þdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID xxxxxxxxxxxx
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/o
debug: Got Block #0044
will verify ELF image, start= 0x800000, size= 203252
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
. LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to st
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 640967 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640903 Bytes = 625 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
þdebug: DDF: Calibrating delay loop... debug: D
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID xxxxxxxx
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044
will verify ELF image, start=
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
. LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 640967 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640903 Bytes = 625 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.21-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Jul 6 12
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 251625000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30804k available (1128k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:42:fb:90
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem)
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'Using /lib/modules/2.4.2
1-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
insmod: /lib/modules/2.4.21-dbox2/iisc: No such file or directory
Using /lib/modules/2.4.21-dbox2/misc/info.o
SIOCSIFNETMASK: Cannot assign requested address
insmod: unresolved symbol ioremap
.: Can't open /proc/bus/dbox.sh
SIOCADDRT: Invalid argument
insmod: /lib/modules/2.4.21-dbox2/iisc: No such file or directory
Using /lib/modules/2.4.21-dbox2/misc/event.o
event: init ...
insmod: /lib/modules/2.4.21-dbox2/misc/pda8044h.o: No such file or directory
insmod: /lib/modules/2.4.21-dbox2/misc/res1820.o: No such file or directory
insmod: /lib/modules/2.4.21-dbox2/misc/res1893.o: No such file or directory
insmod: /lib/modules/2.4.21-dbox2/misc/res1993.o: No such file or directory
Using /lib/modules/2.4.21-dbox2/misc/avs.o
insmod: unresolved symbol dbox_get_info
Using /lib/modules/2.4.21-dbox2/misc/saa7126.o
insmod: unresolved symbol dbox_get_info
insmod: /lib/modules/2.4.21-dbox2/iisc: No such file or directory
Using /lib/modules/2.4.21-dbox2/misc/fp.o
insmod: unresolved symbol dbox_get_info
Using /lib/modules/2.4.21-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.21-dbox2/misc/dvbdev.o
insmod: /lib/modules/2.4.21-dbox2/iisc: No such file or directory
Using /lib/modules/2.4.21-dbox2/misc/avia.o
insmod: unresolved symbol fp_do_reset
insmod: unresolved symbol dbox_get_info
insmod: unresolved symbol sprintf
insmod: /lib/modules/2.4.21-dbox2/iisc: No such file or directory
Using /lib/modules/2.4.21-dbox2/misc/cam.o
insmod: unresolved symbol dbox_get_info
insmod: unresolved symbol ioremap.: Can't open /proc/bus/dbox.sh
insmod: unresolved symbol fp_do_reset
insmod: unresolved symbol fp_cam_reset
Using /lib/modules/2.4.21-dbox2/misc/dmxdev.o
insmod: /lib/modules/2.4.21-dbox2/iisc: No such file or directory
Using /lib/modules/2.4.21-dbox2/misc/lcd.o
insmod: /lib/modules/2.4.21-dbox2/iis
insmod: unresolved symbol dbox_get_info
insmod: Using /lib/modules/2.4.21-dbox2/misc/dvb_frontend.o
unresolved symbol kmalloc
LCD (/dev/dbox/lcd0): No such file or directory
/dev/dbox/rc0: No such file or directory
init2: applet not found
Please press Enter to activate this console.
Starting pid 54, console /dev/console: '/bin/sh'BusyBox v1.00-pre1 (2003.07.22-0
So wie ich das Log verstehe, findet er bestimmte Programme bzw. Verzeichnisse in der Linux Dateistruktur nicht . Könnte das auf einen defekten Flash hindeuten oder evtl. eine kalte Lötstelle, so dass nicht alles ausgelesen werden kann?
Wer kann da weiterhelfen? Was noch auffällig ist, das beim Flashen mit Dbox Bootmanager der Fortschritt des Flash Löschen angezeigt wird jedoch nicht der des Flashen selber, was bei meinen anderen Boxen aber immer geht. Vielleicht auch ein Hinweis auf einen defekten Flash Baustein.
Gibt es eine Testmöglichkeit für den Flash, um das herauszufinden ohne die Bausteine zu wechseln? Warum wird der Linux Kernel als richting geprüft und entkomprimiert, beim Satrten findet er aber best. teile des Systems nicht.