?
There are 10 types of people in the world: those who know binary and those who don't
NickDick
Beiträge: 2
Registriert: Donnerstag 18. Dezember 2003, 15:34

Beitrag von NickDick »

es geht einfach net

unten steht immer in der zeile

bootvorgang erkannt;warte auf PPCboot

aber da funtz nix gar nix

ich hab schon jeden scheisse durch

ich weiss nicht mehr was ich machen soll
KeXXeN
Tuxboxer
Tuxboxer
Beiträge: 2634
Registriert: Samstag 15. November 2003, 09:00

Beitrag von KeXXeN »

boot net failed
Da er Aufgrund einer Fehlkonfiguration (evtl Firewall, Router) deines Netzwerkes nicht starten kann.
Versucht er das zu starten was schon auf der Box ist, und das ist kaput.

Deshalb musst du neu flashen.

Zu dem obigen Fehler gibt es hier einen Lösungsvorschlag:

http://www.dietmar-h.net/flashprob.html#boot_net_failed

Wie du ein Image Anständig auf die Box bekommst wird dir hier gezeigt:

http://dboxupdate.berlios.de/install.php#basebm